Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 27 11月, 2012 1 次提交
    • M
      Revert "mm: remove __GFP_NO_KSWAPD" · 82b212f4
      由 Mel Gorman 提交于 
      With "mm: vmscan: scale number of pages reclaimed by reclaim/compaction
based on failures" reverted, Zdenek Kabelac reported the following

  Hmm,  so it's just took longer to hit the problem and observe
  kswapd0 spinning on my CPU again - it's not as endless like before -
  but still it easily eats minutes - it helps to	turn off  Firefox
  or TB  (memory hungry apps) so kswapd0 stops soon - and restart
  those apps again.  (And I still have like >1GB of cached memory)

  kswapd0         R  running task        0    30      2 0x00000000
  Call Trace:
    preempt_schedule+0x42/0x60
    _raw_spin_unlock+0x55/0x60
    put_super+0x31/0x40
    drop_super+0x22/0x30
    prune_super+0x149/0x1b0
    shrink_slab+0xba/0x510

The sysrq+m indicates the system has no swap so it'll never reclaim
anonymous pages as part of reclaim/compaction.  That is one part of the
problem but not the root cause as file-backed pages could also be
reclaimed.

The likely underlying problem is that kswapd is woken up or kept awake
for each THP allocation request in the page allocator slow path.

If compaction fails for the requesting process then compaction will be
deferred for a time and direct reclaim is avoided.  However, if there
are a storm of THP requests that are simply rejected, it will still be
the the case that kswapd is awake for a prolonged period of time as
pgdat->kswapd_max_order is updated each time.  This is noticed by the
main kswapd() loop and it will not call kswapd_try_to_sleep().  Instead
it will loopp, shrinking a small number of pages and calling
shrink_slab() on each iteration.

The temptation is to supply a patch that checks if kswapd was woken for
THP and if so ignore pgdat->kswapd_max_order but it'll be a hack and not
backed up by proper testing.  As 3.7 is very close to release and this
is not a bug we should release with, a safer path is to revert "mm:
remove __GFP_NO_KSWAPD" for now and revisit it with the view to ironing
out the balance_pgdat() logic in general.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      82b212f4
  3. 22 11月, 2012 1 次提交
    • D
      fix incorrect NR_FREE_PAGES accounting (appears like memory leak) · ef6c5be6
      由 Dave Hansen 提交于 
      There have been some 3.7-rc reports of vm issues, including some kswapd
bugs and, more importantly, some memory "leaks":

	http://www.spinics.net/lists/linux-mm/msg46187.html
	https://bugzilla.kernel.org/show_bug.cgi?id=50181

Commit 1fb3f8ca ("mm: compaction: capture a suitable high-order page
immediately when it is made available") took split_free_page() and
reused it for the compaction code.  It does something curious with
capture_free_page() (previously known as split_free_page()):

  int capture_free_page(struct page *page, int alloc_order,
  ...
          __mod_zone_page_state(zone, NR_FREE_PAGES, -(1UL << order));

  -       /* Split into individual pages */
  -       set_page_refcounted(page);
  -       split_page(page, order);
  +       if (alloc_order != order)
  +               expand(zone, page, alloc_order, order,
  +                       &zone->free_area[order], migratetype);

Note that expand() puts the pages _back_ in the allocator, but it does
not bump NR_FREE_PAGES.  We "return" 'alloc_order' worth of pages, but
we accounted for removing 'order' in the __mod_zone_page_state() call.

For the old split_page()-style use (order==alloc_order) the bug will not
trigger.  But, when called from the compaction code where we
occasionally get a larger page out of the buddy allocator than we need,
we will run in to this.

This patch simply changes the NR_FREE_PAGES manipulation to the correct
'alloc_order' instead of 'order'.

I've been able to repeatedly trigger this in my testing environment.
The amount "leaked" very closely tracks the imbalance I see in buddy
pages vs.  NR_FREE_PAGES.  I have confirmed that this patch fixes the
imbalance
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ef6c5be6
  5. 17 11月, 2012 10 次提交
    • A
      revert "mm: fix-up zone present pages" · 5576646f
      由 Andrew Morton 提交于 
      Revert commit 7f1290f2 ("mm: fix-up zone present pages")

That patch tried to fix a issue when calculating zone->present_pages,
but it caused a regression on 32bit systems with HIGHMEM.  With that
change, reset_zone_present_pages() resets all zone->present_pages to
zero, and fixup_zone_present_pages() is called to recalculate
zone->present_pages when the boot allocator frees core memory pages into
buddy allocator.  Because highmem pages are not freed by bootmem
allocator, all highmem zones' present_pages becomes zero.

