MDSS represents the top level wrapper that contains MDP5, DSI, HDMI and
other sub-blocks. W.r.t device heirarchy, it's the parent of all these
devices. The power domain of this device is actually tied to the GDSC
hw. When any sub-device enables its PD, MDSS's PD is also enabled.

The suspend/resume ops enable the top level clocks that end at the MDSS
boundary. For now, we're letting them all be optional, since the child
devices anyway hold a ref to these clocks.

Until now, we'd called a runtime_get() during probe, which ensured that
the GDSC was always on. Now that we've set up runtime PM for the children
devices, we can get rid of this hack.

Note: that the MDSS device is the platform_device in msm_drv.c. The
msm_runtime_suspend/resume ops call the funcs that enable/disable
the top level MDSS clocks. This is different from MDP4, where the
platform device created in msm_drv.c represents MDP4 itself. It would
have been nicer to hide these differences by adding new kms funcs, but
runtime PM needs to be enabled before kms is set up (i.e, msm_kms_init
is called).
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Requests for assigning/freeing SMP blocks by planes are collected during
the atomic check phase, and represented by mdp5_smp_state's 'assigned'
and 'released' members.

Once the atomic state is committed, these members are reset to 0,
indicating that the existing configuration satisfies all the planes.
Future atomic commits will copy the old mdp5_smp_state, and the 'assigned'
and 'released' members would be updated only if there was a change in
the plane configurations.

When we disable and re-enable display, we lose the values we wrote to the
SMP registers, but the code doesn't program the registers because there
isn't any change in mdp5_smp_state.

Fix this by writing to the registers irrespective of whether there was
a change in SMP state or not. We do this by keeping a cache of the
register values, and write them every time we commit a state.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

We shouldn't use use mode_set/mode_set_nofb helpers when we use runtime
PM. The registers configured in these funcs lose their state when we
eventually enable the display pipeline.

Do not implement these vfuncs in the helpers, and call them in the
crtc_enable/encoder_enable paths instead.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The bus clocks are always enabled/disabled along with the power
domain, so move it to the runtime suspend/resume ops. This cleans
up the clock code a bit. Get rid of the clk_mutex mutex since it
isn't needed.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Call the pm_runtime_get/put API where we need the clocks enabled.

The main entry/exit points are 1) enabling/disabling the DSI bridge
and 2) Sending commands from the DSI host to the device.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Enable rudimentary runtime PM in the HDMI driver. We can't really do
agressive PM toggling at the moment because we need to leave the hpd
clocks enabled all the time. There isn't much benefit of creating
suspend/resume ops to toggle clocks either.

We just make sure that we configure the power domain in the HDMI bridge's
enable/disable paths, and the HDMI connector's detect() op.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

mdp5_enable/disable calls are scattered all around in the MDP5 code.
Use the pm_runtime_get/put calls here instead, and populate the
runtime PM suspend/resume ops to manage the clocks.

About the overall design: MDP5 is a child of the top level MDSS
device. MDSS is also the parent to DSI, HDMI and other interfaces. When
we enable MDP5's power domain, we end up enabling MDSS's PD too. It is
only MDSS's PD that actually controlls the GDSC HW. Therefore, calling
runtime_get/put on the MDP5 device is like just requesting a vote to
enable/disable the GDSC.

Functionally, replacing the clock enable/disable calls with the RPM API
can result in the power domain (GDSC) state being toggled if no other
child isn't powered on. This can result in the register context being lost.
We make sure (in future commits) that code paths don't end up configuring
registers and then later lose state, resulting in a bad HW state.

