This patch adds an unusual_devs entry for the Minolta Dimage Z10.
Originally reported by Vilisas <vilisas@xxx.lt>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[ftdi_sio] Replaced redundant INTERFACE_A and INTERFACE_B macros with
the equivalent PIT_SIOA and PIT_SIOB macros.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some VID/PID updates for the ftdi_sio driver:

* The "Gude Analog- und Digitalsysteme GmbH" entries were missing from
  the "combined" table.
* Replaced FTDI_8U232AM_ALT_ALT_PID with 3 PIDs for devices from
  4n-galaxy.de.
* Removed redundant FTDI_RM_VID and renamed FTDI_RMCANVIEW_PID to
  FTDI_RM_CANVIEW_PID.
* Added VID/PID for serial converter in Mobility Electronics EasiDock
  USB 200 (mentioned by Gregory Schmitt).
* Added PID for Active Robots USB comms board (mentioned by John Koch).
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c

On Thu, Apr 14, 2005 at 11:06:21PM +0400, Sergey Vlasov wrote:
> http://thread.gmane.org/gmane.linux.usb.devel/32977
>
> (see "[PATCH] N/3 cdc acm errors").
>
> You also need this driver core fix:
>
> http://thread.gmane.org/gmane.linux.usb.devel/33132

I reproduced the same oops while trying to execute at+mode=99, it would
be nice to get these fix merged since I believe it's still needed to
connect the laptop over gprs (something I didn't test yet).

This further patch will allow you to connect via usbnet, Greg could you
apply? Thanks!
Signed-off-by: NAndrea Arcangeli <andrea@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Easier than trying to use the generic usb-serial driver.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Miscellaneous updates for EHCI.

 - Mostly updates the power switching on EHCI controllers.  One routine
   centralizes the "power on/off all ports" logic, and the capability to
   do that is reported more correctly.

 - Courtesy Colin Leroy, a patch to always power up ports after resumes
   which didn't keep a USB device suspended.  The reset-everything logic
   powers down those ports (on some hardware) so something needs to turn
   them back on.

 - Minor tweaks/bugfixes for the debug port support.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes a compiler error caused by a missing prototype.  It should
apply directly to Greg KH's usb-2.6.git tree.
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

size_t is zu, ssize_t is zd...
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

when stealing code from ati_remote for a GPL-driver of my usbradio (because of
its neat usb int transfers) I found out, that the inbuf is freed twice.

I don't have the ati-remote, so I don't know it is a problem at all, but it
looks strange to me anyway. Also I don't know if it has been fixed already in
newer kernel versions.


From: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a somewhat more comprehensive fix for the problem of devices
like the newer Zaurii ... or in this case some Motorola cell phones.

To recap, the problem's root cause is that these devices aren't using
standard USB class specifications for their network links, and so far
we've had to add lots of device-specific driver entries.  The vendor
fix abuses the CDC MDLM descriptors (they _could_ have conformed to
the spec, but didn't) and defines a "Belcarra firmware" pseudo-class.

This patch recognizes that pseudo-class by the GUIDs in those descriptors,
and handles the devices that just use the Zaurus framing.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Modify the ASIX USB Ethernet code to make use of the new status
infrastructure in usbnet.

Additionally, add a link_reset() handler to the struct usbnet
structure to provide a generic means for a driver to perform link
reset tasks such as a determining link speed and setting
device flags accordingly.
Signed-off-by: NDavid Hollis <dhollis@davehollis.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The patch below adjusts the MODALIAS generated by the usb hotplug
function to match the proposed change to scripts/mod/file2alias.c.
Signed-off-by: NRoman Kagan <rkagan@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes some needlessly global code static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes needlessly global code static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes two needlessly global functions static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes a needlessly global function static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix compiler warnings, and remove unneeded #includes
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Phil Dibowitz wrote:
> 1. You're adding product IDs 1202, 1203, 1204, and 1205. 1203 was
> already there, but you remove it, OK, but 1205 is already there, so
> you'll need to fix that.

I was not removing 1203, it's just the extension of the bcd range. You are 
right about 1205, as I wrote, it was a patch against 2.6.11.7. Attached is 
a patch against 2.6.12-rc2.

> 2. I'm OK with the full bcd range if Apple is changing it on firmware
> revs... fine, but it's bcd, not hex... 0x9999 =)

I just copied from other entries. There're a lot 0xffffs in unusual_dev.h, 
so I assumed it is correct. I changed it to 0x9999.

> 3. It's rather obnoxious to take the original submitter's credit away.

I didn't remove it, I changed it to "based on...". Because I changed 
something (the range) in his entry, I thought it is the best to take the 
responsibility but keep the origin. Anyway, in the new patch I did it in a 
different way.

> 4. Your /proc/bus/usb/devices shows 1204, but I see no evidence 1202 is
> really an iPod.

I don't have an old iPod mini, but you find a lot of evidence here:

http://www.google.com/search?q=0x1202+ipod

Especially this one:

http://www.qbik.ch/usb/devices/showdescr.php?id=2737

> It also looks like 1205's entry is getting mangled, but I haven't
> attempted to apply the patch, so I'm not sure.