Various options for improving the situation are being discussed but for
now, let's return to the 3.6 code.

Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5576646f
    • H
      tmpfs: change final i_blocks BUG to WARNING · 0f3c42f5
      由 Hugh Dickins 提交于 
      Under a particular load on one machine, I have hit shmem_evict_inode()'s
BUG_ON(inode->i_blocks), enough times to narrow it down to a particular
race between swapout and eviction.

It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(),
and the lack of coherent locking between mapping's nrpages and shmem's
swapped count.  There's a window in shmem_writepage(), between lowering
nrpages in shmem_delete_from_page_cache() and then raising swapped
count, when the freed count appears to be +1 when it should be 0, and
then the asymmetry stops it from being corrected with -1 before hitting
the BUG.

One answer is coherent locking: using tree_lock throughout, without
info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on
used_blocks makes that messier than expected.  Another answer may be a
further effort to eliminate the weird shmem_recalc_inode() altogether,
but previous attempts at that failed.

So far undecided, but for now change the BUG_ON to WARN_ON: in usual
circumstances it remains a useful consistency check.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0f3c42f5
    • H
      tmpfs: fix shmem_getpage_gfp() VM_BUG_ON · 215c02bc
      由 Hugh Dickins 提交于 
      Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora
has converted to WARNING) in shmem_getpage_gfp():

  WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70()
  Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ #49
  Call Trace:
    warn_slowpath_common+0x7f/0xc0
    warn_slowpath_null+0x1a/0x20
    shmem_getpage_gfp+0xa5c/0xa70
    shmem_fault+0x4f/0xa0
    __do_fault+0x71/0x5c0
    handle_pte_fault+0x97/0xae0
    handle_mm_fault+0x289/0x350
    __do_page_fault+0x18e/0x530
    do_page_fault+0x2b/0x50
    page_fault+0x28/0x30
    tracesys+0xe1/0xe6

Thanks to Johannes for pointing to truncation: free_swap_and_cache()
only does a trylock on the page, so the page lock we've held since
before confirming swap is not enough to protect against truncation.

What cleanup is needed in this case? Just delete_from_swap_cache(),
which takes care of the memcg uncharge.
Signed-off-by: NHugh Dickins <hughd@google.com>
Reported-by: NDave Jones <davej@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      215c02bc
    • W
      mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address · 498c2280
      由 Will Deacon 提交于 
      kmap_to_page returns the corresponding struct page for a virtual address
of an arbitrary mapping.  This works by checking whether the address
falls in the pkmap region and using the pkmap page tables instead of the
linear mapping if appropriate.

Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is
incorrectly treated as a highmem address and we can end up walking off
the end of pkmap_page_table and subsequently passing junk to pte_page.

This patch fixes the bound check to stay within the pkmap tables.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      498c2280
    • M
      mm: revert "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" · 96710098
      由 Mel Gorman 提交于 
      Jiri Slaby reported the following:

	(It's an effective revert of "mm: vmscan: scale number of pages
	reclaimed by reclaim/compaction based on failures".) Given kswapd
	had hours of runtime in ps/top output yesterday in the morning
	and after the revert it's now 2 minutes in sum for the last 24h,
	I would say, it's gone.

The intention of the patch in question was to compensate for the loss of
lumpy reclaim.  Part of the reason lumpy reclaim worked is because it
aggressively reclaimed pages and this patch was meant to be a sane
compromise.

When compaction fails, it gets deferred and both compaction and
reclaim/compaction is deferred avoid excessive reclaim.  However, since
commit c6543459 ("mm: remove __GFP_NO_KSWAPD"), kswapd is woken up
each time and continues reclaiming which was not taken into account when
the patch was developed.

Attempts to address the problem ended up just changing the shape of the
problem instead of fixing it.  The release window gets closer and while
a THP allocation failing is not a major problem, kswapd chewing up a lot
of CPU is.