For now, we've replaced each mdp5_enable/disable with runtime_get/put API.
We could optimize things later by removing runtime_get/put calls which
don't really need to be there. This could prevent unnecessary toggling of
the power domain and clocks.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t
into dmam_alloc_coherent, which the compiler warns about:

drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt':
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]

The returned DMA address is later passed on to a function that
takes a phys_addr_t, so it's clearly wrong to use the DMA
mapping interface here: the memory may be uncached, or the
address may be completely wrong if there is an IOMMU connected
to the device. What the code actually wants to do is to get
the physical address from the reserved-mem node. It goes through
the dma-mapping interfaces for obscure reasons, and this
apparently only works by chance, relying on specific bugs
in the error handling of the arm64 dma-mapping implementation.

The same problem existed in the "venus" media driver, which was
now fixed by Stanimir Varbanov after long discussions.

In order to make some progress here, I have now ported his
approach over to the adreno driver. The patch is currently
untested, and should get a good review, but it is now much
simpler than the original, and it should be obvious what
goes wrong if I made a mistake in the port.

See also: a6e2d36b ("media: venus: don't abuse dma_alloc for non-DMA allocations")
Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Fixes: 7c65817e ("drm/msm: gpu: Enable zap shader for A5XX")
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Acked-and-Tested-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRob Clark <robdclark@gmail.com>

When compile-testing for something other than ARCH_QCOM,
we run into a link error:

drivers/gpu/drm/msm/adreno/a5xx_gpu.o: In function `a5xx_hw_init':
a5xx_gpu.c:(.text.a5xx_hw_init+0x600): undefined reference to `qcom_mdt_get_size'
a5xx_gpu.c:(.text.a5xx_hw_init+0x93c): undefined reference to `qcom_mdt_load'

There is already an #ifdef that tries to check for CONFIG_QCOM_MDT_LOADER,
but that symbol is only meaningful when building for ARCH_QCOM.

This adds a compile-time check for ARCH_QCOM, and clarifies the
Kconfig select statement so we don't even try it for other targets.

The check for CONFIG_QCOM_MDT_LOADER can then go away, which also
improves compile-time coverage and makes the code a little nicer
to read.

Fixes: 7c65817e ("drm/msm: gpu: Enable zap shader for A5XX")
Acked-by: NJordan Crouse <jcrouse@codeaurora.org>
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRob Clark <robdclark@gmail.com>

msm_gpu's get_timestamp() op (called by the MSM_GET_PARAM ioctl) can
result in register accesses. We need our power domain and clocks to
be active for that. Make sure they are enabled here.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Fix a typo in msm_ioctl_gem_submit - check args->flags for the
MSM_SUBMIT_NO_IMPLICIT flag instead of args->fence.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

On A5XX GPU hardware clock gating needs to be turned off before
reading certain GPU registers via AHB. Turn off HWCG before calling
adreno_show() to safely dump all the registers without a system hang.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

There are some use cases wherein we need to turn off hardware clock
gating before reading certain registers. Modify the A5XX HWCG function
to allow user to enable or disable clock gating at will.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The 0xf400 and 0xf800 ranges are in the RBBM_SECVID block which may
be protected from CPU access. Skip dumping them since they are minimally
useful for debugging and they aren't worth a system hang.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

We have upstream bindings (msm8916) that have the "_clk" suffix in the
clock names. The downstream bindings also require it.

We want to drop the "_clk" suffix and at the same time support existing
bindings. Update the MDP5 code with the the msm_clk_get() helper to
support both old and new clock names.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The mdp5_cmd_encoder_disable is accidentally called in the encoder enable
path. We've not seen any problems since we haven't tested with command
mode panels in a while. Fix the copy-paste error.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

While I was testing the upcoming adv7533 CEC support with my Dragonboard c410
I encountered this NULL pointer dereference:

