The EDAC subsystem uses the old struct sysdev approach,
creating all nodes using the raw sysfs API. This is bad,
as the API is deprecated.

As we'll be changing the EDAC API, let's first port the existing
code to struct device.

There's one drawback on this patch: driver-specific sysfs
nodes, used by mpc85xx_edac, amd64_edac and i7core_edac
 won't be created anymore. While it would be possible to
also port the device-specific code, that would mix kobj with
struct device, with is not recommended. Also, it is easier and nicer
to move the code to the drivers, instead, as the core can get rid
of some complex logic that just emulates what the device_add()
and device_create_file() already does.

The next patches will convert the driver-specific code to use
the device-specific calls. Then, the remaining bits of the old
sysfs API will be removed.

NOTE: a per-MC bus is required, otherwise devices with more than
one memory controller will hit a bug like the one below:

[  819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev()
[  819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1
[  819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1
[  819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0
[  819.094984] ------------[ cut here ]------------
[  819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0()
[  819.107282] Hardware name: S2600CP
[  819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0'
[  819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan]
[  819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1
[  819.184113] Call Trace:
[  819.186868]  [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0
[  819.193573]  [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50
[  819.200000]  [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0
[  819.206025]  [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220
[  819.212944]  [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20
[  819.219656]  [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20
[  819.226109]  [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0
[  819.232350]  [<ffffffff813ae7cb>] device_add+0x2db/0x460
[  819.238300]  [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core]
[  819.246460]  [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core]
[  819.255215]  [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core]
[  819.262611]  [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac]
[  819.270493]  [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac]
[  819.277630]  [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90
[  819.284268]  [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0
[  819.290508]  [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100
[  819.297117]  [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60
[  819.303457]  [<ffffffff813b1003>] really_probe+0x73/0x270
[  819.309496]  [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0
[  819.316104]  [<ffffffff813b149b>] __driver_attach+0xab/0xb0
[  819.322337]  [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0
[  819.329151]  [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90
[  819.335489]  [<ffffffff813b0d7e>] driver_attach+0x1e/0x20
[  819.341534]  [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0
[  819.347884]  [<ffffffffa0347000>] ? 0xffffffffa0346fff
[  819.353641]  [<ffffffff813b19f6>] driver_register+0x76/0x140
[  819.359980]  [<ffffffff8159f18b>] ? printk+0x51/0x53
[  819.365524]  [<ffffffffa0347000>] ? 0xffffffffa0346fff
[  819.371291]  [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0
[  819.378096]  [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac]
[  819.385231]  [<ffffffff8100203f>] do_one_initcall+0x3f/0x170
[  819.391577]  [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230
[  819.397926]  [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b
[  819.404633] ---[ end trace 1654fdd39556689f ]---

This happens because the bus is not being properly initialized.
Instead of putting the memory sub-devices inside the memory controller,
it is putting everything under the same directory:

$ tree /sys/bus/edac/
/sys/bus/edac/
├── devices
│   ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts
│   ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0
│   ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1
│   ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2
│   ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0
│   ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1
│   ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3
│   ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6
│   ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch
│   ├── mc -> ../../../devices/system/edac/mc
│   └── mc0 -> ../../../devices/system/edac/mc/mc0
├── drivers
├── drivers_autoprobe
├── drivers_probe
└── uevent

On a multi-memory controller system, the names "csrow%d" and "dimm%d"
should be under "mc%d", and not at the main hierarchy level.

So, we need to create a per-MC bus, in order to have its own namespace.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Greg K H <gregkh@linuxfoundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The edac_align_ptr() function is used to prepare data for a single
memory allocation kzalloc() call. It counts how many bytes are needed
by some data structure.

Using it as-is is not that trivial, as the quantity of memory elements
reserved is not there, but, instead, it is on a next call.

In order to avoid mistakes when using it, move the number of allocated
elements into it, making easier to use it.
Reviewed-by: NBorislav Petkov <bp@amd64.org>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.

Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move toplevel sysfs class to the stub and make it available to
non-modularized code too. Add proper refcounting of its users and move
the registration functionality into the reference counting routines.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Collection of patches, merged into one, from Adrian that do the following:

1) This patch makes the following needlessly global functions static:
- edac_pci_get_log_pe()
- edac_pci_get_log_npe()
- edac_pci_get_panic_on_pe()
- edac_pci_unregister_sysfs_instance_kobj()
- edac_pci_main_kobj_setup()

2) Remove unneeded function edac_device_find()

3) Added #if 0 around function  edac_pci_find()

4) make the needlessly global edac_pci_generic_check() static

5) Removed function edac_check_mc_devices()

Doug Thompson modified Adrian's patches, to bettern represent
the direction of EDAC, and make them one patch.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes sysfs exit code for the EDAC PCI device in a similiar manner
and the previous fixes for EDAC_MC and EDAC_DEVICE.

It removes the old (and incorrect) completion model and uses reference counts
on per instance kobjects and on the edac core module.

This pattern was applied to the edac_mc and edac_device code, but the EDAC PCI
code was missed.  In addition, this fixes a system hang after a low level
driver was unloaded.  (A cleanup function was called twice, which really
screwed things up)

Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a deadlock that could occur on a 'setup' and 'teardown' sequence of
the workq for a edac_mc control structure instance.  A similiar fix was
previously implemented for the edac_device code.

In addition, the edac_mc device code there was missing code to allow the workq
period valu to be altered via sysfs control.

This patch adds that fix on the code, and allows for the changing of the
period value as well.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With feedback, this patch corrects operation of the kobject release operation
on kobjects, attributes and controls for the edac_device.

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Acked-by: NGreg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch refactors the 'releasing' of kobjects for the edac_mc type of
device.  The correct pattern of kobject release is followed.

As internal kobjs are allocated they bump a ref count on the top level kobj.
It in turn has a module ref count on the edac_core module.  When internal
kobjects are released, they dec the ref count on the top level kobj.  When the
top level kobj reaches zero, it decrements the ref count on the edac_core
object, allow it to be unloaded, as all resources have all now been released.

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Acked-by: NGreg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Refactor the edac_align_ptr() function to reduce the noise of casting the
aligned pointer to the various types of data objects and modified its callers
to its new signature
Signed-off-by: NDouglas Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Run the EDAC CORE files through Lindent for cleanup
Signed-off-by: NDouglas Thompson <dougthompson@xmission.com>
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixup poll values for MC and PCI.
Also make mc function names unique to mc.
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NDouglas Thompson <dougthompson@xmissin.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the memory controller object to work queue based implementation from the
kernel thread based.
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NDouglas Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the new 'class' of object to be managed, named: 'edac_device'.

As a peer of the 'edac_mc' class of object, it provides a non-memory centric
view of an ERROR DETECTING device in hardware. It provides a sysfs interface
and an abstraction for varioius EDAC type devices.

Multiple 'instances' within the class are possible, with each 'instance'
able to have multiple 'blocks', and each 'block' having 'attributes'.

At the 'block' level there are the 'ce_count' and 'ue_count' fields
which the device driver can update and/or call edac_device_handle_XX()
functions. At each higher level are additional 'total' count fields,
which are a summation of counts below that level.

This 'edac_device' has been used to capture and present ECC errors
which are found in a a L1 and L2 system on a per CORE/CPU basis.
Signed-off-by: NDouglas Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a large patch to refactor the original EDAC module in the kernel
and to break it up into better file granularity, such that each source
file contains a given subsystem of the EDAC CORE.

Originally, the EDAC 'core' was contained in one source file: edac_mc.c
with it corresponding edac_mc.h file.

Now, there are the following files:

edac_module.c	The main module init/exit function and other overhead
edac_mc.c	Code handling the edac_mc class of object
edac_mc_sysfs.c	Code handling for sysfs presentation
edac_pci_sysfs.c  Code handling for PCI sysfs presentation
edac_core.h	CORE .h include file for 'edac_mc' and 'edac_device' drivers
edac_module.h	Internal CORE .h include file

This forms a foundation upon which a later patch can create the 'edac_device'
class of object code in a new file 'edac_device.c'.
Signed-off-by: NDouglas Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>