This patch inverts the callback hierarchy for NFS write calls.

Instead of having the NFSv2/v3/v4-specific code set up the RPC callback
ops, we allow the original caller to do so. This allows for more
flexibility w.r.t. how to set up and tear down the nfs_write_data
structure while still allowing the NFSv3/v4 code to perform error
handling.

The greater flexibility is needed by the asynchronous O_DIRECT code, which
wants to be able to hold on to the original nfs_write_data structures after
the WRITE RPC call has completed in order to be able to replay them if the
COMMIT call determines that the server has rebooted.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently lockd identifies its own locks using the FL_LOCKD flag.  This
doesn't scale well to multiple lock managers--if we did this in nfsv4 too,
for example, we'd be left with only one free flag bit.

Instead, we just check whether the file manager ops (fl_lmops) set on this
lock are our own.

The only use for this is in nlm_traverse_locks, which uses it to find locks
that need cleaning up when freeing a host or a file.

In the long run it might be nice to do reference counting instead of
traversing all the locks like this....
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

posix_test_lock() returns a pointer to a struct file_lock which is unprotected
and can be removed while in use by the caller.  Move the conflicting lock from
the return to a parameter, and copy the conflicting lock.

In most cases the caller ends up putting the copy of the conflicting lock on
the stack.  On i386, sizeof(struct file_lock) appears to be about 100 bytes.
We're assuming that's reasonable.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

posix_lock_file() is used to add a blocked lock to Lockd's block, so
posix_block_lock() is no longer needed.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean-up: replace rpc_call() helper with direct call to rpc_call_sync.

This makes NFSv2 and NFSv3 synchronous calls more computationally
efficient, and reduces stack consumption in functions that used to
invoke rpc_call more than once.

Test plan:
Compile kernel with CONFIG_NFS enabled.  Connectathon on NFS version 2,
version 3, and version 4 mount points.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add fields to the rpc_procinfo struct that allow the display of a
human-readable name for each procedure in the rpc_iostats output.

Also fix it so that the NFSv4 stats are broken up correctly by
sub-procedure number.  NFSv4 uses only two real RPC procedures:
NULL, and COMPOUND.

Test plan:
Mount with NFSv2, NFSv3, and NFSv4, and do "cat /proc/self/mountstats".
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a simple mechanism for collecting stats in the RPC client.  Stats are
tabulated during xprt_release.  Note that per_cpu shenanigans are not
required here because the RPC client already serializes on the transport
write lock.

Test plan:
Compile kernel with CONFIG_NFS enabled.  Basic performance regression
testing with high-speed networking and high performance server.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Account for various things that occur while an RPC task is executed.
Separate timers for RPC round trip and RPC execution time show how
long RPC requests wait in queue before being sent.  Eventually these
will be accumulated at xprt_release time in one place where they can
be viewed from userland.

Test plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Monitor generic transport events.  Add a transport switch callout to
format transport counters for export to user-land.

Test plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

RPC wait queue length will eventually be exported to userland via the RPC
iostats interface.

Test plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a field in nfs_server to record a timestamp when a mount succeeds.
Report the number of seconds the file system has been mounted via
nfs_show_stats().

Test plan:
Mount an NFS file system, watch the mountstats reports and compare with
clock time.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a per-superblock performance counter facility to the NFS client.  This
facility mimics the counters available for block devices and for
networking.  Expose these new counters via the new /proc/self/mountstats
interface.

Thanks to Andrew Morton and Trond Myklebust for their review and comments.

Test plan:
fsx and iozone on UP and SMP systems, with and without pre-emption.  Watch
for memory overwrite bugs, and performance loss (significantly more CPU
required per op).
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Sometimes it's important to know the exact RPC retransmit settings the
kernel is using for an NFS mount point.  Add this facility to the NFS
client's show_options method.

Test plan:
Set various retransmit settings via the mount command, and check that the
settings are reflected in /proc/mounts.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Create a new file under /proc/self, called mountstats, where mounted file
systems can export information (configuration options, performance counters,
and so on).  Use a mechanism similar to /proc/mounts and s_ops->show_options.

This mechanism does not violate namespace security, and is safe to use while
other processes are unmounting file systems.

Thanks to Mike Waychison for his review and comments.

Test-plan:
Test concurrent mount/unmount operations while cat'ing /proc/self/mountstats.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

read_cache_mtime is no longer used in nfs_inode. This patch removes
references of read_cache_mtime in the code comments.
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead we use the nlm_lockowner->pid.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The nfs_open_context may live longer than the file descriptor that spawned
it, so it needs to carry a reference to the vfsmount. If not, then
generic_shutdown_super() may end up being called before reads and writes
have been flushed out.

