- 13 9月, 2006 6 次提交
-
-
由 Mike Kravetz 提交于
Add instrumentation for hypervisor calls on pseries. Call statistics include number of calls, wall time and cpu cycles (if available) and are made available via debugfs. Instrumentation code is behind the HCALL_STATS config option and has no impact if not enabled. Signed-off-by: NMike Kravetz <kravetz@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Base patch for PA6T and PA6T-1682M. This introduces the arch/powerpc/platform/pasemi directory, together with basic implementations for various setup. Much of this was based on other platform code, i.e. Maple, etc. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Introduce PWRficient PA6T cputable entries and feature bits. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Reduce default cacheline size on 64-bit powerpc from 128 bytes to 64. This is the architected minimum. In most cases we'll still end up using cache line information from the device tree, but defaults are used during early boot and doing a few dcbst/icbi's too many there won't do any harm. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Will Schmidt 提交于
In an attempt to make it easier for a power5 optimized app to run on a power4 or a 970 or random earlier machine, this provides emulation of the popcntb instruction. Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
As part of the new irq code pseries_kexec_cpu_down() was split into a xics and mpic version. The vpa unregister logic is now only done in the xics routine, and although that's ok in practice (we don't have SPLPAR machines with mpic), I'd rather have the two concepts stay separate. So move the vpa unregister into pseries_kexec_cpu_down(), which gets called by both the xics and mpic routines. This also gives us an obvious place to put any new kexec-down logic needed in future. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 31 8月, 2006 2 次提交
-
-
由 Paul Mackerras 提交于
This fixes a hang on ppc32. The problem was that I was comparing a 32-bit quantity with a 64-bit quantity, and consequently time wasn't advancing. This makes us use a 64-bit quantity on all platforms, which ends up simplifying the code since we can now get rid of the tb_last_stamp variable (which actually fixes another bug that Ben H and I noticed while going carefully through the code). This works fine on my G4 tibook. Let me know how it goes on your machines. Acked-by: NOlaf Hering <olaf@aepfle.de> Acked-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
As pointed out by Herbert Xu <herbert@gondor.apana.org.au>, our memcpy implementation didn't return the destination pointer as its return value, and there is code in the kernel that expects that. This fixes it. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 8月, 2006 12 次提交
-
-
由 Paul Mackerras 提交于
Eran Ben-Avi <eranpublic@yahoo.com> pointed out that the arch/ppc version of smp_generic_take_timebase disables interrupts on entry but exits without restoring them. However, both it and the arch/powerpc version have another problem, which is that they use local_irq_disable/enable rather than local_irq_save/restore, and they are called with interrupts disabled. This fixes both problems; it changes a return to a break in the arch/ppc version, and changes both versions to use local_irq_save/restore. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This fixes a problem introduced in 5db9fa95. The last_jiffy per-cpu variable is only 32 bits on 32-bit machines, but it was being compared with a 64-bit quantity (tb_next_jiffy), which resulted in time not advancing. This fixes it by changing last_jiffy to be 64 bits on all platforms. With this, we no longer need tb_last_stamp as a 32-bit version of tb_last_jiffy, so this gets rid of tb_last_stamp and we just use tb_last_jiffy instead. This also fixes a bug when the boot cpu is not online, because using tb_last_stamp could have caused the wrong timebase origin value to be used when calculating the time of day. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This code got moved from head.S but the copyright notice on head.S didn't get transferred with it. Noticed by Cort Dougan <cort@fsmlabs.com>. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Will Schmidt 提交于
This problem was noticed by one of the Phyp firmware folks. Our ibm,client-architecture-support call was failing. This corrects the vector length parameters being passed in. Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Device-tree bugs on js20 with some versions of SLOF were causing the interrupt for IDE to not be parsed correctly and fail to boot. This patch adds a bit more sanity checking to the parser to detect some of those errors and fail instead of returning bogus information. The powerpc PCI code can then trigger a fallback that works on those machines. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Zang Roy-r61911 提交于
This adds a new hardware information table for mpic. This enables the mpic code to deal with mpic controllers with different register layouts and hardware behaviours. This introduces CONFIG_MPIC_WEIRD. For boards with non standard mpic controllers, select CONFIG_MPIC_WEIRD and add its hardware information in the mpic_infos[] array. TSI108/109 PIC takes the first index of weird hardware information table. :) The table can be extended. The Tsi108/109 PIC looks like standard OpenPIC but, in fact, is different in register mapping and behavior. The patch does not affect the behavior of standard mpic. If CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to the current code. [benh@kernel.crashing.org: This patch is a slightly cleaned up version of Zang Roy's support for the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new version of the type macros and changes the way MPIC is selected in Kconfig to better match what is done for other system devices. ] Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
