- cluster/sys.c: make needlessly global code static
- dlm/: "extern" declarations for variables belong into header files
        (and in this case, they are already in dlmdomain.h)
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Link the code into the kernel build system. OCFS2 is marked as
experimental.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>

The OCFS2 file system module.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>

dlmfs: A minimal dlm userspace interface implemented via a virtual
file system.
Most of the OCFS2 tools make use of this to take cluster locks when
doing operations on the file system.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>

A distributed lock manager built with the cluster file system use case
in mind. The OCFS2 dlm exposes a VMS style API, though things have
been simplified internally. The only lock levels implemented currently
are NLMODE, PRMODE and EXMODE.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>

Node messaging via tcp. Used by the dlm and the file system for point
to point communication between nodes.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>

Disk based heartbeat. Configured and started from userspace, the
kernel component handles I/O submission and event generation via
callback mechanism.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>

A simple node information service, filled and updated from
userspace. The rest of the stack queries this service for simple node
information.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>

Very simple printk wrapper which adds the ability to enable various
sets of debug messages at run-time.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>

readpage(), prepare_write(), and commit_write() callers are updated to
understand the special return code AOP_TRUNCATED_PAGE in the style of
writepage() and WRITEPAGE_ACTIVATE.  AOP_TRUNCATED_PAGE tells the caller that
the callee has unlocked the page and that the operation should be tried again
with a new page.  OCFS2 uses this to detect and work around a lock inversion in
its aop methods.  There should be no change in behaviour for methods that don't
return AOP_TRUNCATED_PAGE.

WRITEPAGE_ACTIVATE is also prepended with AOP_ for consistency and they are
made enums so that kerneldoc can be used to document their semantics.
Signed-off-by: NZach Brown <zach.brown@oracle.com>

Configfs, a file system for userspace-driven kernel object configuration.
The OCFS2 stack makes extensive use of this for propagation of cluster
configuration information into kernel.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

The old /proc interfaces were never updated to use loff_t, and are just
generally broken.  Now, we should be using the seq_file interface for
all of the proc files, but converting the legacy functions is more work
than most people care for and has little upside..

But at least we can make the non-LFS rules explicit, rather than just
insanely wrapping the offset or something.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Prevent page->index << PAGE_CACHE_SHIFT from overflowing.

There is a casting there, but was added without care, so it's at the wrong
place. Note the extra parens around the shift - "+" is higher precedence than
"<<", leading to a GCC warning which saved all us.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Trivial removal of unused variable from this file - doesn't even change the
generated assembly code, in fact (gcc should trigger a warning for unused value
here).
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NFS client prevents mandatory lock, but there is a flaw on it; Locks are
possibly left if the mode is changed while locking.

This permits unlocking even if the mandatory lock bits are set.
Signed-off-by: NASANO Masahiro <masano@tnes.nec.co.jp>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's currently a diagnostic printk in relay_switch_subbuf() meant as
a warning if you accidentally try to log an event larger than the
sub-buffer size.

The problem is if this happens while logging from somewhere it's not
safe to be doing printks, such as in the scheduler, you can end up with
a deadlock.  This patch removes the warning from relay_switch_subbuf()
and instead prints some diagnostic info when the channel is closed.

Thanks to Mathieu Desnoyers for pointing out the problem and
suggesting a fix.
Signed-off-by: NTom Zanussi <zanussi@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We must check for MAY_SATTR before setting acls, which includes checking
for read-only exports: the lower-level setxattr operation that
eventually sets the acl cannot check export-level restrictions.

Bug reported by Martin Walter <mawa@uni-freiburg.de>.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 When mixing -olock and -onolock mounts on the same client, we have to
 check that fl->fl_u.nfs_fl.owner is set before dereferencing it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Ensure we call unmap_mapping_range() and sync dirty pages to disk before
 doing an NFS direct write.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch fixes a bug where if the journal is aborted, it can
leave a transaction open.  The result will be a BUG when another code
path attempts to start a transaction and will get a "nesting into
different fs" error, since current->journal_info will be left non-NULL.

Original fix against SUSE kernel by Chris Mason <mason@suse.com>
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This should have been part of the original io error patch, but got
dropped somewhere along the way.

It's extremely important when handling the i/o error in the journal to
not commit the transaction with corrupt data.  This patch adds that code
back in.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The below patch lets userspace have more control over the inodes that
inotify will watch.  It introduces two new flags.

        IN_ONLYDIR -- only watch the inode if it is a directory.
        This is needed to avoid the race that can occur when we want to be
        sure that we are watching a directory.

