When CONFIG_USER_RETURN_NOTIFIER is set, we need to link
kernel/user-return-notifier.o.
Signed-off-by: NAvi Kivity <avi@redhat.com>
LKML-Reference: <1256473485-23109-1-git-send-email-avi@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a general per-cpu notifier that is called whenever the kernel is
about to return to userspace.  The notifier uses a thread_info flag
and existing checks, so there is no impact on user return or context
switch fast paths.

This will be used initially to speed up KVM task switching by lazily
updating MSRs.
Signed-off-by: NAvi Kivity <avi@redhat.com>
LKML-Reference: <1253342422-13811-1-git-send-email-avi@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Commit def0a9b2 (sched_clock: Make it NMI safe) assumed
cmpxchg() of 64bit values was available on X86_32.

That is not so - and causes some subtle scheduler misbehavior due
to incorrect timestamps off to up by ~4 seconds.

Two symptoms are known right now:

 - interactivity problems seen by Arjan: up to 600 msecs
   latencies instead of the expected 20-40 msecs. These
   latencies are very visible on the desktop.

 - incorrect CPU stats: occasionally too high percentages in 'top',
   and crazy CPU usage stats.
Reported-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090930170754.0886ff2e@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

git commit 75c5158f converted the clocksource spinlock to a
mutex. This causes the following BUG:

BUG: sleeping function called from invalid context at
kernel/mutex.c:280 in_atomic(): 0, irqs_disabled(): 1, pid: 2473,
name: pm-suspend 2 locks held by pm-suspend/2473:
 #0:  (&buffer->mutex){......}, at: [<ffffffff8115ab13>]
sysfs_write_file+0x3c/0x137
 #1:  (pm_mutex){......}, at: [<ffffffff810865b5>]
enter_state+0x39/0x130 Pid: 2473, comm: pm-suspend Not tainted 2.6.31
#1 Call Trace:
 [<ffffffff810792f0>] ? __debug_show_held_locks+0x22/0x24
 [<ffffffff8104a2ef>] __might_sleep+0x107/0x10b
 [<ffffffff8141fca9>] mutex_lock_nested+0x25/0x43
 [<ffffffff81073537>] clocksource_resume+0x1c/0x60
 [<ffffffff81072902>] timekeeping_resume+0x1e/0x1c8
 [<ffffffff812aee62>] __sysdev_resume+0x25/0xcf
 [<ffffffff812aef79>] sysdev_resume+0x6d/0xae
 [<ffffffff810864f8>] suspend_devices_and_enter+0x12b/0x1af
 [<ffffffff8108665b>] enter_state+0xdf/0x130
 [<ffffffff81085dc3>] state_store+0xb6/0xd3
 [<ffffffff81204c73>] kobj_attr_store+0x17/0x19
 [<ffffffff8115abd2>] sysfs_write_file+0xfb/0x137
 [<ffffffff811057d2>] vfs_write+0xae/0x10b
 [<ffffffff81208392>] ? __up_read+0x1a/0x7f
 [<ffffffff811058ef>] sys_write+0x4a/0x6e
 [<ffffffff81011b82>] system_call_fastpath+0x16/0x1b

clocksource_resume is called early in the resume process, there is
only one cpu, no processes are running and the interrupts are
disabled. It is therefore possible to resume the clocksources
without taking the clocksource mutex.
Reported-by: NXiaotian Feng <xtfeng@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: NMichal Schmidt <mschmidt@redhat.com>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Cc: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <20090924172952.49697825@mschwide.boeblingen.de.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The memory barrier semantics of futex_wait_queue_me() are
non-obvious. Add some commentary to try and clarify it.
Signed-off-by: NDarren Hart <dvhltc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Dinakar Guniguntala <dino@in.ibm.com>
Cc: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <20090924185447.694.38948.stgit@Aeon>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The general one handles NULL, the static obsolescent
(CONFIG_HAVE_LEGACY_PER_CPU_AREA) one in module.c doesn't; Eric's
commit 720eba31 assumed it did, and various frobbings since then kept
that assumption.

All other callers in module.c all protect it with an if; this effectively
does the same as free_init is only goto if we fail percpu_modalloc().
Reported-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Tested-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>

Normally the twisty paths of sysfs will free the attributes, but not if
we fail before we hook it into sysfs (which is the last thing we do in
load_module).

(This sysfs code is a turd, no doubt there are other issues lurking too).
Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>

Some boot mechanisms require that kernel parameters are stored in a
separate file which is loaded to memory without further processing
(e.g. the "Load from FTP" method on s390). When such a file contains
newline characters, the kernel parameter preceding the newline might
not be correctly parsed (due to the newline being stuck to the end of
the actual parameter value) which can lead to boot failures.