Make a couple of functions static while we're at it...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The 40-bit DMA workaround recently implemented for 5714, 5715, and
5780 needs to be expanded because there may be other tg3 devices
behind the EPB Express to PCIX bridge in the 5780 class device.

For example, some 4-port card or mother board designs have 5704 behind
the 5714.

All devices behind the EPB require the 40-bit DMA workaround.

Thanks to Chris Elmquist again for reporting the problem and testing
the patch.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the AX.25 dialect chosen by the sysadmin is set to DAMA master / 3
(or DAMA slave / 2, if CONFIG_AX25_DAMA_SLAVE=n) ax25_kick() will fall
through the switch statement without calling ax25_send_iframe() or any
other function that would eventually free skbn thus leaking the packet.

Fix by restricting the sysctl inferface to allow only actually supported
AX.25 dialects.

The system administration mistake needed for this to happen is rather
unlikely, so this is an uncritical hole.

Coverity #651.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

    
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>:
    
sb1250_gettimeoffset() simply reads the current cpu 0 timer remaining
value, however once this counter reaches 0 and the interrupt is raised,
it immediately resets and begins to count down again.
    
If sb1250_gettimeoffset() is called on cpu 1 via do_gettimeofday() after
the timer has reset but prior to cpu 0 processing the interrupt and
taking write_seqlock() in timer_interrupt() it will return a full value
(or close to it) causing time to jump backwards 1ms. Once cpu 0 handles
the interrupt and timer_interrupt() gets far enough along it will jump
forward 1ms.
    
Fix this problem by implementing mips_hpt_*() on sb1250 using a spare
timer unrelated to the existing periodic interrupt timers. It runs at
1Mhz with a full 23bit counter.  This eliminated the custom
do_gettimeoffset() for sb1250 and allowed use of the generic
fixed_rate_gettimeoffset() using mips_hpt_*() and timerhi/timerlo.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>:
    
Field width should be 23 bits not 20 bits.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
If a call to set_io_port_base() was being followed by usage of
mips_io_port_base in the same function gcc was possibly using the old
value due to some clever abuse of const.  Adding a barrier will keep
the optimization and result in correct code with latest gcc.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
If dcache_size != icache_size or dcache_size != scache_size, or
set-associative cache, icache/scache does not flushed properly.  Make
blast_?cache_page_indexed() masks its index value correctly.  Also,
use physical address for physically indexed pcache/scache.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
The SB1 core has a three cycle interrupt disable hazard but we were
wrongly treating it as fully interlocked.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It is broken, the condition is checked out of socket lock. It is
wonderful the bug survived for so long time.

[ This fixes bugzilla #6233:
  race condition in tcp_sendmsg when connection became established ]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dynamic add path for PCI Host Bridges can fail to configure children
adapters under P5IOC controllers.  It fails to properly fixup bus/device
resources, and it fails to properly enable EEH.  Both of these steps
need to occur before any children devices are enabled in
pci_bus_add_devices().
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Patch from Ben Dooks

The enable_hlt and disable_hlt should be declared in
include/asm/setup.h. This fixes sparse errors from
arch/arm/kernel/process.c
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch removes the reliance of iwmmxt on hand coded alignments.
Since thread_info is always 8K aligned, specifying that fpstate is
8-byte aligned achieves the same effect without needing to resort
to hand coded alignments.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The patch '[PATCH] RCU signal handling' [1] added an export for
__put_task_struct_cb, a put_task_struct helper newly introduced in that
patch.  But the put_task_struct couldn't be used modular previously as
__put_task_struct wasn't exported.  There are not callers of it in modular
code, and it shouldn't be exported because we don't want drivers to hold
references to task_structs.

This patch removes the export and folds __put_task_struct into
__put_task_struct_cb as there's no other caller.

[1] http://www2.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e56d090310d7625ecb43a1eeebd479f04affb48bSigned-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NPaul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes illegal __GFP_FS allocation inside ext3 transaction in
ext3_symlink().  Such allocation may re-enter ext3 code from
try_to_free_pages.  But JBD/ext3 code keeps a pointer to current journal
handle in task_struct and, hence, is not reentrable.

This bug led to "Assertion failure in journal_dirty_metadata()" messages.

http://bugzilla.openvz.org/show_bug.cgi?id=115Signed-off-by: NAndrey Savochkin <saw@saw.sw.com.sg>
Signed-off-by: NKirill Korotaev <dev@openvz.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The cache reaper currently tries to free all alien caches and all remote
per cpu pages in each pass of cache_reap.  For a machines with large number
of nodes (such as Altix) this may lead to sporadic delays of around ~10ms.
Interrupts are disabled while reclaiming creating unacceptable delays.