[   17.912822] Unable to handle kernel NULL pointer dereference at virtual address 000000e8
[   17.917191] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800030e9f000
[   17.925249] [00000000000000e8] *pgd=00000000b0daf003, *pud=0000000000000000
[   17.931650] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[   17.938395] Modules linked in: btqcomsmd btqca arc4 wcn36xx mac80211 bluetooth cfg80211 ecdh_generic r8152 snd_soc_hdmi_codec adv7511 cec
qcom_wcnss_pil msm mdt_loader drm_kms_helper msm_rng rng_core drm
[   17.943967] CPU: 0 PID: 1684 Comm: Xorg Tainted: G        W       4.13.0-rc1-dragonboard #111
[   17.962005] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[   17.970685] task: ffff800031236c00 task.stack: ffff800033fbc000
[   17.977582] PC is at msm_gem_unmap_vma+0x20/0x80 [msm]
[   17.983213] LR is at put_iova+0x60/0xb8 [msm]
[   17.988303] pc : [<ffff000000ac2d58>] lr : [<ffff000000ac07c8>] pstate: 20000145
[   17.992733] sp : ffff800033fbfb30
[   18.000193] x29: ffff800033fbfb30 x28: ffff800030b5f000
[   18.003407] x27: 00000000000000b4 x26: ffff0000009f8cd8
[   18.008789] x25: 0000000000000004 x24: dead000000000100
[   18.014085] x23: dead000000000200 x22: ffff800030b5fd40
[   18.019379] x21: ffff800030b5fc00 x20: 0000000000000000
[   18.024675] x19: ffff80003082bf00 x18: 0000000000000000
[   18.029970] x17: 0000ffffb3347e70 x16: ffff000008207638
[   18.035265] x15: 0000000000000053 x14: 0000000000000000
[   18.040560] x13: 0000000000000038 x12: 0101010101010101
[   18.045855] x11: 7f7f7f7f7f7f7f7f x10: 0000000000000040
[   18.051150] x9 : ffff800030b5f038 x8 : ffff800031657b50
[   18.056446] x7 : ffff800031657b78 x6 : 0000000000000000
[   18.061740] x5 : 0000000000000000 x4 : 00000000b5c01000
[   18.067036] x3 : 0000000000000000 x2 : ffff8000337bf300
[   18.072330] x1 : ffff80003082bf00 x0 : 0000000000000000
[   18.077629] Process Xorg (pid: 1684, stack limit = 0xffff800033fbc000)
[   18.082925] Stack: (0xffff800033fbfb30 to 0xffff800033fc0000)
[   18.089262] fb20:                                   ffff800033fbfb60 ffff000000ac07c8
[   18.095081] fb40: ffff80003082bf00 ffff800030b5fc90 ffff800030b5fc00 ffff000000abf4a0
[   18.102893] fb60: ffff800033fbfba0 ffff000000ac16b0 ffff800030b5fc00 ffff8000338ff870
[   18.110706] fb80: ffff8000338ff800 ffff800030b5fc00 ffff800030b5fda8 ffff800033fbfd80
[   18.118518] fba0: ffff800033fbfbe0 ffff0000009d4244 ffff800030b5fc00 ffff800030b5f038
[   18.126332] fbc0: ffff800033fbfbd0 ffff800030b5fc00 ffff800030b5f038 ffff0000009d4840
