Before commit e28cbf22 ("improve
sys_newuname() for compat architectures") 64-bit x86 had a private
implementation of sys_uname which was just called sys_uname, which other
architectures used for the old uname.

Due to some merge issues with the uname refactoring patches we ended up
calling the old uname version for both the old and new system call
slots, which lead to the domainname filed never be set which caused
failures with libnss_nis.
Reported-and-tested-by: NAndy Isaacson <adi@hexapodia.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can overflow the hardirq stack if we set the %pil here
so early, just let the normal control flow do it.

This is fine as we are allowed to do the actual IRQ enable
at any point after we call trace_hardirqs_on.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It currently overlaps the NMI bit.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recently, we started seeing this on allmodconfig builds:

  CC      mm/memcontrol.o
{standard input}: Assembler messages:
{standard input}:4076: Error: operands mismatch -- statement `subl 12(%fp),170(%a0)' ignored

Correct the asm constraint, like done for m68knommu.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

LibSegFault uses piggybacks sc_fpstate field of the `struct sigcontext'
and this patch avoids LibSegFault overflowing this field.  Also this
removes an unnecessary divergence from classic m68k.
Signed-off-by: NMaxim Kuvyrkov <maxim@codesourcery.com>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

This is a partial revert of 4cd8b5e2 "lguest: use KVM hypercalls";
we revert to using (just as questionable but more reliable) int $15 for
hypercalls.  I didn't revert the register mapping, so we still use the
same calling convention as kvm.

KVM in more recent incarnations stopped injecting a fault when a guest
tried to use the VMCALL instruction from ring 1, so lguest under kvm
fails to make hypercalls.  It was nice to share code with our KVM
cousins, but this was overreach.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Matias Zabaljauregui <zabaljauregui@gmail.com>
Cc: Avi Kivity <avi@redhat.com>

Cosmetic change to mach-at91 Makefile: remove two blanks introduced
by earlier patches.
Signed-off-by: NErnst Schwab <eschwab@online.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When crash happens in interrupt context there is no userspace context.
We always use current->active_mm in those cases.
Signed-off-by: NMika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

From: Imre Deak <imre.deak@nokia.com>

Signal handlers can use floating point, so prevent them to corrupt
the main thread's VFP context. So far there were two signal stack
frame formats defined based on the VFP implementation, but the user
struct used for ptrace covers all posibilities, so use it for the
signal stack too.

Introduce also a new user struct for VFP exception registers. In
this too fields not relevant to the current VFP architecture are
ignored.

Support to save / restore the exception registers was added by
Will Deacon.
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

From: Imre Deak <imre.deak@nokia.com>

Recently the UP versions of these functions were refactored and as
a side effect it became possible to call them for the current thread.
This isn't true for the SMP versions however, so fix this up.
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The VIVT cache of a highmem page is always flushed before the page
is unmapped.  This cache flush is explicit through flush_cache_kmaps()
in flush_all_zero_pkmaps(), or through __cpuc_flush_dcache_area() in
kunmap_atomic().  There is also an implicit flush of those highmem pages
that were part of a process that just terminated making those pages free
as the whole VIVT cache has to be flushed on every task switch. Hence
unmapped highmem pages need no cache maintenance in that case.

However unmapped pages may still be cached with a VIPT cache because the
cache is tagged with physical addresses.  There is no need for a whole
cache flush during task switching for that reason, and despite the
explicit cache flushes in flush_all_zero_pkmaps() and kunmap_atomic(),
some highmem pages that were mapped in user space end up still cached
even when they become unmapped.

So, we do have to perform cache maintenance on those unmapped highmem
pages in the context of DMA when using a VIPT cache.  Unfortunately,
it is not possible to perform that cache maintenance using physical
addresses as all the L1 cache maintenance coprocessor functions accept
virtual addresses only.  Therefore we have no choice but to set up a
temporary virtual mapping for that purpose.

And of course the explicit cache flushing when unmapping a highmem page
on a system with a VIPT cache now can go, which should increase
performance.

While at it, because the code in __flush_dcache_page() has to be modified
anyway, let's also make sure the mapped highmem pages are pinned with
kmap_high_get() for the duration of the cache maintenance operation.
Because kunmap() does unmap highmem pages lazily, it was reported by
Gary King <GKing@nvidia.com> that those pages ended up being unmapped
during cache maintenance on SMP causing segmentation faults.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

From: Julien Langer <julien.langer@gmail.com>

AT91: when turning off the PLLs during suspend, don't wait for the lock
flag to be set. Previously the code would always run into the loop
limitation of 1000 iterations because the flag is never set when turning
the PLLs off.

Comments from Anders Larsen:

 (in http://marc.info/?l=linux-kernel&m=127058929724193&w=2)
Signed-off-by: NJulien Langer <julien.langer@gmail.com>
Signed-off-by: NAnders Larsen <al@alarsen.net>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Otherwise we can overflow the main stack with the function tracer
enabled.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

128 bytes is sufficient for the register window save area, but the
calling conventions allow the callee to save up to 6 incoming argument
registers into the stack frame after the register window save area.