This patch reverts commit 83fde0f2 ("mm: vmscan: scale number of
pages reclaimed by reclaim/compaction based on failures") and will be
revisited in the future.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Tested-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      96710098
    • X
      swapfile: fix name leak in swapoff · f58b59c1
      由 Xiaotian Feng 提交于 
      There's a name leak introduced by commit 91a27b2a ("vfs: define
struct filename and have getname() return it").  Add the missing
putname.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: NXiaotian Feng <dannyfeng@tencent.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f58b59c1
    • H
      memcg: fix hotplugged memory zone oops · bea8c150
      由 Hugh Dickins 提交于 
      When MEMCG is configured on (even when it's disabled by boot option),
when adding or removing a page to/from its lru list, the zone pointer
used for stats updates is nowadays taken from the struct lruvec.  (On
many configurations, calculating zone from page is slower.)

But we have no code to update all the lruvecs (per zone, per memcg) when
a memory node is hotadded.  Here's an extract from the oops which
results when running numactl to bind a program to a newly onlined node:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000f60
  IP:  __mod_zone_page_state+0x9/0x60
  Pid: 1219, comm: numactl Not tainted 3.6.0-rc5+ #180 Bochs Bochs
  Process numactl (pid: 1219, threadinfo ffff880039abc000, task ffff8800383c4ce0)
  Call Trace:
    __pagevec_lru_add_fn+0xdf/0x140
    pagevec_lru_move_fn+0xb1/0x100
    __pagevec_lru_add+0x1c/0x30
    lru_add_drain_cpu+0xa3/0x130
    lru_add_drain+0x2f/0x40
   ...

The natural solution might be to use a memcg callback whenever memory is
hotadded; but that solution has not been scoped out, and it happens that
we do have an easy location at which to update lruvec->zone.  The lruvec
pointer is discovered either by mem_cgroup_zone_lruvec() or by
mem_cgroup_page_lruvec(), and both of those do know the right zone.

So check and set lruvec->zone in those; and remove the inadequate
attempt to set lruvec->zone from lruvec_init(), which is called before
NODE_DATA(node) has been allocated in such cases.

Ah, there was one exceptionr.  For no particularly good reason,
mem_cgroup_force_empty_list() has its own code for deciding lruvec.
Change it to use the standard mem_cgroup_zone_lruvec() and
mem_cgroup_get_lru_size() too.  In fact it was already safe against such
an oops (the lru lists in danger could only be empty), but we're better
proofed against future changes this way.

I've marked this for stable (3.6) since we introduced the problem in 3.5
(now closed to stable); but I have no idea if this is the only fix
needed to get memory hotadd working with memcg in 3.6, and received no
answer when I enquired twice before.
Reported-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bea8c150
    • M
      memcg: oom: fix totalpages calculation for memory.swappiness==0 · 9a5a8f19
      由 Michal Hocko 提交于 
      oom_badness() takes a totalpages argument which says how many pages are
available and it uses it as a base for the score calculation.  The value
is calculated by mem_cgroup_get_limit which considers both limit and
total_swap_pages (resp.  memsw portion of it).

This is usually correct but since fe35004f ("mm: avoid swapping out
with swappiness==0") we do not swap when swappiness is 0 which means
that we cannot really use up all the totalpages pages.  This in turn
confuses oom score calculation if the memcg limit is much smaller than
the available swap because the used memory (capped by the limit) is
negligible comparing to totalpages so the resulting score is too small
if adj!=0 (typically task with CAP_SYS_ADMIN or non zero oom_score_adj).
A wrong process might be selected as result.

The problem can be worked around by checking mem_cgroup_swappiness==0
and not considering swap at all in such a case.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9a5a8f19
    • D
      mm: fix build warning for uninitialized value · 1756954c
      由 David Rientjes 提交于 
      do_wp_page() sets mmun_called if mmun_start and mmun_end were
initialized and, if so, may call mmu_notifier_invalidate_range_end()
with these values.  This doesn't prevent gcc from emitting a build
warning though:

  mm/memory.c: In function `do_wp_page':
  mm/memory.c:2530: warning: `mmun_start' may be used uninitialized in this function
  mm/memory.c:2531: warning: `mmun_end' may be used uninitialized in this function

It's much easier to initialize the variables to impossible values and do
a simple comparison to determine if they were initialized to remove the
bool entirely.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1756954c
    • M
      mm: add anon_vma_lock to validate_mm() · 63c3b902
      由 Michel Lespinasse 提交于 
      Iterating over the vma->anon_vma_chain without anon_vma_lock may cause
NULL ptr deref in anon_vma_interval_tree_verify(), because the node in the
chain might have been removed.

