Replace magic number with the proper IRQ_TYPE specifier to improve DT
readability.
Signed-off-by: NHernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Replace magic number with the proper IRQ_TYPE specifier to improve DT
readability.
Signed-off-by: NHernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Replace magic number with the proper IRQ_TYPE specifier to improve DT
readability.
Signed-off-by: NHernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

GPIO_ACTIVE_LOW was being used to specify an interrupt, use
IRQ_TYPE_EDGE_RISING instead. This improves DT readability.
Signed-off-by: NHernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Instead of hardcoding the input codes we can use the symbol name for
better readability.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Instead of hardcoding the input codes we can use the symbol name for
better readability.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Instead of hardcoding the input codes we can use the symbol name for
better readability.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

OF graph endpoint connections must be bidirectional and dtc will now
warn if they are not. i.MX7 based DTs have an error and generate
warnings:

Warning (graph_endpoint): /replicator/ports/port@0/endpoint: graph connection to node '/soc/tpiu@30087000/port/endpoint' is not bidirectional
Warning (graph_endpoint): /soc/tpiu@30087000/port/endpoint: graph connection to node '/replicator/ports/port@1/endpoint' is not bidirectional

This appears to be a copy-n-paste error and the TPIU input should be
connected to replicator port 0 instead of port 1.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Single child nodes in OF graph don't need an address and now dtc will
warn about this:

Warning (graph_child_address): /soc/aips@50000000/ldb@53fa8008/lvds-channel@0: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary

Since the LDB should always have an output port, fix the warning by
adding the output port, 2, to the DT.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

OF graph endpoint nodes are supposed to be named 'endpoint' with an
address if there is more than one. The i.MX IPU binding graph has used
unique endpoint names instead which now generate dtc warnings:

Warning (graph_endpoint): /soc/ipu@2400000/port@2/disp0-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@2/hdmi-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@2/mipi-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@2/lvds0-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@2/lvds1-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@3/disp1-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@3/hdmi-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@3/mipi-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@3/lvds0-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2400000/port@3/lvds1-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@2/disp0-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@2/hdmi-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@2/mipi-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@2/lvds0-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@2/lvds1-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@3/hdmi-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@3/mipi-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@3/lvds0-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /soc/ipu@2800000/port@3/lvds1-endpoint: graph endpont node name should be 'endpoint'

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warnings:

arch/arm/boot/dts/imx28-duckbill-2-enocean.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" propert
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Acked-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warnings:

arch/arm/boot/dts/imx28-cfa10049.dtb: Warning (avoid_unnecessary_addr_size): /gpio_keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add the 4th partiton named "mfg" with a block size 64K to store
manufacturing data.
Signed-off-by: NKen Lin <ken.lin@advantech.com.tw>
Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

It replaces underscore with hyphen in aliases name to fix DTC
alias_paths warning below, which is seen with various i.MX board dts
files when W=1 switch is on.

 Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Acked-By: NLothar Waßmann <LW@KARO-electronics.de>
Reviewed-by: NGary Bisson <gary.bisson@boundarydevices.com>

For soc level of clocks which are input to Clock Control Module, clock
driver expects them to be under 'clocks' container node.  But for board
level clocks, this container is not really necessary.  Let's drop it and
use an unique name for fixed rate clock, so that 'reg' property can be
saved as well.
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Acked-By: NLothar Waßmann <LW@KARO-electronics.de>

Instead of copying the whole node hierarchy, let's define a label for
clock osc26m in soc dtsi and use it for overriding clock-frequency.
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The clk32 clock is an input clock to CCM module, and should be defined
in soc dtsi rather than a board level dts.  Let's move it into
imx1.dtsi.

While at it, let's drop unnecessary #address-cells/#size-cells from
'clocks' node to DTC warning avoid_unnecessary_addr_size seen with W=1
switch.
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

It drops unnecessary #address-cells/#size-cells from <soc>.dtsi 'clocks'
node to fix DTC warning avoid_unnecessary_addr_size seen with W=1
switch.
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add egalax touch screen support on i2c2 bus.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

There is a debug LED(D11) connected to GPIO1_IO24,
add support for it.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

i.MX6SX Sabre Auto board has GPIO1_IO13 pin can be
MUXed as WDOG output to reset PMIC, add this function
support.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add FEC support on i.MX6SX Sabre Auto board.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

i.MX6SX Sabre Auto board has two max7310 IO expander on I2C3 bus, add
support for them.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add MAX7322 IO expander support.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add pfuze100 support on i.MX6SX Sabre Auto board.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The board specific pinctrl function container node 'imx6x-sabreauto' is
not really necessary, since commit 5fcdf6a7 ("pinctrl: imx: Allow
parsing DT without function nodes").  Let's drop it to save one level of
indentation.
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Let's drop the 'regulators' container node by giving VCC_SD3 an unique
name and removing 'reg' property, so that the fixed regulator can be
under root node directly.
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The 'fsl,uart-has-rtscts' property is deprecated and it is recommended
to use the generic 'uart-has-rtscts' property instead.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warning:

arch/arm/boot/dts/imx6q-var-dt6customboard.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warning:

arch/arm/boot/dts/imx6q-utilite-pro.dtb: Warning (avoid_unnecessary_addr_size): /encoder: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warnings:

arch/arm/boot/dts/imx6q-b850v3.dtb: Warning (avoid_unnecessary_addr_size): /soc/aips-bus@2100000/i2c@21a4000/mux@70/i2c@1/stdp2690@72: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
arch/arm/boot/dts/imx6q-b850v3.dtb: Warning (avoid_unnecessary_addr_size): /soc/aips-bus@2100000/i2c@21a4000/mux@70/i2c@1/stdp4028@73: unnecessary #address-cells/#size-cells without "ranges" or child
"reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warning:

arch/arm/boot/dts/imx6dl-aristainetos2_4.dtb: Warning (avoid_unnecessary_addr_size): /soc/aips-bus@2000000/spba-bus@2000000/ecspi@2008000/display@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warnings:

arch/arm/boot/dts/imx53-ppd.dtb: Warning (avoid_unnecessary_addr_size): /power-gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
arch/arm/boot/dts/imx53-ppd.dtb: Warning (avoid_unnecessary_addr_size): /touch-lock-key: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warnings:

arch/arm/boot/dts/imx6q-novena.dtb: Warning (avoid_unnecessary_addr_size): /soc/ipu@2400000/port@2: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
arch/arm/boot/dts/imx6q-novena.dtb: Warning (avoid_unnecessary_addr_size): /soc/ipu@2400000/port@3: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
arch/arm/boot/dts/imx6q-novena.dtb: Warning (avoid_unnecessary_addr_size): /soc/ipu@2800000/port@2: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
arch/arm/boot/dts/imx6q-novena.dtb: Warning (avoid_unnecessary_addr_size): /soc/ipu@2800000/port@3: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warnings:

arch/arm/boot/dts/imx6q-novena.dtb: Warning (avoid_unnecessary_addr_size): /soc/aips-bus@2100000/i2c@21a0000/stmpe811@44: unnecessary #address-cells/#size-cells without "ranges" or child "reg"
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells from the switch nodes
to fix the following DTC warnings:

arch/arm/boot/dts/imx6q-b450v3.dtb: Warning (avoid_unnecessary_addr_size): /mdio-gpio/switch@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Remove unnecessary #address-cells/#size-cells to fix the following
DTC warnings:

arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (avoid_unnecessary_addr_size): /soc/aips-bus@2100000/mipi@21e0000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>