This means a minimal stack frame is 176 bytes (128 + (6 * 8)).

This fixes random crashes when using the function tracer.
Reported-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix forgotten kmemleak headers inclusion for kmemleak_not_leak()
declaration.

This fixes the following build error:

	arch/sparc/kernel/irq_64.c: In function ‘sun4v_build_virq’:
	arch/sparc/kernel/irq_64.c:657: error: implicit declaration of function ‘kmemleak_not_leak’
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Suggested by Peter Zijlstra
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for using the LL TEMAC Ethernet driver on
non-Virtex 5 platforms by adding support for accessing the Soft DMA
registers as if they were memory mapped instead of solely through the
DCR's (available on the Virtex 5).

The patch also updates the driver so that it runs on the MicroBlaze.
The changes were tested on the PowerPC 440, PowerPC 405, and the
MicroBlaze platforms.
Signed-off-by: NJohn Tyner <jtyner@cs.ucr.edu>
Signed-off-by: NJohn Linn <john.linn@xilinx.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Found by kmemleak.

If request_resource() fails, we leak the struct resource we
allocated to represent the IOMMU mapping area.

This actually happens on sun4v machines because the IOMEM area is only
reported sans the IOMMU region, unlike all previous systems.  I'll
need to fix that at some point, but for now fix the leak.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only reference we store to this memory is in the form of a
physical address, so kmemleak can't see it.

Add a kmemleak_not_leak() annotation.

It's probably useful to be able to look at a dump of these things
either via debugfs or similar, and thus we could at some point store
them in some kind of table and therefore get rid of this annotation.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only missing thing was an _sdata marker in vmlinux.lds.S
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's the only way we'll be able to implement the function
graph tracer properly.

A positive is that we no longer have to worry about the
linker over-optimizing the tail call, since we don't
use a tail call any more.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This keeps us from having to use kstat_irqs_cpu() from the NMI handler,
the former of which is a profiled function.

Instead we use a currently empty slot in the cpu_data
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These include the timer implementation, perf events support, and the
performance counter register (pcr) programming layer.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The generic stack tracer does this job just as well.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check function_trace_stop at ftrace_caller

Toss mcount_call and dummy call of ftrace_stub, unnecessary.

Document problems we'll have if the final kernel image link
ever turns on relaxation.

Properly size 'ftrace_call' so it looks right when inspecting
instructions under gdb et al.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we are in an NMI then doing a plain raw_local_irq_disable() will
write PIL_NORMAL_MAX into %pil, which is lower than PIL_NMI, and thus
we'll re-enable NMIs and recurse.

Doing a simple:

	%pil = %pil | PIL_NORMAL_MAX

does what we want, if we're already at PIL_NMI (15) we leave it at
that setting, else we set it to PIL_NORMAL_MAX (14).

This should get the function tracer working on sparc64.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This gets rid of a local function (is_kernel_stack()) which tries to
do the same thing, yet poorly in that it doesn't handle IRQ stacks
properly.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ebase is relative to CKSEG0 not CAC_BASE.  On a 32-bit kernel they
are the same thing, for a 64-bit kernel they are not.

It happens to kind of work on a 64-bit kernel as they both reference
the same physical memory.  However since the CPU uses the CKSEG0 base,
determining if a J instruction will reach always gives the wrong result
unless we use the same number the CPU uses.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1093/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

While playing with the out-of-tree MAE driver module, the system would
panic after a while in the db1200 custom wait code after wakeup due to
a clobbered k0 register being used as target address of a store op.

Remove the custom wait implementation and revert back to the Alchemy-
recommended implementation already set as default.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1092/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (lmo) rsp.
35133692 (kernel.org) break non-GPL modules
that use __vmalloc() or any of the vmap(), vm_map_ram(), etc functions on
MIPS.

All those functions are EXPORT_SYMBOL() so are meant to be allowed to be
used by non-GPL kernel modules.  These calls all take page protection as
an argument which is normally a constant like PAGE_KERNEL.

This commit causes all protection constants like PAGE_KERNEL to not be
constants and instead to contain the GPL-only symbol _page_cachable_default.

This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL
modules to fail to link with the complaint that they are trying to use the
GPL-only symbol _page_cachable_default...

Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for
non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc.
Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
Cc: Chris Dearman <chris@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1084/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The M3 workaround needs to cmpare the region and VPN2 fields only.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below.  Move the variables and functions above
board_prom_init.
Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1077/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is needed for the fix of the M3 workaround.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Previously it was unconditionally used on all Sibyte family SOCs.  The
M3 bug has to be handled in the TLB exception handler which is extremly
performance sensitive, so this modification is expected to deliver around
2-3% performance improvment.  This is important as required changes to the
M3 workaround will make it more costly.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To avoid a glitch during GPIO initialisation read GPIO output register
values left by the firmware.
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/903/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr>
To: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1017/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>