  BUG: unable to handle kernel paging request at fffffffffffffff0
  IP: [<ffffffff8122c29c>] anon_vma_interval_tree_verify+0xc/0xa0
  PGD 4e28067 PUD 4e29067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU 0
  Pid: 9050, comm: trinity-child64 Tainted: G        W    3.7.0-rc2-next-20121025-sasha-00001-g673f98e-dirty #77
  RIP: 0010: anon_vma_interval_tree_verify+0xc/0xa0
  Process trinity-child64 (pid: 9050, threadinfo ffff880045f80000, task ffff880048eb0000)
  Call Trace:
    validate_mm+0x58/0x1e0
    vma_adjust+0x635/0x6b0
    __split_vma.isra.22+0x161/0x220
    split_vma+0x24/0x30
    sys_madvise+0x5da/0x7b0
    tracesys+0xe1/0xe6
  RIP  anon_vma_interval_tree_verify+0xc/0xa0
  CR2: fffffffffffffff0

Figured out by Bob Liu.
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Bob Liu <lliubbo@gmail.com>
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      63c3b902
  7. 09 11月, 2012 1 次提交
  9. 26 10月, 2012 4 次提交
    • D
      mm, numa: avoid setting zone_reclaim_mode unless a node is sufficiently distant · 6b187d02
      由 David Rientjes 提交于 
      Commit 957f822a ("mm, numa: reclaim from all nodes within reclaim
distance") caused zone_reclaim_mode to be set for all systems where two
nodes are within RECLAIM_DISTANCE of each other.  This is the opposite
of what we actually want: zone_reclaim_mode should be set if two nodes
are sufficiently distant.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NJulian Wollrath <jwollrath@web.de>
Tested-by: NJulian Wollrath <jwollrath@web.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Patrik Kullman <patrik.kullman@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6b187d02
    • G
      mm/mmu_notifier: allocate mmu_notifier in advance · 35cfa2b0
      由 Gavin Shan 提交于 
      While allocating mmu_notifier with parameter GFP_KERNEL, swap would start
to work in case of tight available memory.  Eventually, that would lead to
a deadlock while the swap deamon swaps anonymous pages.  It was caused by
commit e0f3c3f7 ("mm/mmu_notifier: init notifier if necessary").

  =================================
  [ INFO: inconsistent lock state ]
  3.7.0-rc1+ #518 Not tainted
  ---------------------------------
  inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
  kswapd0/35 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (&mapping->i_mmap_mutex){+.+.?.}, at: page_referenced+0x9c/0x2e0
  {RECLAIM_FS-ON-W} state was registered at:
     mark_held_locks+0x86/0x150
     lockdep_trace_alloc+0x67/0xc0
     kmem_cache_alloc_trace+0x33/0x230
     do_mmu_notifier_register+0x87/0x180
     mmu_notifier_register+0x13/0x20
     kvm_dev_ioctl+0x428/0x510
     do_vfs_ioctl+0x98/0x570
     sys_ioctl+0x91/0xb0
     system_call_fastpath+0x16/0x1b
  irq event stamp: 825
  hardirqs last  enabled at (825): _raw_spin_unlock_irq+0x30/0x60
  hardirqs last disabled at (824): _raw_spin_lock_irq+0x19/0x80
  softirqs last  enabled at (0): copy_process+0x630/0x17c0
  softirqs last disabled at (0): (null)
  ...

Simply back out the above commit, which was a small performance
optimization.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Reported-by: NAndrea Righi <andrea@betterlinux.com>
Tested-by: NAndrea Righi <andrea@betterlinux.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Sagi Grimberg <sagig@mellanox.co.il>
Cc: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      35cfa2b0
    • B
      mm/page_alloc.c:alloc_contig_range(): return early for err path · 86a595f9
      由 Bob Liu 提交于 
      If start_isolate_page_range() failed, unset_migratetype_isolate() has been
done inside it.
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Ni zhan Chen <nizhan.chen@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      86a595f9
    • J
      mm: fix XFS oops due to dirty pages without buffers on s390 · ef5d437f
      由 Jan Kara 提交于 
      On s390 any write to a page (even from kernel itself) sets architecture
specific page dirty bit.  Thus when a page is written to via buffered
write, HW dirty bit gets set and when we later map and unmap the page,
page_remove_rmap() finds the dirty bit and calls set_page_dirty().

