Initialize the capture source properly for auto model.
It's especially important for cases that only mic is detected.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the beep volume control to ALC268 codec support code.
Since the codec doesn't return the correct AMP caps, we need to override
the value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed ALC662 recording issue.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use a private array for TLV entries of virtual master controls instead
of (supposed) static array.  This cleans up the existing codes.

Also, now vmaster assumes the simple dB-range TLV that is the only type
it can handle.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC262 must have capsrc_nids defined as well as in ALC882.
Also, add a NULL check in alc882_mux_enum_put to avoid Oops.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The last patch for fixing the auto-config pin setting breaks the resume
due to a wrong use of snd_hda_codec_amp_stereo().  The code in the init
hook shouldn't touch the amp cache.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a new mixer switch to enable/disable the sharing of the default
PCM stream with analog and SPDIF outputs.  When "IEC958 Default PCM"
switch is on, the PCM stream is routed both to analog and SPDIF outputs.
This is the behavior in the earlier version.

Turning this switch off has a merit for some codecs, though.  Some codec
chips don't support 24bit formats for SPDIF but only for analog outputs.
In this case, you can use 24bit format by disabling this switch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes some bugs in the auto-configurator of Realtek codecs:
- add missing pin set-up for speaker pins
- fix the speaker auto-mute function not to conflict with the existing
  "Speaker" mixer switch
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up the codes of the capture source selection for Realtek codecs.
Now using common helper functions with the new capsrc_nids field.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed some issues with ALC880 F1734 model
 - fix capture via mic
 - enable volume-wheel control
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

I've just noticed that there are a handful of duplicate controls in the
ALC268 test model mixer.  This patch (against alsa-driver 1.0.16) removes
them.
Signed-off-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the current scheme, PCM device numbers are assigned incrementally
in the order of codecs.  This causes problems when the codec number
is irregular, e.g. codec #0 for HDMI and codec #1 for analog.  Then
the HDMI becomes the first PCM, which is picked up as the default
output device.  Unfortuantely this doesn't work well with normal
setups.

This patch introduced the fixed device numbers for the PCM types,
namely, analog, SPDIF, HDMI and modem.  The PCM devices are assigned
according to the corresponding PCM type.  After this patch, HDMI will
be always assigned to PCM #3, SPDIF to PCM #1, and the first analog
to PCM #0, etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Adds support for zepto laptops with alc268 intel_hda codec.
Signed-off-by: NMirco Tischler <mt-ml@gmx.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the line-out volume control of eeepc p701 to be a proper slave of
the virtual master control.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some models like eeepc ep20 have invalid mixer names that aren't
handled properly by virtual master controls.  Rename them to the
proper names.

Also fixed some typos in the mixer names but they are not compiled
in right now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds a quirk to the Realtek ALC883 table for the Albatron KI690-AM2
motherboard to use the 6stack-dig model.
Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the proper model entry for Fujitsu Lifebook E8410 with ALC262 codec.

From: Tony Vroon <tony@linx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The capture source selection for ADC list with two elements is buggy
becaues of a wrong capture mux list.  This patch fixes the starting
index based on spec->num_adc_nids.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The widget list of capture source selection for ALC883 contains the
wrong NIDs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add SPDIF playback switch to the slave element list so that it
can be toggled via the master control as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the speaker-automute function to ALC262 HP models.
Also, 'Mono' mixer elements are renamed as more intuitive 'Speaker'.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the speaker-automute function to ALC260 HP models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Removed the PCM mixer elements conflicting with others.
Also renamed Master control to Headphone, which isn't a real master.
(The Master control is still created as a virtual master even after
 this rename.)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The PCM mixer elements in HP T5735 model of ALC262 codec conflict
with Speaker and Headphone volumes.  They should be removed.
Ditto for LineOut that is identical with Speaker.
Also, fixed/cleaned up the auto-mute callback to use the amp cache
correctly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Renamed the non-standard mixer elements 'iSpeaker' to 'Speaker'
in Realtek codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NJiang zhe <zhe.jiang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Simplify usage of the Acer Aspire 5310 laptop with the ALC268 based codec
sound card via add correct PCI SSID.
Signed-off-by: NAndy Shevchenko <andy@smile.org.ua>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Simplify usage of the Acer Aspire 5315 laptop with the ALC268 based codec
sound card via add correct PCI SSID.
Signed-off-by: NAndy Shevchenko <andy@smile.org.ua>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fixed the bug that multiple capture streams conflict on Realtek codec
routines.
Also, this adds a framework to enable the alternative playback stream,
e.g. for VoIP.  It's not fully implemented yet, though.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the support of Dell OEM laptops (Vostro 1200) with ALC268 codec.
The new model=dell is provided.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

It turned out that the PCBEEP element (0x1d) is disabled on some hardwares
although it's defined in the datasheet.  Because of the error at info of
this element, the mixer gets totally unusable.
Since the PCBEEP isn't that important feature, it's safer to disable this.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Removed 'FIXME' comments that have been already fixed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch fixes 5.1 surround output and headphone detection in the
Dell Inspiron 530 and possibly other Dell systems using the ALC888
codec (mode 6stack-dell).
Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The ALC auto-probe creates mic boost controls automatically for the
probed pins, but it assumes that they are analog mics.  The digital
mics have no boost controls and must be skipped.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add master controls using vmaster to codecs that have no real hardware
master volume registers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Please refer to the [0003680] on ALSA bugtracking system.
The user found that 'model=mbp3' works and provided the ID.
From: Jiang zhe <zhe.jiang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

1. Support HP rp5700
2. Fixed alc_subsystem_id function (Bug fixed and support Desktop)
3. Support ASUS EP20
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This implements a test model for the ALC268.  It depends on the feature
added by alc260-test-eapd-0.2.diff.  This patch also adds a mention of
the ALC260 test model to ALSA-Configuration.txt since this seems to have
been missed.
Signed-off-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This implements a switch control for the EAPD signal output by the ALC26x
chips.  Since some laptops may utilise this to activate useful things it
is handy to have a control for this in the ALC26x test models.  The patch
includes the control in the ALC260 test model.
Signed-off-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>