Looks like

commit eddfcbcd
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Mon Jun 15 12:33:53 2015 +0200
    drm/i915: Update less state during modeset.

introduced the unconditional calling of disable_shared_dpll, but didn't
fix up pre-gen5 to avoid the BUG_ON at the top of the function.

So change the BUG_ON into a gen check (alternately we could move the
BUG_ON until later, since we shouldn't have a pll struct here either,
but this seems clearer to read).

This fixes a crash on load on my x200s platform.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

First, an introduction. We currently have two types of GTT mmaps: the
"normal" old mmap, and the WC mmap. For frontbuffer-related features
that have automatic hardware tracking, only the non-WC mmap writes are
detected by the hardware. Since inside the Kernel both are treated as
ORIGIN_GTT, any features ignoring ORIGIN_GTT because of the hardware
tracking are destined to fail.

One of the special rules defined for the WC mmaps is that the user
should call the dirtyfb IOCTL after he is done using the pointers, so
that results in an intel_fb_obj_flush() call. The problem is that the
dirtyfb is passing ORIGIN_GTT, so it is being ignored by FBC - even
though the hardware tracking is not detecing the WC mmap operations.
So in order to fix that without having to give up the automatic
hardware tracking for GTT mmaps we transform the flush operation from
dirtyfb into a special operation: ORIGIN_DIRTYFB.

This commit fixes all the kms_frontbuffer_tracking subtests that
contain "fbc" and "mmap-wc" in their names and are currently failing
(for a total of 16 subtests).
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use the appropriate call.

I know there's a discussion about whether we need this call here at
all, but removing the call means we'll only update FBC after we get
the page flip IRQ. So the user may only see the new frame a little
after it should. Let's wait just a little bit more before removing
this call since we can rely in the HW tracking for accurate flips.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because intel_unpin_work_fn() already calls
intel_frontbuffer_flip_complete() which will call intel_fbc_flush()
which will call intel_fbc_update() when needed.

We couldn't fix this previously due to the fact that FBC was not
properly behaving as intended on frontbuffer flushes, but now that
this is fixed, we can remove the additional call.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fastboot should only downgrade a modeset if we have a match, not be
used to upgrade to a full modeset. Otherwise we can only use it in a
very restricted way: Initial modeset when the request mode is the
preferred one of the panel and there's still a pfit active. And that
only works because our mode_from_pipe_config fills in the wrong mode
(it takes the adjusted mode, not the requested one).

But we want fast modesets everywhere even after boot-up (especially
for testing, but not only there). Hence we need to be able to make any
modeset a fast one, which means we need to invert the logic and
optionally downgrade a modeset.

Note that this needs ->connector_changed split out from ->mode_changed
otherwise it's not going to work (because we might loose a modeset
because connectors changed but otherwise the config matches). As soon
as that's merged we can drop the i915.fastboot check from this code.

Also make sure that we don't accidentally clear any_ms and that we add
the planes for any kind of modeset.

Finally rename fastboot to fastset (yeah it's a silly name) since this
really isn't about booting all that much.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we both set mode->private_flags to some value and also use
the pipe_config quirk. But since the pipe_config quirk isn't tied to
the lifetime of the mode object we need to check both.

Simplify this by only using mode.private_flags and stop using the
INHERITED_MODE quirk. Also for clarity add an explicit #define for
that driver priavete mode flag.

By using crtc_state->mode_changed we can also remove the recalc local
variable.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we recompute the pipe config for all CRTCs that have changed
we don't have problems with stale configuration data for the global
pfit and can remove this hack. Yay!

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This can only fail because of a bug in the code.
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in follow-up to also remove start_vbl_count from
intel_crtc->atomic and put it into the intel_crtc directly - it's not
precomputed state.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We needed this originally for updating pagetables in plane commit
functions. But that's extracted into prepare/cleanup now. The other
issue was running updates when the pipe was off. That's also now
fixed.
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that there's only a single path for all atomic updates we can call
intel_(pre/post)_plane_update from intel_atomic_commit directly. This
makes the intention more clear.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Huzzah! \o/
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This fixes the breakage caused by

commit eddfcbcd
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Mon Jun 15 12:33:53 2015 +0200

    drm/i915: Update less state during modeset.

    No need to repeatedly call update_watermarks, or update_fbc.
    Down to a single call to update_watermarks in .crtc_enable
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
    Tested-by(IVB): Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add missing shared dpll disable to the noatomic disable function.

This function will be replaced by its atomic counterpart soon.