        IN_DONT_FOLLOW -- don't follow a symlink.  In combination
        with IN_ONLYDIR we can make sure that we don't watch the target of
        symlinks.

The issues the flags fix came up when writing the gnome-vfs inotify
backend.  Default behaviour is unchanged.
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Acked-by: NRobert Love <rml@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit f549d6c1 introduced a generic
fallback for security xattrs, but appears to include a subtle bug.

Gentoo users with kernels with selinux compiled in, and coreutils compiled
with acl support, noticed that they could not copy files on tmpfs using
'cp'.

cp (compiled with acl support) copies the file, lists the extended
attributes on the old file, copies them all to the new file, and then
exits.  However the listxattr() calls were failing with this odd behaviour:

llistxattr("a.out", (nil), 0)           = 17
llistxattr("a.out", 0x7fffff8c6cb0, 17) = -1 ERANGE (Numerical result out of
range)

I believe this is a simple problem in the logic used to check the buffer
sizes; if the user sends a buffer the exact size of the data, then its ok
:)

This change solves the problem.
More info can be found at http://bugs.gentoo.org/113138Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Acked-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 - Missing initialisation of attribute bitmask in _nfs4_proc_write()
 - On success, _nfs4_proc_write() must return number of bytes written.
 - Missing post_op_update_inode() in _nfs4_proc_write()
 - Missing initialisation of attribute bitmask in _nfs4_proc_commit()
 - Missing post_op_update_inode() in _nfs4_proc_commit()
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

  - Missing nfs_mark_for_revalidate in nfs_proc_link()
  - Missing nfs_mark_for_revalidate in nfs_rename()
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Ensure that we use set_page_writeback() in the appropriate places
 to help the VM in keeping its page radix_tree in sync.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Steve Dickson writes:
 Doing the following:
 1. On server:
 $ mkdir ~/t
 $ echo Hello > ~/t/tmp

 2. On client, wait for a string to appear in this file:
 $ until grep -q foo t/tmp ; do echo -n . ; sleep 1 ; done

 3. On server, create a *new* file with the same name containing that
 string:
 $ mv ~/t/tmp ~/t/tmp.old; echo foo > ~/t/tmp

 will show how the client will never (and I mean never ;-) ) see
 the updated file.

 The problem is that we do not update nfsi->cache_change_attribute when the
 file changes on the server (we only update it when our client makes the
 changes). This again means that functions like nfs_check_verifier() will
 fail to register when the parent directory has changed and should trigger
 a dentry lookup revalidation.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Make sure cache_change_attribute is initialized to jiffies
 so when the mtime changes on directory, the directory
 will be refreshed.

 Signed-off by: Steve Dickson <steved@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

the request queue. Also periodically wakeup response_q so threads can
check if stuck requests have timed out. Workaround Windows server illegal smb
length on transact2 findfirst response.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

disabled.  Also set mode, uid, gid better on mkdir and create for the
case when Unix Extensions is not enabled and setuids is enabled. This is
necessary to fix the hole in which chown could be allowed for non-root
users in some cases if root mounted, and also to display the mode and uid
properly in some cases.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Access to a journaled HFS+ volume is not officially supported under Linux, so
mount such a volume read-only, but users can override this behaviour using the
"force" mount option.

The minimum requirement to relax this check is to at least check that the
journal is empty and so nothing needs to be replayed to make sure the volume
is consistent.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If an external device is used for a journal, by default it will use the
entire device.  The reiserfs journal code allocates structures per journal
block when it mounts the file system.  If the journal device is too large,
and memory cannot be allocated for the structures, it will continue and
ultimately panic when it can't pull one off the free list.

This patch handles the allocation failure gracefully and prints an error
message at mount time.

Changes: Updated error message to be more descriptive to the user.

Discussed and approved on ReiserFS Mailing List, Nov 28.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This logic was duplicated four times, for no good reason.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

JFFS2 initialize f->sem mutex as "locked" in the slab constructor which is a
bug. Objects are freed with unlocked f->sem mutex. So, when they allocated
again, f->sem is unlocked because the slab cache constructor is not called for
them. The constructor is called only once when memory pages are allocated for
objects (namely, when the slab layer allocates new slabs). So, sometimes
'struct jffs2_inode_info' are allocated with unlocked f->sem, sometimes with
locked. This is a bug. Instead, initialize f->sem as unlocked in the
constructor. I.e., in the "constructed" state f->sem must be unlocked.

From: Keijiro Yano <keijiro_yano@yahoo.co.jp>
Acked-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Check for invalid node ID values in the new atomic create+open method.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Check the created directory inode for aliases in the mkdir() method.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>