Signed-off-by: NKevin Lo <kevlo@kevlo.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

New driver to read FB-DIMM temperature sensors on systems with the
Intel 5000 series chipsets.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Switch to using input-polldev skeleton instead of implementing polling loop
by itself.  This also fixes problem with trylock on a mutex in atomic
context.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds a new merged driver for FSC sensor chips, it merges the fscher
and fscpos drivers and adds support for the FSC Scylla, Heracles and Heimdall
chips.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

This patch adds support for the SMSC SCH3112, SCH3114, and SCH3116 Super-I/O
chips. These chips feature identical hardware monitoring capabilites with the
expection that some of the fan inputs and pmw outputs don't exist.

The hardware monitoring features of the SCH311x chips can only be accessed via
the ISA bus. The driver therefore registers as a platform driver, if such a
chip is detected.

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Add a driver to export IBM PowerExecutive power meter sensors.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

* Drop HWMON from the dependency list of ABITUGURU3 and LM93: this is
  now handled at menu level.
* Make the Abit, Asus and FSC chip drivers depend on X86. These are
  custom chips which can only be found on their respective manufacturer's
  systems, and these manufacturers only do x86 hardware AFAIK.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Add support for Fintek F75375S/SP and F75373.
Signed-off-by: NRiku Voipio <riku.voipio@movial.fi>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

New driver to expose temperature and fan controls attached to Analog
Devices ADT7470 hwmon chips.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

This is the second version of a new driver for the hardware monitoring features
of the Fintek F71882FG and F71883FG Super-I/O chips. This version has several
small fixes for flaws discovered during the review of the first version.

This version of the driver does not support the pwm part of these chips (yet).
I'll first design a sysfs api for this and post that for discussion, and then
implement pwm support as an incremental patch over this one.

This driver supports all sensors of this chip, except for the vid inputs. The
vid inputs are somewhat documented in the datasheet, but I know nothing about
vid/vrm stuff. Help with this would be much appreciated.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

The Fintek F71806F/FG is compatible with the F71872F/FG, so it is
already supported by the f71805f hardware monitoring driver. In fact,
both chips have the same chip ID, so the driver can't even
differentiate between them.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Switch to using input-polldev skeleton instead of implementing polling
loop by itself.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Acked-by: NMichael Hanselmann <linux-kernel@hansmi.ch>

Switch to using input-polldev skeleton instead of implementing polling loop by
itself.  This also fixes problem with trylock on a mutex in atomic context.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds support for THMC50 and ADM1022 hardware monitoring chips.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

The W83627EHF and similar chips have 6 VID input pins, add support
for them. The driver changes the input voltage level automatically
if the current setting is not correct for the detected CPU model.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Remove i2c-isa from the w83627ehf driver, and use a platform driver
instead.
Signed-off-by: NDavid Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Add description for the W83627DHG chip to Kconfig.
Signed-off-by: NDavid Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

This patch adds support for the LM93 hardware monitoring chip.
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

This patch adds a new driver for the hardware monitoring features of the
third revision of the Abit uGuru chip, found on recent Abit
motherboards. This is an entirely different beast then the first and
second revision (its again a winbond microcontroller, but the "protocol"
to talk to it and the bank addresses are very different.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

This is the patch for converting it87 to a platform driver (and remove i2c-isa).
Signed-off-by: NCorentin LABBE <corentin.labbe@geomatys.fr>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Convert the vt8231 driver from the nonsensical i2c-isa hack to a
regular platform driver.
Signed-off-by: NRoger Lucas <roger@planbit.co.uk>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Convert the sis5595 driver from the nonsensical i2c-isa hack to a
regular platform driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Convert the via686a driver from the nonsensical i2c-isa hack to a
regular platform driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add support for IT8726F chip driver, which is just same as
IT8716F with additional glue logic for AMD power sequencing.
Signed-off-by: NRudolf Marek <r.marek@assembler.cz>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NRainer Birkenmaier <rainer.birkenmaier@siemens.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Convert the pc87360 driver from the nonsensical i2c-isa hack to a
regular platform driver. This is a direct conversion, other cleanups
could happen on top of that.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NJim Cromie <jim.cromie@gmail.com>

Add support for the hardware monitoring and fan control
capabilities of the SMSC DME1737 and Asus A8000 Super-I/O chips.

The hardware monitoring logic of this chip is similar to the LM85 but
has some additional features that this driver supports. Even though
it's a Super-I/O chip, the hardware monitoring logic can only be
accessed via SMBus.

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The dependency upon HWMON is now handled at menu level.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Nicolas Boichat <nicolas@boichat.ch>

Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This driver provides support for the Apple System Management Controller, which
provides an accelerometer (Apple Sudden Motion Sensor), light sensors,
temperature sensors, keyboard backlight control and fan control. Only
Intel-based Apple's computers are supported (MacBook Pro, MacBook, MacMini).

[bunk@stusta.de: make drivers/hwmon/applesmc.c:backlight_work stati]
[khali@linux-fr.org: fix temperature attribute file names]
Signed-off-by: NNicolas Boichat <nicolas@boichat.ch>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.
Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Convert the smsc47b397 driver from the nonsensical i2c-isa hack to a
regular platform driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Reimplement the ISA device support as a platform driver, so that we no
longer rely on i2c-isa.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

A driver for the Analog Devices AD7416, AD7417 and AD7418 chips.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add the support for the digital temperature sensor found in recent
Intel Core CPUs.
Signed-off-by: NRudolf Marek <r.marek@assembler.cz>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Reimplement the ISA device support as a platform driver, so that we no
longer rely on i2c-isa.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This driver supports the Maxim MAX6650 and MAX6651 fan speed
monitoring and control chips.
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Convert the smsc47m1 driver from the nonsensical i2c-isa hack to a
regular platform driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Convert the w83627hf driver from the nonsensical i2c-isa hack to a
regular platform driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The new SMSC LPC47M292 Super-I/O chip is a bit different from the
previous ones, it supports a 3rd fan, but unfortunately the pin
configuration registers are different.
Signed-off-by: NJean Delvare <khali@linux-fr.org>