Dirtying of a page which shouldn't be dirty can cause all sorts of
problems to filesystems.  The bug we observed in practice is that
buffers from the page get freed, so when the page gets later marked as
dirty and writeback writes it, XFS crashes due to an assertion
BUG_ON(!PagePrivate(page)) in page_buffers() called from
xfs_count_page_state().

Similar problem can also happen when zero_user_segment() call from
xfs_vm_writepage() (or block_write_full_page() for that matter) set the
hardware dirty bit during writeback, later buffers get freed, and then
page unmapped.

Fix the issue by ignoring s390 HW dirty bit for page cache pages of
mappings with mapping_cap_account_dirty().  This is safe because for
such mappings when a page gets marked as writeable in PTE it is also
marked dirty in do_wp_page() or do_page_fault().  When the dirty bit is
cleared by clear_page_dirty_for_io(), the page gets writeprotected in
page_mkclean().  So pagecache page is writeable if and only if it is
dirty.

Thanks to Hugh Dickins for pointing out mapping has to have
mapping_cap_account_dirty() for things to work and proposing a cleaned
up variant of the patch.

The patch has survived about two hours of running fsx-linux on tmpfs
while heavily swapping and several days of running on out build machines
where the original problem was triggered.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org>		[3.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ef5d437f
  11. 25 10月, 2012 1 次提交
  13. 23 10月, 2012 1 次提交
  15. 20 10月, 2012 2 次提交
  17. 17 10月, 2012 1 次提交
    • D
      mm, mempolicy: fix printing stack contents in numa_maps · 32f8516a
      由 David Rientjes 提交于 
      When reading /proc/pid/numa_maps, it's possible to return the contents of
the stack where the mempolicy string should be printed if the policy gets
freed from beneath us.

This happens because mpol_to_str() may return an error the
stack-allocated buffer is then printed without ever being stored.

There are two possible error conditions in mpol_to_str():

 - if the buffer allocated is insufficient for the string to be stored,
   and

 - if the mempolicy has an invalid mode.

The first error condition is not triggered in any of the callers to
mpol_to_str(): at least 50 bytes is always allocated on the stack and this
is sufficient for the string to be written.  A future patch should convert
this into BUILD_BUG_ON() since we know the maximum strlen possible, but
that's not -rc material.

The second error condition is possible if a race occurs in dropping a
reference to a task's mempolicy causing it to be freed during the read().
The slab poison value is then used for the mode and mpol_to_str() returns
-EINVAL.

This race is only possible because get_vma_policy() believes that
mm->mmap_sem protects task->mempolicy, which isn't true.  The exit path
does not hold mm->mmap_sem when dropping the reference or setting
task->mempolicy to NULL: it uses task_lock(task) instead.

Thus, it's required for the caller of a task mempolicy to hold
task_lock(task) while grabbing the mempolicy and reading it.  Callers with
a vma policy store their mempolicy earlier and can simply increment the
reference count so it's guaranteed not to be freed.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      32f8516a
  19. 15 10月, 2012 1 次提交
  21. 13 10月, 2012 2 次提交
    • J
      vfs: make path_openat take a struct filename pointer · 669abf4e
      由 Jeff Layton 提交于 
      ...and fix up the callers. For do_file_open_root, just declare a
struct filename on the stack and fill out the .name field. For
do_filp_open, make it also take a struct filename pointer, and fix up its
callers to call it appropriately.

For filp_open, add a variant that takes a struct filename pointer and turn
filp_open into a wrapper around it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      669abf4e
    • J
      vfs: define struct filename and have getname() return it · 91a27b2a
      由 Jeff Layton 提交于 
      getname() is intended to copy pathname strings from userspace into a
kernel buffer. The result is just a string in kernel space. It would
however be quite helpful to be able to attach some ancillary info to
the string.

For instance, we could attach some audit-related info to reduce the
amount of audit-related processing needed. When auditing is enabled,
we could also call getname() on the string more than once and not
need to recopy it from userspace.