No, the patch was ok, but I agree it looks strange. It's not very 
readable, because I cannot tell diff to work blockwise instead of 
linewise. Because of the similarity of the entries, diff splits and merges 
them. Anyway, the new patch "looks" better. ;-)
Signed-off-by: NSven Anderson <sven-linux@anderson.de>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

maybe typo?
Signed-off-by: NHideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

kobject_add() and kobject_del() don't emit hotplug events anymore.
We need to do it ourselves now.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB: fix AIPTEK input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)

PROBLEM: aiptek input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)
REASON: `dev` - field not filled...
SOLUTION: in linux/drivers/usb/input/aiptek.c write
	aiptek->inputdev.dev = &intf->dev;
before calling
	input_register_device(&aiptek->inputdev);

From: "Viktor A. Danilov" <__die@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/input/aiptek.c
===================================================================

Updates to the Ethernet/RNDIS gadget driver (mostly for RNDIS):

  - Fix brown-paper bag goof with RNDIS packet TX ... the wrong length
    field got set, so Windows would ignore data packets it received.

  - More consistent handling of CDC output filters (but not yet hooking
    things up so RNDIS uses the mechanism).

  - Zerocopy RX for RNDIS packets too (saving CPU cycles).

  - Use the pre-allocated interrupt/status request and buffer, rather
    than allocating and freeing one of each every few seconds (which
    could fail).

  - Some more "sparse" tweaks, making both dual-speed and single-speed
    configurations happier.

  - RNDIS speeds are reported in units of 100bps, not bps.

Plus two minor cleanups (whitespace, messaging).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*,
there's no need to check a pointer for NULL before calling kfree() on it.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/class/audio.c
===================================================================

Checking for NULL before calling kfree() is redundant. This patch removes
these redundant checks and also makes a few tiny whitespace changes.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Please accept the attached patch which adds the vendorid 0x0745 and
modelid 0x0001 (ID 0745:0001) "Syntech Information Co., Ltd."

The device is an USB IR cradle for a barcode scanner (CPT-8001C) from
Cipherlab.


From: Peter Favrholdt <pfavr@mip.sdu.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -u kernel-source-2.6.11/drivers/usb/serial/pl2303.c ../kernel-source-2.6.11/drivers/usb/serial/pl2303.c

I'm attaching a patch to fix status when using Siemens X65
mobile. This mobile use first byte instead of normal UART_STATE
byte.


From: Flavio Leitner <fbl@conectiva.com.br>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/serial/pl2303.c
===================================================================

It's possible to unplug usb device and do tiocmset() and tiocmget() without
valid interface in pl2303 module.

The patch below check this and return -ENODEV if interface was removed.

From: Flavio Leitner <fbl@conectiva.com.br>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -purN linux-05-04-11/drivers/usb/serial/pl2303.c linux-05-04-11.usb/drivers/usb/serial/pl2303.c

In response to complaints about excessive latency in the uhci-hcd driver
I'm planning to convert it to a top-half/bottom-half design.  It turns out
that to do this, the USB API has to be modified slightly since the driver
will not be able to meet one of the guarantees in the current API.  This
patch changes some kerneldoc, specifying the weaker guarantee.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds a quirk to the OHCI driver that lets it work with an old
Compaq implementation.  It also removes some needless strings from
the non-debug version of the driver.
Signed-off-by: NChris Clayton <chris_clayton@f1internet.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Hmm, another case of a Zaurus ROM not telling the expected conformance lie;
this patch handles the lies told by the SL5600.

From: bender647@gmail.com
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

the attached patch adds another USB device ID to the list. Seems the
device is known under multiple IDs.
Signed-off-by: NThomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/storage/unusual_devs.h
===================================================================

This patch changes the delay for the US_FL_GO_SLOW patch from 110us to 125.
Some delays need this extra delay includign Jan De Luyck's drive which spawned
the original increase from 110 to 110us. 125 is a microframe, so this delay
seems to make sense more than just be a random delay (thanks to David Brownell
for pointing that out after my original patch).
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/storage/transport.c
===================================================================

On ppc64:

drivers/usb/net/usbnet.c: In function `skb_return':
drivers/usb/net/usbnet.c:429: warning: int format, different type arg (arg 3)
drivers/usb/net/usbnet.c:429: warning: int format, different type arg (arg 3)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/usb/net/usbnet.c~usbnet-printk-warning-fix drivers/usb/net/usbnet.c

I am sorry that the last patch about 32 bit compat ioctl on
64 bit kernel actually breaks the usbdevfs. That is on the current
BK tree. I am retarded. 

Here is the patch to fix it. Tested with USB hard disk and webcam
in both 32bit compatible mode and native 64bit mode.

Again, sorry about that.


From: Christopher Li <chrisl@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts a recent change to usb_set_interface().  The change worked
around a quirk in certain devices, but doing this in usbcore creates
needless regressions for other devices.  More appropriate fixes won't
put such handling in usbcore.

Basically it's tricky to do a full software reset of USB device state, since
the devices don't all act the same.  This adds a note to the kerneldoc for
the usb_reset_configuration() call to highlight the quirk this was working
around:  endpoint data toggles not being reset.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>