[   18.134144] fbe0: ffff800033fbfbf0 ffff0000009d4858 ffff800033fbfc10 ffff0000009d48e4
[   18.141955] fc00: ffff800030b5fc00 ffff8000338ffd98 ffff800033fbfc30 ffff0000009d49a4
[   18.149768] fc20: ffff800030b5fc00 ffff800030b5f000 ffff800033fbfc60 ffff0000009d4a4c
[   18.157581] fc40: ffff800030b5f050 ffff800030b5f000 0000000000000001 ffff800030b5fc00
[   18.165394] fc60: ffff800033fbfca0 ffff0000009d4ab0 0000000000000018 ffff800030b5f000
[   18.173206] fc80: ffff0000009efd28 ffff800033fbfd80 ffff8000338ff800 ffff0000009d56a8
[   18.181019] fca0: ffff800033fbfcb0 ffff0000009efd54 ffff800033fbfcc0 ffff0000009d56c8
[   18.188831] fcc0: ffff800033fbfd00 ffff0000009d58e0 ffff0000009fa6e0 00000000c00464b4
[   18.196643] fce0: 0000000000000004 ffff80003082b400 0000ffffea1f0e00 0000000000000000
[   18.204456] fd00: ffff800033fbfe00 ffff000008206f0c ffff80000335caf8 ffff80003082b400
[   18.212269] fd20: 0000ffffea1f0e00 ffff80003082b400 00000000c00464b4 0000ffffea1f0e00
[   18.220081] fd40: 0000000000000124 000000000000001d ffff0000089d2000 ffff800031236c00
[   18.227894] fd60: ffff800033fbfd80 0000000000000004 ffff0000009efd28 ffff800033fbfd80
[   18.235706] fd80: 0000000100000001 0000008000000001 0000001800000020 0000000000000001
[   18.243518] fda0: 0000000100000000 0000000100000001 0000ffff00000000 0000ffff00000000
[   18.251331] fdc0: 0000000000000124 0000000000000038 ffff0000089d2000 ffff800031236c00
[   18.259144] fde0: ffff800033fbfe40 ffff000008214124 ffff800033fbfe30 ffff000008203290
[   18.266956] fe00: ffff800033fbfe80 ffff0000082076b4 0000000000000000 ffff800030d8a000
[   18.274768] fe20: ffff80003082b400 0000000000000016 ffff800033fbfe50 ffff0000081f0488
[   18.282581] fe40: ffff800033fbfe80 ffff000008207678 0000000000000000 ffff80003082b400
[   18.290393] fe60: ffff800033fbfe70 ffff0000082138b0 ffff800033fbfe80 ffff000008207658
[   18.298207] fe80: 0000000000000000 ffff000008082f84 0000000000000000 0000800034a16000
[   18.306017] fea0: ffffffffffffffff 0000ffffb3347e7c 0000000000000000 0000000000000015
[   18.313832] fec0: 0000000000000016 00000000c00464b4 0000ffffea1f0e00 0000000000000001
[   18.321643] fee0: 0000000000000020 0000000000000080 0000000000000001 0000000000000000
[   18.329456] ff00: 000000000000001d 000000012692c5b0 0101010101010101 7f7f7f7f7f7f7f7f
[   18.337269] ff20: 0101010101010101 0000000000000038 0000000000000000 0000000000000053
[   18.345082] ff40: 0000ffffb368b2b8 0000ffffb3347e70 0000000000000000 0000ffffb3847000
[   18.352894] ff60: 0000ffffea1f0e00 00000000c00464b4 0000000000000016 0000ffffea1f0edc