This patchset converts the getname()/putname() interfaces to return
a struct instead of a string. For now, the struct just tracks the
string in kernel space and the original userland pointer for it.

Later, we'll add other information to the struct as it becomes
convenient.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      91a27b2a
  23. 10 10月, 2012 3 次提交
    • J
      mm, slab: release slab_mutex earlier in kmem_cache_destroy() · 210ed9de
      由 Jiri Kosina 提交于 
      Commit 1331e7a1 ("rcu: Remove _rcu_barrier() dependency on
__stop_machine()") introduced slab_mutex -> cpu_hotplug.lock dependency
through kmem_cache_destroy() -> rcu_barrier() -> _rcu_barrier() ->
get_online_cpus().

Lockdep thinks that this might actually result in ABBA deadlock,
and reports it as below:

=== [ cut here ] ===
 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.6.0-rc5-00004-g0d8ee37e #143 Not tainted
 -------------------------------------------------------
 kworker/u:2/40 is trying to acquire lock:
  (rcu_sched_state.barrier_mutex){+.+...}, at: [<ffffffff810f2126>] _rcu_barrier+0x26/0x1e0

 but task is already holding lock:
  (slab_mutex){+.+.+.}, at: [<ffffffff81176e15>] kmem_cache_destroy+0x45/0xe0

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #2 (slab_mutex){+.+.+.}:
        [<ffffffff810ae1e2>] validate_chain+0x632/0x720
        [<ffffffff810ae5d9>] __lock_acquire+0x309/0x530
        [<ffffffff810ae921>] lock_acquire+0x121/0x190
        [<ffffffff8155d4cc>] __mutex_lock_common+0x5c/0x450
        [<ffffffff8155d9ee>] mutex_lock_nested+0x3e/0x50
        [<ffffffff81558cb5>] cpuup_callback+0x2f/0xbe
        [<ffffffff81564b83>] notifier_call_chain+0x93/0x140
        [<ffffffff81076f89>] __raw_notifier_call_chain+0x9/0x10
        [<ffffffff8155719d>] _cpu_up+0xba/0x14e
        [<ffffffff815572ed>] cpu_up+0xbc/0x117
        [<ffffffff81ae05e3>] smp_init+0x6b/0x9f
        [<ffffffff81ac47d6>] kernel_init+0x147/0x1dc
        [<ffffffff8156ab44>] kernel_thread_helper+0x4/0x10

 -> #1 (cpu_hotplug.lock){+.+.+.}:
        [<ffffffff810ae1e2>] validate_chain+0x632/0x720
        [<ffffffff810ae5d9>] __lock_acquire+0x309/0x530
        [<ffffffff810ae921>] lock_acquire+0x121/0x190
        [<ffffffff8155d4cc>] __mutex_lock_common+0x5c/0x450
        [<ffffffff8155d9ee>] mutex_lock_nested+0x3e/0x50
        [<ffffffff81049197>] get_online_cpus+0x37/0x50
        [<ffffffff810f21bb>] _rcu_barrier+0xbb/0x1e0
        [<ffffffff810f22f0>] rcu_barrier_sched+0x10/0x20
        [<ffffffff810f2309>] rcu_barrier+0x9/0x10
        [<ffffffff8118c129>] deactivate_locked_super+0x49/0x90
        [<ffffffff8118cc01>] deactivate_super+0x61/0x70
        [<ffffffff811aaaa7>] mntput_no_expire+0x127/0x180
        [<ffffffff811ab49e>] sys_umount+0x6e/0xd0
        [<ffffffff81569979>] system_call_fastpath+0x16/0x1b