This patch improves kernel command line usability in such a situation
by allowing generic whitespace characters as separators between kernel
parameters.
Signed-off-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Also remove all parts of the string table (referenced by the symbol
table) that are not needed for kallsyms use (i.e. which were only
referenced by symbols discarded by the previous patch, or not
referenced at all for whatever reason).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Discard all symbols not interesting for kallsyms use: absolute,
section, and in the common case (!KALLSYMS_ALL) data ones.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Because the binfmt is not different between threads in the same process,
it can be moved from task_struct to mm_struct.  And binfmt moudle is
handled per mm_struct instead of task_struct.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

->ioctx_lock and ->ioctx_list are used only under CONFIG_AIO.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CLONE_PARENT was used to implement an older threading model.  For
consistency with the CLONE_THREAD check in copy_pid_ns(), disable
CLONE_PARENT with CLONE_NEWPID, at least until the required semantics of
pid namespaces are clear.
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When global or container-init processes use CLONE_PARENT, they create a
multi-rooted process tree.  Besides siblings of global init remain as
zombies on exit since they are not reaped by their parent (swapper).  So
prevent global and container-inits from creating siblings.
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's unused.

It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.

It _was_ used in two places at arch/frv for some reason.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__fatal_signal_pending inlines to one instruction on x86, probably two
instructions on other machines.  It takes two longer x86 instructions just
to call it and test its return value, not to mention the function itself.

On my random x86_64 config, this saved 70 bytes of text (59 of those being
__fatal_signal_pending itself).
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce do_send_sig_info() and convert group_send_sig_info(),
send_sig_info(), do_send_specific() to use this helper.

Hopefully it will have more users soon, it allows to specify
specific/group behaviour via "bool group" argument.

Shaves 80 bytes from .text.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce core pipe limiting sysctl.

Since we can dump cores to pipe, rather than directly to the filesystem,
we create a condition in which a user can create a very high load on the
system simply by running bad applications.

If the pipe reader specified in core_pattern is poorly written, we can
have lots of ourstandig resources and processes in the system.

This sysctl introduces an ability to limit that resource consumption.
core_pipe_limit defines how many in-flight dumps may be run in parallel,
dumps beyond this value are skipped and a note is made in the kernel log.
A special value of 0 in core_pipe_limit denotes unlimited core dumps may
be handled (this is the default value).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Reported-by: NEarl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes tracehook_notify_jctl() so it's called with the siglock held,
and changes its argument and return value definition.  These clean-ups
make it a better fit for what new tracing hooks need to check.

Tracing needs the siglock here, held from the time TASK_STOPPED was set,
to avoid potential SIGCONT races if it wants to allow any blocking in its
tracing hooks.

This also folds the finish_stop() function into its caller
do_signal_stop().  The function is short, called only once and only
unconditionally.  It aids readability to fold it in.

[oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state]
[oleg@redhat.com: introduce tracehook_finish_jctl() helper]
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current behaviour of sys_waitid() looks odd.  If user passes infop ==
NULL, sys_waitid() returns success.  When user additionally specifies flag
WNOWAIT, sys_waitid() returns -EFAULT on the same conditions.  When user
combines WNOWAIT with WCONTINUED, sys_waitid() again returns success.

This patch adds check for ->wo_info in wait_noreap_copyout().

User-visible change: starting from this commit, sys_waitid() always checks
infop != NULL and does not fail if it is NULL.
Signed-off-by: NVitaly Mayatskikh <v.mayatskih@gmail.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_wait() checks ->wo_info to figure out who is the caller.  If it's not
NULL the caller should be sys_waitid(), in that case do_wait() fixes up
the retval or zeros ->wo_info, depending on retval from underlying
function.

This is bug: user can pass ->wo_info == NULL and sys_waitid() will return
incorrect value.

man 2 waitid says:

	waitid(): returns 0 on success

Test-case:

	int main(void)
	{
		if (fork())
			assert(waitid(P_ALL, 0, NULL, WEXITED) == 0);

		return 0;
	}

Result:

	Assertion `waitid(P_ALL, 0, ((void *)0), 4) == 0' failed.

Move that code to sys_waitid().

User-visible change: sys_waitid() will return 0 on success, either
infop is set or not.

Note, there's another bug in wait_noreap_copyout() which affects
return value of sys_waitid(). It will be fixed in next patch.
Signed-off-by: NVitaly Mayatskikh <v.mayatskih@gmail.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kill the unused "parent" argument in wait_consider_task(), it was never used.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

task_pid_type() is only used by eligible_pid() which has to check wo_type
!= PIDTYPE_MAX anyway.  Remove this check from task_pid_type() and factor
out ->pids[type] access, this shrinks .text a bit and simplifies the code.