This patch changes that behavior by adding a per cpu reap_node variable.
Instead of attempting to free all caches, we free only one alien cache and
the per cpu pages from one remote node.  That reduces the time spend in
cache_reap.  However, doing so will lengthen the time it takes to
completely drain all remote per cpu pagesets and all alien caches.  The
time needed will grow with the number of nodes in the system.  All caches
are drained when they overflow their respective capacity.  So the drawback
here is only that a bit of memory may be wasted for awhile longer.

Details:

1. Rename drain_remote_pages to drain_node_pages to allow the specification
   of the node to drain of pcp pages.

2. Add additional functions init_reap_node, next_reap_node for NUMA
   that manage a per cpu reap_node counter.

3. Add a reap_alien function that reaps only from the current reap_node.

For us this seems to be a critical issue.  Holdoffs of an average of ~7ms
cause some HPC benchmarks to slow down significantly.  F.e.  NAS parallel
slows down dramatically.  NAS parallel has a 12-16 seconds runtime w/o rotor
compared to 5.8 secs with the rotor patches.  It gets down to 5.05 secs with
the additional interrupt holdoff reductions.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We require that all archs implement atomic_cmpxchg(), for the generic
version of atomic_add_unless().
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix some bugs in mtd/jffs2 on 64bit platform.

The MEMGETBADBLOCK/MEMSETBADBLOCK ioctl are not listed in compat_ioctl.h.

And some variables in jffs2 are declared as uint32_t but used to hold
size_t values.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

    
This is gluing the build of cirrusfb but really the mess that would need
cleaning and fixing is <video/vga.h> and <linux/vt_buffer.h> ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

ATI chipsets tend to generate double timer interrupts for the local APIC
timer when both the 8254 and the IO-APIC timer pins are enabled.  This is
because they route it to both and the result is anded together and the CPU
ends up processing it twice.

This patch changes check_timer to disable the 8254 routing for interrupt 0.

I think it would be safe on all chipsets actually (i tested it on a couple
and it worked everywhere) and Windows seems to do it in a similar way, but
to be conservative this patch only enables this mode on ATI (and adds
options to enable/disable too)

Ported over from a similar x86-64 change.

I reused the ACPI earlyquirk infrastructure for the ATI bridge check, but
tweaked it a bit to work even without ACPI.

Inspired by a patch from Chuck Ebbert, but redone.

Cc: Chuck Ebbert <76306.1226@compuserve.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While testing kexec and kdump we hit problems where the new kernel would
freeze or instantly reboot.  The easiest way to trigger it was to kexec a
kernel compiled for CONFIG_M586 on an athlon cpu.  Compiling for CONFIG_MK7
instead would work fine.

The patch fixes a few problems with the kexec inline asm.
Signed-off-by: NChris Mason <mason@suse.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I have benchmarked this on an x86_64 NUMA system and see no significant
performance difference on kernbench.  Tested on both x86_64 and powerpc.

The way we do file struct accounting is not very suitable for batched
freeing.  For scalability reasons, file accounting was
constructor/destructor based.  This meant that nr_files was decremented
only when the object was removed from the slab cache.  This is susceptible
to slab fragmentation.  With RCU based file structure, consequent batched
freeing and a test program like Serge's, we just speed this up and end up
with a very fragmented slab -

llm22:~ # cat /proc/sys/fs/file-nr
587730  0       758844

At the same time, I see only a 2000+ objects in filp cache.  The following
patch I fixes this problem.

This patch changes the file counting by removing the filp_count_lock.
Instead we use a separate percpu counter, nr_files, for now and all
accesses to it are through get_nr_files() api.  In the sysctl handler for
nr_files, we populate files_stat.nr_files before returning to user.

Counting files as an when they are created and destroyed (as opposed to
inside slab) allows us to correctly count open files with RCU.
Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds new tunables for RCU queue and finished batches.  There are
two types of controls - number of completed RCU updates invoked in a batch
(blimit) and monitoring for high rate of incoming RCUs on a cpu (qhimark,
qlowmark).

By default, the per-cpu batch limit is set to a small value.  If the input
RCU rate exceeds the high watermark, we do two things - force quiescent
state on all cpus and set the batch limit of the CPU to INTMAX.  Setting
batch limit to INTMAX forces all finished RCUs to be processed in one shot.
 If we have more than INTMAX RCUs queued up, then we have bigger problems
anyway.  Once the incoming queued RCUs fall below the low watermark, the
batch limit is set to the default.
Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement percpu_counter_sum().  This is a more accurate but slower version of
percpu_counter_read_positive().

We need this for Alex's speedup-ext3_statfs patch and for the nr_file
accounting fix.  Otherwise these things would be too inaccurate on large CPU
counts.

Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Cc: Alex Tomas <alex@clusterfs.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>