[   18.360705] ff80: 000000012692ad20 0000000000000003 00000001214282e4 0000000121428388
[   18.368518] ffa0: 0000000000000000 0000ffffea1f0da0 0000ffffb367185c 0000ffffea1f0da0
[   18.376332] ffc0: 0000ffffb3347e7c 0000000000000000 0000000000000016 000000000000001d
[   18.384142] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   18.391953] Call trace:
[   18.399760] Exception stack(0xffff800033fbf950 to 0xffff800033fbfa80)
[   18.402023] f940:                                   ffff80003082bf00 0001000000000000
[   18.408622] f960: ffff800033fbfb30 ffff000000ac2d58 0000000020000145 ffff8000338ffa78
[   18.416435] f980: 0000000000000000 0000000000000000 ffff800033fbf9e0 ffff0000089afcf0
[   18.424248] f9a0: ffff80000348f230 ffff8000338ffa78 0000000000000000 0000000000000000
[   18.432060] f9c0: ffff8000338ffaa8 0000000000000001 ffff800033fbfb80 ffff0000009e8f38
[   18.439872] f9e0: ffff800033fbfa10 ffff0000089a9ff8 0000000000000027 ffff80003082b918
[   18.447684] fa00: 0000000000000000 ffff80003082bf00 ffff8000337bf300 0000000000000000
[   18.455497] fa20: 00000000b5c01000 0000000000000000 0000000000000000 ffff800031657b78
[   18.463310] fa40: ffff800031657b50 ffff800030b5f038 0000000000000040 7f7f7f7f7f7f7f7f
[   18.471122] fa60: 0101010101010101 0000000000000038 0000000000000000 0000000000000053
[   18.479062] [<ffff000000ac2d58>] msm_gem_unmap_vma+0x20/0x80 [msm]
[   18.486862] [<ffff000000ac07c8>] put_iova+0x60/0xb8 [msm]
[   18.492938] [<ffff000000ac16b0>] msm_gem_free_object+0x60/0x198 [msm]
[   18.498432] [<ffff0000009d4244>] drm_gem_object_free+0x1c/0x58 [drm]
[   18.504854] [<ffff0000009d4858>] drm_gem_object_put_unlocked+0x90/0xa0 [drm]
[   18.511273] [<ffff0000009d48e4>] drm_gem_object_handle_put_unlocked+0x64/0xd0 [drm]
[   18.518300] [<ffff0000009d49a4>] drm_gem_object_release_handle+0x54/0x98 [drm]
[   18.525679] [<ffff0000009d4a4c>] drm_gem_handle_delete+0x64/0xb8 [drm]
[   18.532968] [<ffff0000009d4ab0>] drm_gem_dumb_destroy+0x10/0x18 [drm]
[   18.539479] [<ffff0000009efd54>] drm_mode_destroy_dumb_ioctl+0x2c/0x40 [drm]
[   18.545992] [<ffff0000009d56c8>] drm_ioctl_kernel+0x68/0xe0 [drm]
[   18.553105] [<ffff0000009d58e0>] drm_ioctl+0x178/0x3b0 [drm]
[   18.558970] [<ffff000008206f0c>] do_vfs_ioctl+0xa4/0x7d0
[   18.564694] [<ffff0000082076b4>] SyS_ioctl+0x7c/0x98
[   18.569992] [<ffff000008082f84>] el0_svc_naked+0x38/0x3c
[   18.574941] Code: a90153f3 aa0003f4 f90013f5 aa0103f3 (f9407400)
[   18.580502] ---[ end trace b1ac6888ec40b0be ]---