 -> #0 (rcu_sched_state.barrier_mutex){+.+...}:
        [<ffffffff810adb4e>] check_prev_add+0x3de/0x440
        [<ffffffff810ae1e2>] validate_chain+0x632/0x720
        [<ffffffff810ae5d9>] __lock_acquire+0x309/0x530
        [<ffffffff810ae921>] lock_acquire+0x121/0x190
        [<ffffffff8155d4cc>] __mutex_lock_common+0x5c/0x450
        [<ffffffff8155d9ee>] mutex_lock_nested+0x3e/0x50
        [<ffffffff810f2126>] _rcu_barrier+0x26/0x1e0
        [<ffffffff810f22f0>] rcu_barrier_sched+0x10/0x20
        [<ffffffff810f2309>] rcu_barrier+0x9/0x10
        [<ffffffff81176ea1>] kmem_cache_destroy+0xd1/0xe0
        [<ffffffffa04c3154>] nf_conntrack_cleanup_net+0xe4/0x110 [nf_conntrack]
        [<ffffffffa04c31aa>] nf_conntrack_cleanup+0x2a/0x70 [nf_conntrack]
        [<ffffffffa04c42ce>] nf_conntrack_net_exit+0x5e/0x80 [nf_conntrack]
        [<ffffffff81454b79>] ops_exit_list+0x39/0x60
        [<ffffffff814551ab>] cleanup_net+0xfb/0x1b0
        [<ffffffff8106917b>] process_one_work+0x26b/0x4c0
        [<ffffffff81069f3e>] worker_thread+0x12e/0x320
        [<ffffffff8106f73e>] kthread+0x9e/0xb0
        [<ffffffff8156ab44>] kernel_thread_helper+0x4/0x10

 other info that might help us debug this:

 Chain exists of:
   rcu_sched_state.barrier_mutex --> cpu_hotplug.lock --> slab_mutex

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(slab_mutex);
                                lock(cpu_hotplug.lock);
                                lock(slab_mutex);
   lock(rcu_sched_state.barrier_mutex);

  *** DEADLOCK ***
=== [ cut here ] ===

This is actually a false positive. Lockdep has no way of knowing the fact
that the ABBA can actually never happen, because of special semantics of
cpu_hotplug.refcount and its handling in cpu_hotplug_begin(); the mutual
exclusion there is not achieved through mutex, but through
cpu_hotplug.refcount.

The "neither cpu_up() nor cpu_down() will proceed past cpu_hotplug_begin()
until everyone who called get_online_cpus() will call put_online_cpus()"
semantics is totally invisible to lockdep.

This patch therefore moves the unlock of slab_mutex so that rcu_barrier()
is being called with it unlocked. It has two advantages:

- it slightly reduces hold time of slab_mutex; as it's used to protect
  the cachep list, it's not necessary to hold it over kmem_cache_free()
  call any more
- it silences the lockdep false positive warning, as it avoids lockdep ever
  learning about slab_mutex -> cpu_hotplug.lock dependency
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NPekka Enberg <penberg@kernel.org>
      210ed9de
    • H
      tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking · 35c2a7f4
      由 Hugh Dickins 提交于 
      Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(),
	u64 inum = fid->raw[2];
which is unhelpfully reported as at the end of shmem_alloc_inode():

BUG: unable to handle kernel paging request at ffff880061cd3000
IP: [<ffffffff812190d0>] shmem_alloc_inode+0x40/0x40
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Call Trace:
 [<ffffffff81488649>] ? exportfs_decode_fh+0x79/0x2d0
 [<ffffffff812d77c3>] do_handle_open+0x163/0x2c0
 [<ffffffff812d792c>] sys_open_by_handle_at+0xc/0x10
 [<ffffffff83a5f3f8>] tracesys+0xe1/0xe6

Right, tmpfs is being stupid to access fid->raw[2] before validating that
fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may
fall at the end of a page, and the next page not be present.

But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being
careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and
could oops in the same way: add the missing fh_len checks to those.
Reported-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sage Weil <sage@inktank.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      35c2a7f4
    • A
      mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN · baaf1dd4
      由 Arnd Bergmann 提交于 
      The definition of ARCH_SLAB_MINALIGN is architecture dependent
and can be either of type size_t or int. Comparing that value
with ARCH_KMALLOC_MINALIGN can cause harmless warnings on
platforms where they are different. Since both are always
small positive integer numbers, using the size_t type to compare
them is safe and gets rid of the warning.

Without this patch, building ARM collie_defconfig results in:

mm/slob.c: In function '__kmalloc_node':
mm/slob.c:431:152: warning: comparison of distinct pointer types lacks a cast [enabled by default]
mm/slob.c: In function 'kfree':
mm/slob.c:484:153: warning: comparison of distinct pointer types lacks a cast [enabled by default]
mm/slob.c: In function 'ksize':
mm/slob.c:503:153: warning: comparison of distinct pointer types lacks a cast [enabled by default]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
      baaf1dd4
  25. 09 10月, 2012 12 次提交