The matches the behaviour of other similar helpers, say get_task_pid().
The caller must ensure that pid_type is valid, not the callee.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

child_wait_callback()->eligible_child() is not right, we can miss the
wakeup if the task was detached before __wake_up_parent() and the caller
of do_wait() didn't use __WALL.

Move ->wo_pid checks from eligible_child() to the new helper,
eligible_pid(), and change child_wait_callback() to use it instead of
eligible_child().

Note: actually I think it would be better to fix the __WCLONE check in
eligible_child(), it doesn't look exactly right.  But it is not clear what
is the supposed behaviour, and any change is user-visible.
Reported-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suggested by Roland.

do_wait(__WNOTHREAD) can only succeed if the caller is either ptracer, or
it is ->real_parent and the child is not traced. IOW, caller == p->parent
otherwise we should not wake up.

Change child_wait_callback() to check this. Ratan reports the workload with
CPU load >99% caused by unnecessary wakeups, should be fixed by this patch.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ratan Nalumasu reported that in a process with many threads doing
unnecessary wakeups.  Every waiting thread in the process wakes up to loop
through the children and see that the only ones it cares about are still
not ready.

Now that we have struct wait_opts we can change do_wait/__wake_up_parent
to use filtered wakeups.

We can make child_wait_callback() more clever later, right now it only
checks eligible_child().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Acked-by: NJames Morris <jmorris@namei.org>
Tested-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_wait() wakeup optimization: shift security_task_wait() from eligible_child() to wait_consider_task()

Preparation, no functional changes.

eligible_child() has a single caller, wait_consider_task(). We can move
security_task_wait() out from eligible_child(), this allows us to use it
for filtered wake_up().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The bug is old, it wasn't cause by recent changes.

Test case:

	static void *tfunc(void *arg)
	{
		int pid = (long)arg;

		assert(ptrace(PTRACE_ATTACH, pid, NULL, NULL) == 0);
		kill(pid, SIGKILL);

		sleep(1);
		return NULL;
	}

	int main(void)
	{
		pthread_t th;
		long pid = fork();

		if (!pid)
			pause();

		signal(SIGCHLD, SIG_IGN);
		assert(pthread_create(&th, NULL, tfunc, (void*)pid) == 0);

		int r = waitpid(-1, NULL, __WNOTHREAD);
		printf("waitpid: %d %m\n", r);

		return 0;
	}

Before the patch this program hangs, after this patch waitpid() correctly
fails with errno == -ECHILD.

The problem is, __ptrace_detach() reaps the EXIT_ZOMBIE tracee if its
->real_parent is our sub-thread and we ignore SIGCHLD.  But in this case
we should wake up other threads which can sleep in do_wait().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Organize cgroups over soft limit in a RB-Tree

Introduce an RB-Tree for storing memory cgroups that are over their soft
limit.  The overall goal is to

1. Add a memory cgroup to the RB-Tree when the soft limit is exceeded.
   We are careful about updates, updates take place only after a particular
   time interval has passed
2. We remove the node from the RB-Tree when the usage goes below the soft
   limit

The next set of patches will exploit the RB-Tree to get the group that is
over its soft limit by the largest amount and reclaim from it, when we
face memory contention.

[hugh.dickins@tiscali.co.uk: CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_PREEMPT=y fails to boot]
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an interface to allow get/set of soft limits.  Soft limits for memory
plus swap controller (memsw) is currently not supported.  Resource
counters have been enhanced to support soft limits and new type
RES_SOFT_LIMIT has been added.  Unlike hard limits, soft limits can be
directly set and do not need any reclaim or checks before setting them to
a newer value.

Kamezawa-San raised a question as to whether soft limit should belong to
res_counter.  Since all resources understand the basic concepts of hard
and soft limits, it is justified to add soft limits here.  Soft limits are
a generic resource usage feature, even file system quotas support soft
limits.
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Alter the ss->can_attach and ss->attach functions to be able to deal with
a whole threadgroup at a time, for use in cgroup_attach_proc.  (This is a
pre-patch to cgroup-procs-writable.patch.)

Currently, new mode of the attach function can only tell the subsystem
about the old cgroup of the threadgroup leader.  No subsystem currently
needs that information for each thread that's being moved, but if one were
to be added (for example, one that counts tasks within a group) this bit
would need to be reworked a bit to tell the subsystem the right
information.