It turns out that the aspace argument in msm_gem_unmap_vma() is NULL.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
[Note: this case gets hit with !IOMMU config]
Signed-off-by: NRob Clark <robdclark@gmail.com>

While I was testing the upcoming adv7533 CEC support with my Dragonboard c410
I encountered this warning several times during boot:

[    4.408309] WARNING: CPU: 3 PID: 1347 at drivers/gpu/drm/msm/msm_gem.c:312 add_vma+0x78/0x88 [msm]
[    4.412951] Modules linked in: snd_soc_hdmi_codec adv7511 cec qcom_wcnss_pil msm mdt_loader drm_kms_helper msm_rng rng_core drm
[    4.421728] CPU: 3 PID: 1347 Comm: kworker/3:3 Not tainted 4.13.0-rc1-dragonboard #111
[    4.433090] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    4.441081] Workqueue: events deferred_probe_work_func
[    4.447929] task: ffff800031243600 task.stack: ffff800003394000
[    4.453023] PC is at add_vma+0x78/0x88 [msm]
[    4.458823] LR is at _msm_gem_new+0xd4/0x188 [msm]
[    4.463207] pc : [<ffff000000ac01f8>] lr : [<ffff000000ac06b4>] pstate: 40000145
[    4.467811] sp : ffff8000033978a0
[    4.475357] x29: ffff8000033978a0 x28: ffff8000031dea18
[    4.478572] x27: ffff800003933a00 x26: ffff800003b39800
[    4.483953] x25: ffff8000338ff800 x24: 0000000000000001
[    4.489249] x23: 0000000000000000 x22: ffff800003b39800
[    4.494544] x21: ffff8000338ff800 x20: 0000000000000000
[    4.499839] x19: ffff800003932600 x18: 0000000000000001
[    4.505135] x17: 0000ffff8969e9e0 x16: ffff7e00000ce7a0
[    4.510429] x15: ffffffffffffffff x14: ffff8000833977ef
[    4.515724] x13: ffff8000033977f3 x12: 0000000000000038
[    4.521020] x11: 0101010101010101 x10: ffffff7f7fff7f7f
[    4.526315] x9 : 0000000000000000 x8 : ffff800003932800
[    4.531633] x7 : 0000000000000000 x6 : 000000000000003f
[    4.531644] x5 : 0000000000000040 x4 : 0000000000000000
[    4.531650] x3 : ffff800031243600 x2 : 0000000000000000
[    4.531655] x1 : 0000000000000000 x0 : 0000000000000000
[    4.531670] Call trace:
[    4.531676] Exception stack(0xffff8000033976c0 to 0xffff8000033977f0)
[    4.531683] 76c0: ffff800003932600 0001000000000000 ffff8000033978a0 ffff000000ac01f8
[    4.531688] 76e0: 0000000000000140 0000000000000000 ffff800003932550 ffff800003397780
[    4.531694] 7700: ffff800003397730 ffff000008261ce8 0000000000000000 ffff8000031d2f80
[    4.531699] 7720: ffff800003397800 ffff0000081d671c 0000000000000140 0000000000000000
[    4.531705] 7740: ffff000000ac04c0 0000000000004003 ffff800003397908 00000000014080c0
[    4.531710] 7760: 0000000000000000 ffff800003b39800 0000000000000000 0000000000000000
[    4.531716] 7780: 0000000000000000 ffff800031243600 0000000000000000 0000000000000040
[    4.531721] 77a0: 000000000000003f 0000000000000000 ffff800003932800 0000000000000000
[    4.531726] 77c0: ffffff7f7fff7f7f 0101010101010101 0000000000000038 ffff8000033977f3
[    4.531730] 77e0: ffff8000833977ef ffffffffffffffff
[    4.531881] [<ffff000000ac01f8>] add_vma+0x78/0x88 [msm]
[    4.532011] [<ffff000000ac06b4>] _msm_gem_new+0xd4/0x188 [msm]
[    4.532134] [<ffff000000ac1900>] msm_gem_new+0x10/0x18 [msm]
[    4.532260] [<ffff000000acb274>] msm_dsi_host_modeset_init+0x17c/0x268 [msm]
[    4.532384] [<ffff000000ac9024>] msm_dsi_modeset_init+0x34/0x1b8 [msm]
[    4.532504] [<ffff000000ab6168>] modeset_init+0x408/0x488 [msm]
[    4.532623] [<ffff000000ab6c4c>] mdp5_kms_init+0x2b4/0x338 [msm]
[    4.532745] [<ffff000000abeff8>] msm_drm_bind+0x218/0x4e8 [msm]
[    4.532755] [<ffff00000855d744>] try_to_bring_up_master+0x1f4/0x318
[    4.532762] [<ffff00000855d900>] component_add+0x98/0x180
[    4.532887] [<ffff000000ac8da0>] dsi_dev_probe+0x18/0x28 [msm]
[    4.532895] [<ffff000008565fe8>] platform_drv_probe+0x58/0xc0
[    4.532901] [<ffff00000856410c>] driver_probe_device+0x324/0x458
[    4.532907] [<ffff00000856440c>] __device_attach_driver+0xac/0x170
[    4.532913] [<ffff000008561ef4>] bus_for_each_drv+0x4c/0x98
[    4.532918] [<ffff000008563c38>] __device_attach+0xc0/0x160
[    4.532924] [<ffff000008564530>] device_initial_probe+0x10/0x18
[    4.532929] [<ffff000008562f84>] bus_probe_device+0x94/0xa0
[    4.532934] [<ffff0000085635d4>] deferred_probe_work_func+0x8c/0xe8
[    4.532941] [<ffff0000080d79bc>] process_one_work+0x1d4/0x330
[    4.532946] [<ffff0000080d7b60>] worker_thread+0x48/0x468
[    4.532952] [<ffff0000080ddae4>] kthread+0x12c/0x130
[    4.532958] [<ffff000008082f10>] ret_from_fork+0x10/0x40
[    4.532962] ---[ end trace b1ac6888ec40b0bb ]---
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

