- 28 4月, 2007 3 次提交
-
-
由 Jouni Malinen 提交于
After 13 years of use, it looks like my email address is finally going to disappear. While this is likely to drop the amount of incoming spam greatly ;-), it may also affect more appropriate messages, so let's update my email address in various places. In addition, Host AP mailing list is subscribers-only and linux-wireless can also be used for discussing issues related to this driver which is now shown in MAINTAINERS. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
It looks like some of the PC Card manfid/product strings were lost when Host AP driver was converted to use PCMCIA_DEVICE_* helpers. This patch adds back D-Link DWL-650 Rev. P1 using the same product ID string match as the pcmcia-cs/cardmgr configuration used before. Signed-off-by: NJouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
The original macros result in gcc 4.2 warning about "cast from pointer to integer of different size" on 64-bit systems. Use of offsetof() on fields in substructures is widespread throughout the kernel code and should work whether offsetof() is defined using __compiler_offsetof() or a cast. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 4月, 2007 9 次提交
-
-
由 Johannes Berg 提交于
This patch refactors the wireless Kconfig all over and already introduces net/wireless/Kconfig with just the WEXT bit for now, the cfg80211 patch will add to that as well. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the places where we need a pointer to the mac header, it is still legal to touch skb->mac.raw directly if just adding to, subtracting from or setting it to another layer header. This one also converts some more cases to skb_reset_mac_header() that my regex missed as it had no spaces before nor after '=', ugh. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
One less thing for drivers writers to worry about. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2007 1 次提交
-
-
由 Ahmed S. Darwish 提交于
A patch to use ARRAY_SIZE macro in the Host AP wireless driver. Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 2月, 2007 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This lets the network core have the ability to handle suspend/resume issues, if it wants to. Thanks to Frederik Deweerdt <frederik.deweerdt@gmail.com> for the arm driver fixes. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 14 12月, 2006 1 次提交
-
-
由 Robert P. J. Day 提交于
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 12月, 2006 1 次提交
-
-
由 Yan Burman 提交于
Replace kmalloc+memset with kzalloc Signed-off-by: NYan Burman <burman.yan@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 12月, 2006 2 次提交
-
-
由 Dominik Brodowski 提交于
struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost all PCMICA driver right at the beginning, using the same calls but slightly different implementations. Unfiy this in the PCMCIA core. Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused label") from and Signed-off-by Adrian Bunk <bunk@stusta.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 02 12月, 2006 1 次提交
-
-
由 John W. Linville 提交于
Clean-up some warnings from missing return code checks, mostly from calling pci_enable_device during a PCI resume. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 11月, 2006 1 次提交
-
-
由 David Howells 提交于
Fix up for make allyesconfig. Signed-Off-By: NDavid Howells <dhowells@redhat.com>
-
- 01 11月, 2006 1 次提交
-
-
由 Pavel Roskin 提交于
The length of the manfid CIS should be at least 4, and it's normally 4. It's incorrect to require it to be at least 5. This breaks support for most (if not all) cards. The right place to ensure that we don't access beyond the CIS buffer is to strengthen another check. Make sure that the next tuple begins at least at the CIS buffer end (in which case we stop processing) or before that. Reported by ph35sm@free.fr Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 10月, 2006 1 次提交
-
-
由 Dominik Brodowski 提交于
As a replacement for the broad manufactor/card ID match we commented out because of conflicts with pcnet_cs, add two product ID matches. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 26 9月, 2006 1 次提交
-
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 9月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 12 9月, 2006 1 次提交
-
-
由 Christian Steineck 提交于
hostap_cs driver - added support for Proxim Harmony PCI W-Lan Card (uses pd6729 based pcmcia2pci bridge) Signed-off-by: NChristian Steineck <memphis@machzwo.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 8月, 2006 1 次提交
-
-
由 Pavel Roskin 提交于
Intersil firmware 1.7.4 (and possibly others) loses the antenna selection settings when the port is reset. Signed-off-by: NDavid Acker <dacker@roinet.com> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 06 7月, 2006 1 次提交
-
-
由 Faidon Liambotis 提交于
This patch adds device IDs for Symbol LA-4123 and Global Sun Tech GL24110P to the HostAP PLX driver. This is not tested with real hardware, but there is no reason why it shouldn't work. Please test. Signed-off-by: NFaidon Liambotis <faidon@cube.gr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 7月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
On Fri, 2006-06-30 at 15:45 -0700, Miles Lane wrote: > Okay, I rebuilt my kernel with your combo patch applied. > Then, I inserted my US Robotics USR2210 PCMCIA wifi card, > ran "pccardutil eject", popped out the card and then inserted > a Compaq iPaq wifi card. This triggered the following. > > [ INFO: possible circular locking dependency detected ] > ------------------------------------------------------- > syslogd/1886 is trying to acquire lock: > (&dev->queue_lock){-+..}, at: [<c11a50b5>] dev_queue_xmit+0x120/0x24b > > but task is already holding lock: > (&dev->_xmit_lock){-+..}, at: [<c11a5118>] dev_queue_xmit+0x183/0x24b > > which lock already depends on the new lock. ok this appears to be hostap playing games... it has 2 network devices for one piece of hardware and one calls the other via the networking layer; there is thankfully a natural ordering between the two, so just making the slave one a separate type ought to make this work. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 2 次提交
-
-
由 Komuro 提交于
Comment out the ID 0xc00f,0x0000 in hostap_cs.c, as it conflicts with the pcnet_cs driver. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 23 5月, 2006 1 次提交
-
-
由 Marcin Juszkiewicz 提交于
Add two Prism cards to hostap_cs driver. product info: "Pretec", "CompactWLAN Card 802.11b", "2.5" manfid: 0x0156, 0x0002 product info: "U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02", "" manfid: 0x0156, 0x0002 Signed-off-by: NMarcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 18 5月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
There's a bunch of unused exports in the wireless drivers; that's bad since unused exports take up quite a bit of space in total; the patch below removes them. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 4月, 2006 1 次提交
-
-
由 Pavel Roskin 提交于
The original code was doing arithmetics on a little-endian value. Reported by Stelios Koroneos <stelios@stelioscellar.com> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 31 3月, 2006 5 次提交
-
-
由 Dominik Brodowski 提交于
Instead of the DEV_OK macro, drivers should use pcmcia_dev_present(). Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-