Changes since v1:
- intel_crtc->active and watermarks are fixed by a patch from
  Patrik Jakobsson
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fill in driver type, hsync, vrefresh and name.
Those members are not read out but can be calculated from the mode.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Calculate all state using a normal transition, but afterwards fudge
crtc->state->active back to its old value. This should still allow
state restore in setup_hw_state to work properly.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And get rid of things that are no longer true. This function is only
used for forcing a modeset when encoder properties are changed.

Because this is not yet done atomically, assume a full modeset is
needed and force a modeset on the crtc.

Changes since v1:
- s/reset/force modeset/
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This allows us to get rid of the set_init_power in
modeset_update_crtc_domains. The state should be sanitized enough
after setup_hw_state to not need the init power.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The previous commit converted hw readout to atomic, all the new_*
members were used for restoring the old state, but with the
conversion of suspend to atomic there's no use left for them.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of all the ad-hoc updating, duplicate the old state first
before reading out the hw state, then restore it.

intel_display_resume is a new function that duplicates the sw state,
then reads out the hw state, and commits the old state.

intel_display_setup_hw_state now only reads out the atomic state.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90396Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Readout initial hw mode, v2.

Atomic requires a mode blob when crtc_state->enable is true, or
you get a huge warn_on.

With a few tweaks the mode we read out from hardware could be used
as the real mode without a modeset, but this requires too much
testing, so for now force a modeset the first time the mode blob's
updated.

This preserves the old behavior, because previously we never set
the initial mode, which always meant that a modeset happened
when the mode was first set.

Changes since v1:
- Add a description in intel_modeset_readout_hw_state of how the
  recalculation is done.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is required to properly initialize vblanks on the active crtc.
Without it drm_calc_vbltimestamp_from_scanoutpos can fail with
crtc 0: Noop due to uninitialized mode.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There is a WARN_ON in drm_atomic_crtc_check for this when exposing the atomic property.
If the mode_blob still exists, but enable = false then all updates are rejected with -EINVAL.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Unreference the old mode_blob by calling the crtc_destroy_state
helper before zeroing the crtc_state.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All non-primary planes get disabled during hw readout,
this reduces complexity and means not having to do some plane
visibility checks during the first commit.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Nothing depends on this outside initial hw readout, so keep this
struct on the stack instead.

Changes since v1:
- Remove unrelated changes.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The src and crtc rectangles were never set, resulting in the primary
plane being made invisible on first atomic update.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of doing ad-hoc checks we already have a way of checking
if the state is compatible or not. Use this to force a modeset.

Only during modesets, or with PIPE_CONFIG_QUIRK_INHERITED_MODE
we should check if a full modeset is really needed.

Fastboot will allow the adjust parameter to ignore some stuff
too, and it will fix up differences in state that are ignored
by the compare function.

Changes since v1:
- Increase the value of the lowest m/n to prevent truncation.
- Dump pipe config when fastboot's used, without a modeset.
- Add adjust parameter to intel_compare_link_m_n, which is
  used to adjust m2_n2 if it's a multiple of m_n.
- Add exact parameter intel_compare_m_n.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There's not much point for calculating the changes for the old
state. Instead just disable all scalers when disabling. It's
probably good enough to just disable the crtc_scaler, but just in
case there's a bug disable all scalers.

This means intel_atomic_setup_scalers is only called in the crtc
check function now, so all the transitional code can be removed.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is probably hard to hit right now because in most cases all
atomic locks are taken, but after conversion to atomic this will make
it more likely to corrupt the crtc->config pointer, resulting in hard
to find bugs.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When resuming with dpms off, the following warn can happen:

[  118.334082] ------------[ cut here ]------------
[  118.334105] WARNING: CPU: 2 PID: 2274 at drivers/gpu/drm/i915/intel_display.c:6319 __intel_set_mode+0xae5/0xb90 [i915]()
[  118.334106] WARN_ON(!crtc->state->enable)
[  118.334137] Modules linked in: i915
[  118.334139] CPU: 2 PID: 2274 Comm: kworker/u16:117 Not tainted 4.2.0-rc2-fixes+ #4148
[  118.334140] Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014
[  118.334144] Workqueue: events_unbound async_run_entry_fn
[  118.334147]  ffffffffc017eef0 ffff8800ada93998 ffffffff817aa62a 0000000080000001
[  118.334149]  ffff8800ada939e8 ffff8800ada939d8 ffffffff810807e1 ffff8800ada939c8
[  118.334151]  ffff8800cea3b3d8 0000000000000000 ffff8800ad86b008 ffff880117705668
[  118.334151] Call Trace:
[  118.334155]  [<ffffffff817aa62a>] dump_stack+0x4f/0x7b
[  118.334157]  [<ffffffff810807e1>] warn_slowpath_common+0x81/0xc0
[  118.334158]  [<ffffffff81080861>] warn_slowpath_fmt+0x41/0x50
[  118.334173]  [<ffffffffc0120375>] __intel_set_mode+0xae5/0xb90 [i915]
[  118.334188]  [<ffffffffc0121312>] ? intel_modeset_compute_config+0x52/0xb40 [i915]
[  118.334191]  [<ffffffff8144de53>] ? drm_atomic_set_fb_for_plane+0x63/0x80
[  118.334205]  [<ffffffffc01269d9>] intel_set_mode+0x29/0x60 [i915]
[  118.334219]  [<ffffffffc012730a>] intel_crtc_restore_mode+0x13a/0x1f0 [i915]
[  118.334232]  [<ffffffffc0101160>] ? gen6_write16+0x250/0x250 [i915]
[  118.334246]  [<ffffffffc01283ec>] intel_modeset_setup_hw_state+0x89c/0xcd0 [i915]
[  118.334248]  [<ffffffff8137d260>] ? pci_pm_thaw+0x90/0x90
[  118.334255]  [<ffffffffc00ac11b>] i915_drm_resume+0xcb/0x160 [i915]
[  118.334262]  [<ffffffffc00ac1d2>] i915_pm_resume+0x22/0x30 [i915]
[  118.334263]  [<ffffffff8137d2c3>] pci_pm_resume+0x63/0xa0
[  118.334266]  [<ffffffff81467550>] dpm_run_callback+0x70/0x420
[  118.334267]  [<ffffffff81467cbd>] device_resume+0x9d/0x1c0
[  118.334269]  [<ffffffff814673d0>] ? initcall_debug_start+0x60/0x60
[  118.334270]  [<ffffffff81467dfc>] async_resume+0x1c/0x50
[  118.334271]  [<ffffffff810a6a94>] async_run_entry_fn+0x34/0xd0
[  118.334273]  [<ffffffff8109d4ad>] process_one_work+0x1dd/0x7e0
[  118.334275]  [<ffffffff8109d41a>] ? process_one_work+0x14a/0x7e0
[  118.334276]  [<ffffffff8109daf9>] worker_thread+0x49/0x450
[  118.334278]  [<ffffffff8109dab0>] ? process_one_work+0x7e0/0x7e0
[  118.334280]  [<ffffffff810a3cb9>] kthread+0xf9/0x110
[  118.334282]  [<ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90
[  118.334284]  [<ffffffff817b414f>] ret_from_fork+0x3f/0x70
[  118.334286]  [<ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90
[  118.334287] ---[ end trace 01f2cf6371b82d7a ]---

This warn is harmless, and can be fixed by not calling intel_crtc_disable when
the crtc is already disabled.
Reported-and-Tested-by: NJörg Otte <jrg.otte@gmail.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On Sun, Jul 12, 2015 at 09:52:51AM -0700, Linus Torvalds wrote:
> On Sun, Jul 12, 2015 at 1:03 AM, Jörg Otte <jrg.otte@gmail.com> wrote:
> > BUG: unable to handle kernel NULL pointer dereference at 0000000000000009
> > IP: [<ffffffffbd3447bb>] 0xffffffffbd3447bb
>
> Ugh. Please enable KALLSYMS to get sane symbols.
>
> But yes, "crtc_state->base.active" is at offset 9 from "crtc_state",
> so it's pretty clearly just that change frm
>
> -       if (intel_crtc->active) {
> +       if (crtc_state->base.active) {
>
> and "crtc_state" is NULL.
>
> And the code very much knows that crtc_state can be NULL, since it's
> initialized with
>
>         crtc_state = state->base.state ?
>                 intel_atomic_get_crtc_state(state->base.state,
> intel_crtc) : NULL;
>
> Tssk. Daniel? Should I just revert that commit dec4f799
> ("drm/i915: Use crtc_state->active in primary check_plane func") for
> now, or is there a better fix? Like just checking crtc_state for NULL?

Indeed embarrassing. I've missed that we still have 1 caller left that's
using the transitional helpers, and those don't fill out
plane_state->state backpointers to the global atomic update since there is
no global atomic update for transitional helpers. Below diff should fix
this - we need to preferentially check crts_state->active and if that's
not set intel_crtc->active should yield the right result for the one
remaining caller (it's in the crtc_disable paths).

This fixes a regression introduced in

commit dec4f799
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Jul 7 11:15:47 2015 +0200

    drm/i915: Use crtc_state->active in primary check_plane func

which was quickly reverted in

commit 01e2d062
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Sun Jul 12 15:00:20 2015 -0700

    Revert "drm/i915: Use crtc_state->active in primary check_plane func"

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jörg Otte <jrg.otte@gmail.com>
Reported-and-tested-by: NJörg Otte <jrg.otte@gmail.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Watermark calculations depend on the intel_crtc->active flag to be set
properly. Suspend/resume is broken on SKL and we also get DDB mismatches
without this patch.