When reworking the powerpc irq code, I figured out that we were using the radix tree in a racy way. As a temporary fix, I put a spinlock in there. However, this can have a significant impact on performances. This patch reworks that to use a smarter technique based on the fact that what we need is in fact a rwlock with extremely rare writers (thus optimized for the read path). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Zang Roy-r61911 提交于
This patch adds the mpc7448hpc2 device tree source file. Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kim Phillips 提交于
Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kim Phillips 提交于
This fixes MPC834x MDS (formerly SYS) and ITX platform code to get IRQ data (including PCI) from the device tree, and to use the new IPIC code. renamed defconfig (sys -> mds), left one redundant NULL assignment in mpc83xx_pcibios_fixup to keep the compiler happy. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kim Phillips 提交于
This converts ipic code to Benh's IRQ mods. For the IPIC, IRQ sense values in the device tree equal those in include/linux/irq.h; that's 8 for low assertion (most internal IRQs on mpc83xx), and 2 for high-to-low change. spinlocks added to [un]mask, ack operations; default handler and type now set in host_map; and redundant condition check eliminated. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kim Phillips 提交于
Keep from breaking 83xx arch/ppc build. Back up old school arch/powerpc/sysdev/ipic.[hc] to arch/ppc/syslib. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 25 8月, 2006 14 次提交
-
-
由 Jon Loeliger 提交于
After going through the trouble of setting up the PIC base address in the pic@40000 device tree node, use it instead of the obsolete hard-coded value. Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Matt Porter 提交于
The PIN_SIZE definition name changed, update 44x_mmu.c accordingly. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Matt Porter 提交于
Removes the flush_dcache_all export for non coherent platforms. We removed the last in-kernel user of this years ago in arch/ppc so it no longer serves a purpose. Plus, it breaks the build at the moment. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Only call into RTAS when booted with panic=0 because the RTAS call does not return. The system has to be rebooted via the HMC or via the management console right now. This is cumbersome and not what the default panic=180 is supposed to do. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
gcc 4.1 produces some warnings that say it is ignoring the packed attribute on some structure elements, so, since all the elements of these structs are packed, pack the structs instead. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Several RTAS calls take a "config_addr" parameter, which is a particular way of specifying a PCI busno, devfn and register number into a 32-bit word. Currently these are open-coded, and I'll be adding another soon, replace them with a helper that encapsulates the logic. Be more strict about masking the busno too, just in case. Booted on P5 LPAR. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Just one bit of fallout from the constification of the get_property return value. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Neuling 提交于
The rtas console doesn't have to be Cell specific. If we get both RTAS tokens, we should just enabled the console then and there. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Rename cpu_setup_power4.S to cpu_setup_ppc970.S, since that's really what it is. No functional or other changes. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Whitespace clean up for cell/interrupt.c. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Neuling 提交于
Cleanup some of the #define magic as suggested by Milton. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 24 8月, 2006 1 次提交
-
-
由 Adam Litke 提交于
On Tue, 2006-08-15 at 08:22 -0700, Dave Hansen wrote: > kernel BUG in cache_free_debugcheck at mm/slab.c:2748! Alright, this one is only triggered when slab debugging is enabled. The slabs are assumed to be aligned on a HUGEPTE_TABLE_SIZE boundary. The free path makes use of this assumption and uses the lowest nibble to pass around an index into an array of kmem_cache pointers. With slab debugging turned on, the slab is still aligned, but the "working" object pointer is not. This would break the assumption above that a full nibble is available for the PGF_CACHENUM_MASK. The following patch reduces PGF_CACHENUM_MASK to cover only the two least significant bits, which is enough to cover the current number of 4 pgtable cache types. Then use this constant to mask out the appropriate part of the huge pte pointer. Signed-off-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 8月, 2006 5 次提交
-
-
由 Li Yang 提交于
Compile fails without defining CONFIG_PCI. The patch fix this. [paulus@samba.org: Moved of_irq_pci_swizzle so we only need one #ifdef] Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
When we get an illegal instruction exception, we check to see whether the instruction is one that we emulate for the user program. Some of the masks we use in checking whether the offending instruction is one we care about didn't have the top bit set, which is the MSB of the major opcode. Thus some undefined opcodes could get emulated as other (defined but unimplemented) instructions. This corrects the masks. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Zang Roy-r61911 提交于
The patch passes the UPIO_TSI flag to general 8259 serial driver Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Zang Roy-r61911 提交于
The patch rewrites mpc7448hpc2 board irq support according to the new mpic device tree interface. Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
The bootx_init.c trampoline didn't properly add the ramdisk to the "reserve map" (list of reserved areas of memory), thus causing all sorts of failures when using BootX with an initrd. Also fixes a possible problem if the ramdisk is located before the device-tree passed by BootX. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-