After the commit mentioned below, we start computing the byte and pixel
clocks (dsi_calc_clk_rate) in the DSI bridge's mode_set() op. The
calculation involves the number of DSI lanes being used by the
downstream bridge/panel.

If the downstream bridge/panel tries to change the number of DSI lanes
(as done in the ADV7533 driver) in its mode_set() op, then our DSI
host driver will not have the correct number of lanes when computing
byte/pixel clocks.

Fix this by delaying the clock rate calculation in the DSI bridge
enable path. In particular, compute the clock rates in
msm_dsi_host_get_phy_clk_req().

This fixes the DSI host error interrupts seen when we try to switch
between modes that require different number of lanes (4 to 3 lanes, or
vice versa) on db410c. The error interrupts occur since the byte/pixel
clock rates aren't according to what the DSI video mode timing engine
expects.

Fixes: b62aa70a ("drm/msm/dsi: Move PHY operations out of host")
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Fixes an insta-reboot when screen-blanking kicks in, due to cursor
updates without clocks enabled.
Signed-off-by: NRob Clark <robdclark@gmail.com>

We recently added locking to this function but there was a direct return
that was overlooked where we need to unlock.

Fixes: 0e08270a ("drm/msm: Separate locking of buffer resources from struct_mutex")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

We recently added an integer overflow check but it needs an additional
tweak to work properly on 32 bit systems.

The problem is that we're doing the right hand side of the assignment as
type unsigned long so the max it will have an integer overflow instead
of being larger than SIZE_MAX.  That means the "sz > SIZE_MAX" condition
is never true even on 32 bit systems.  We need to first cast it to u64
and then do the math.

Fixes: 4a630fad ("drm/msm: Fix potential buffer overflow issue")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Following compilation warnings were observed for these files:

  CC [M]  drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.o
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c: In function 'blend_setup':
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:223:7: warning: missing braces around initializer [-Wmissing-braces]
  enum mdp5_pipe stage[STAGE_MAX + 1][MAX_PIPE_STAGE] = { SSPP_NONE };
       ^
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:223:7: warning: (near initialization for 'stage[0]') [-Wmissing-braces]
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:224:7: warning: missing braces around initializer [-Wmissing-braces]
  enum mdp5_pipe r_stage[STAGE_MAX + 1][MAX_PIPE_STAGE] = { SSPP_NONE };
       ^
drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:224:7: warning: (near initialization for 'r_stage[0]') [-Wmissing-braces]

drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c: In function 'mdp5_plane_mode_set':
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:892:9: warning: missing braces around initializer [-Wmissing-braces]
  struct phase_step step = { 0 };
         ^
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:892:9: warning: (near initialization for 'step.x') [-Wmissing-braces]
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:893:9: warning: missing braces around initializer [-Wmissing-braces]
  struct pixel_ext pe = { 0 };
         ^
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:893:9: warning: (near initialization for 'pe.left') [-Wmissing-braces]

This happens because in the first case we were initializing a two
dimensional array with {0} and in the second case we were initializing a
struct containing two arrays with {0}.