[hidave.darkstar@gmail.com: fix build]
Signed-off-by: NBen Blum <bblum@google.com>
Signed-off-by: NPaul Menage <menage@google.com>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Reviewed-by: NMatt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changes css_set freeing mechanism to be under RCU

This is a prepatch for making the procs file writable. In order to free the
old css_sets for each task to be moved as they're being moved, the freeing
mechanism must be RCU-protected, or else we would have to have a call to
synchronize_rcu() for each task before freeing its old css_set.
Signed-off-by: NBen Blum <bblum@google.com>
Signed-off-by: NPaul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Separates all pidlist allocation requests to a separate function that
judges based on the requested size whether or not the array needs to be
vmalloced or can be gotten via kmalloc, and similar for kfree/vfree.
Signed-off-by: NBen Blum <bblum@google.com>
Signed-off-by: NPaul Menage <menage@google.com>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously there was the problem in which two processes from different pid
namespaces reading the tasks or procs file could result in one process
seeing results from the other's namespace.  Rather than one pidlist for
each file in a cgroup, we now keep a list of pidlists keyed by namespace
and file type (tasks versus procs) in which entries are placed on demand.
Each pidlist has its own lock, and that the pidlists themselves are passed
around in the seq_file's private pointer means we don't have to touch the
cgroup or its master list except when creating and destroying entries.
Signed-off-by: NBen Blum <bblum@google.com>
Signed-off-by: NPaul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

struct cgroup used to have a bunch of fields for keeping track of the
pidlist for the tasks file.  Those are now separated into a new struct
cgroup_pidlist, of which two are had, one for procs and one for tasks.
The way the seq_file operations are set up is changed so that just the
pidlist struct gets passed around as the private data.

Interface example: Suppose a multithreaded process has pid 1000 and other
threads with ids 1001, 1002, 1003:
$ cat tasks
1000
1001
1002
1003
$ cat cgroup.procs
1000
$
Signed-off-by: NBen Blum <bblum@google.com>
Signed-off-by: NPaul Menage <menage@google.com>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following series adds a "cgroup.procs" file to each cgroup that
reports unique tgids rather than pids, and allows all threads in a
threadgroup to be atomically moved to a new cgroup.

The subsystem "attach" interface is modified to support attaching whole
threadgroups at a time, which could introduce potential problems if any
subsystem were to need to access the old cgroup of every thread being
moved.  The attach interface may need to be revised if this becomes the
case.

Also added is functionality for read/write locking all CLONE_THREAD
fork()ing within a threadgroup, by means of an rwsem that lives in the
sighand_struct, for per-threadgroup-ness and also for sharing a cacheline
with the sighand's atomic count.  This scheme should introduce no extra
overhead in the fork path when there's no contention.

The final patch reveals potential for a race when forking before a
subsystem's attach function is called - one potential solution in case any
subsystem has this problem is to hang on to the group's fork mutex through
the attach() calls, though no subsystem yet demonstrates need for an
extended critical section.

This patch:

Revert

commit 096b7fe0
Author:     Li Zefan <lizf@cn.fujitsu.com>
AuthorDate: Wed Jul 29 15:04:04 2009 -0700
Commit:     Linus Torvalds <torvalds@linux-foundation.org>
CommitDate: Wed Jul 29 19:10:35 2009 -0700

    cgroups: fix pid namespace bug

This is in preparation for some clashing cgroups changes that subsume the
original commit's functionaliy.

The original commit fixed a pid namespace bug which Ben Blum fixed
independently (in the same way, but with different code) as part of a
series of patches.  I played around with trying to reconcile Ben's patch
series with Li's patch, but concluded that it was simpler to just revert
Li's, given that Ben's patch series contained essentially the same fix.
Signed-off-by: NPaul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the restriction that a cgroup hierarchy must have at
least one bound subsystem.  The mount option "none" is treated as an
explicit request for no bound subsystems.

A hierarchy with no subsystems can be useful for plain task tracking, and
is also a step towards the support for multiply-bindable subsystems.

As part of this change, the hierarchy id is no longer calculated from the
bitmask of subsystems in the hierarchy (since this is not guaranteed to be
unique) but is allocated via an ida.  Reference counts on cgroups from
css_set objects are now taken explicitly one per hierarchy, rather than
one per subsystem.

Example usage:

mount -t cgroup -o none,name=foo cgroup /mnt/cgroup

Based on the "no-op"/"none" subsystem concept proposed by
kamezawa.hiroyu@jp.fujitsu.com
Signed-off-by: NPaul Menage <menage@google.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the cgroups code makes the assumption that the subsystem
pointers in a struct css_set uniquely identify the hierarchy->cgroup
mappings associated with the css_set; and there's no way to directly
identify the associated set of cgroups other than by indirecting through
the appropriate subsystem state pointers.

This patch removes the need for that assumption by adding a back-pointer
from struct cg_cgroup_link object to its associated cgroup; this allows
the set of cgroups to be determined by traversing the cg_links list in
the struct css_set.
Signed-off-by: NPaul Menage <menage@google.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While it's architecturally clean to have the cgroup debug subsystem be
completely independent of the cgroups framework, it limits its usefulness
for debugging the contents of internal data structures.  Move the debug
subsystem code into the scope of all the cgroups data structures to make
more detailed debugging possible.
Signed-off-by: NPaul Menage <menage@google.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>