The regression was introduced in:

commit eddfcbcd
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Mon Jun 15 12:33:53 2015 +0200

    drm/i915: Update less state during modeset.

    No need to repeatedly call update_watermarks, or update_fbc.
    Down to a single call to update_watermarks in .crtc_enable
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
    Tested-by(IVB): Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Don't touch disable_shared_dpll()
Signed-off-by: NPatrik Jakobsson <patrik.jakobsson@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91203Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Drop the spurious 'A' from the VLV/CHV ref clock enable define,
and add the "REF" to the VLV ref clock selection bit. Also
s/CLOCK/CLK/ for extra consistency.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We disable the DPLL VGA mode when enabling the DPLL, but we enaable it
again when disabling the DPLL. Having VGA mode enabled even in unused
DPLLs can cause problems for CHV, so it seems wiser to always keep it
disabled. And let's just do that on all GMCH platforms to keep things
as similar as possible between them.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit dec4f799.

Jörg Otte reports a NULL pointder dereference due to this commit, as
'crtc_state' very much can be NULL:

        crtc_state = state->base.state ?
                intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;

So the change to test 'crtc_state->base.active' cannot possibly be
correct as-is.

There may be some other minimal fix (like just checking crtc_state for
NULL), but I'm just reverting it now for the rc2 release, and people
like Daniel Vetter who actually know this code will figure out what the
right solution is in the longer term.
Reported-and-bisected-by: NJörg Otte <jrg.otte@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let's do a frontbuffer flush on dirty fb.
To be used for DIRTYFB drm ioctl.

This patch solves the biggest PSR known issue, that is
missed screen updates during boot, mainly when there is a splash
screen involved like Plymouth.

Previously PSR was being invalidated by fbdev and Plymounth
was taking control with PSR yet invalidated and could get screen
updates normally. However with some atomic modeset changes
Pymouth modeset over ioctl was now causing frontbuffer flushes
making PSR gets back to work while it cannot track the
screen updates and exit properly.

By adding this flush on dirtyfb we properly track frontbuffer
writes and properly exit PSR.

Actually all mmap_wc users should call this dirty callback
in order to have a proper frontbuffer tracking.

In the future it can be extended to return 0 if the whole
screen has being flushed or the number of rects flushed
as Chris suggested.

v2: Remove ORIGIN_FB_DIRTY and use ORIGIN_GTT instead since dirty
    callback is just called after few screen updates and not on
    everyone as pointed by Daniel.

v3: Use flush instead of invalidate since flush means
    invalidate + flush and dirty means drawn had finished and
    it can be flushed.

v4: Remove PSR from subject since it is purely frontbuffer tracking
    change and that can be useful for FBC as well.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Fix alignment as spotted by Paulo.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since

commit 8c7b5ccb
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Tue Apr 21 17:13:19 2015 +0300

    drm/i915: Use atomic helpers for computing changed flags

we compute the plane state for a modeset before actually committing
any changes, which means crtc->active won't be correct yet. Looking at
future work in the modeset conversion targetting 4.3 the only places
where crtc_state->active isn't accurate is when disabling other CRTCs
than the one the modeset is for (when stealing connectors). Which
isn't the case here. And that's also confirmed by an audit, we do
unconditionally update crtc_state->active for the current pipe.

We also don't need to update any other plane check functions since we
only ever add the primary state to the modeset update right now.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was lost in

commit ce22dba9
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Tue Apr 21 17:12:56 2015 +0300

    drm/i915: Move toggling planes out of crtc enable/disable.

and we still need that crtc->active check since the overall modeset
flow doesn't yet take dpms state into account properly. Fixes WARNING
backtraces on at least bdw/hsw due to the ips disabling code being
upset about being run on a switched-off pipe.

We don't need a corresponding change on the enable side since with the
old setCrtc semantics we always force-enable the pipe after a modeset.
And the dpms function intel_crtc_control already checks for ->active.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because the cool kids use dev_priv and FBC wants to be cool too.

We've been historically using struct drm_device on the FBC function
arguments, but we only really need it for intel_vgpu_active(): we can
use dev_priv everywhere else. So let's fully switch to dev_priv since
I'm getting tired of adding "struct drm_device *dev = dev_priv->dev"
everywhere.

If I get a NACK here I'll propose the opposite: convert all the
functions that currently take dev_priv to take dev.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because it makes more sense there, IMHO.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After the register save/restore code is gone there's just one user
left and it just obfuscates that one. Remove it.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>