Fix them by adding another pair of {}.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

In function submit_create, if nr_cmds or nr_bos is assigned with
negative value, the allocated buffer may be small than intended.
Using this buffer will lead to buffer overflow issue.
Signed-off-by: NKasin Li <donglil@codeaurora.org>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Buffer object specific resources like pages, domains, sg list
need not be protected with struct_mutex. They can be protected
with a buffer object level lock. This simplifies locking and
makes it easier to avoid potential recursive locking scenarios
for SVM involving mmap_sem and struct_mutex. This also removes
unnecessary serialization when creating buffer objects, and also
between buffer object creation and GPU command submission.
Signed-off-by: NSushmita Susheelendra <ssusheel@codeaurora.org>
[robclark: squash in handling new locking for shrinker]
Signed-off-by: NRob Clark <robdclark@gmail.com>

A 2 pixel wide pink strip was observed on the left end of some HDMI
monitors configured in a HDMI mode.

It turned out that we were missing out on configuring AVI infoframes, and
unlike APQ8064, the 8x96 HDMI H/W seems to be sensitive to that.

Add configuration of AVI infoframes. While at it, make sure that
hdmi_audio_update is only called when we've detected that the monitor
supports HDMI.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Without doing anything in unprepare, the HDMI driver isn't able to
switch modes successfully. Calling set_rate with a new rate results
in an un-locked PLL.

If we reset the PLL in unprepare, the PLL is able to lock with the
new rate.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Commit c0c0d9ee ("drm/msm: hdmi audio support") uses logical
OR operators to build up a value to be written in the
REG_HDMI_AUDIO_INFO0 and REG_HDMI_AUDIO_INFO1 registers when it
should have used bitwise operators.
Signed-off-by: NLiviu Dudau <liviu.dudau@arm.com>
Fixes: c0c0d9ee ("drm/msm: hdmi audio support")
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

Now that the msm_gem supports an arbitrary number of vma's, we no longer
need to assign an id (index) to each address space.  So rip out the
associated code.
Signed-off-by: NRob Clark <robdclark@gmail.com>

It means we have to do a list traversal where we once had an index into
a table.  But the list will normally have one or two entries.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Pull some of the logic out into msm_gem_new() (since we don't need to
care about the imported-bo case), and don't defer allocating pages.  The
latter is generally a good idea, since if we are using VRAM carveout to
allocate contiguous buffers (ie. no IOMMU), the allocation is more
likely to fail.  So failing at allocation time is a more sane option.
Plus this simplifies things in the next patch.
Signed-off-by: NRob Clark <robdclark@gmail.com>

No functional change, that will come later.  But this will make it
easier to deal with dynamically created address spaces (ie. per-
process pagetables for gpu).
Signed-off-by: NRob Clark <robdclark@gmail.com>

Before we can shift to passing the address-space object to _get_iova(),
we need to fix a few places (dsi+fbdev) that were hard-coding the adress
space id.  That gets somewhat easier if we just move these to the kms
base class.

Prep work for next patch.
Signed-off-by: NRob Clark <robdclark@gmail.com>

It serves no purpose, things should be sufficiently synchronized already
by atomic framework.  And it is somewhat awkward to be holding a spinlock
when msm_gem_iova() is going to start needing to grab a mutex.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Most, but not all, paths where calling the with struct_mutex held.  The
fast-path in msm_gem_get_iova() (plus some sub-code-paths that only run
the first time) was masking this issue.

So lets just always hold struct_mutex for hw_init().  And sprinkle some
WARN_ON()'s and might_lock() to avoid this sort of problem in the
future.
Signed-off-by: NRob Clark <robdclark@gmail.com>

memptrs->wptr seems to be unused. Remove it to avoid
confusing the upcoming preemption code.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The amount of information that we need to pass into msm_gpu_init()
is steadily increasing, so add a new struct to stabilize the function
call and make it easier to add new configuration down the line.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Modify the 'pad' member of struct drm_msm_gem_info to 'flags'. If the
user sets 'flags' to non-zero it means that they want a IOVA for the
GEM object instead of a mmap() offset. Return the iova in the 'offset'
member.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
[robclark: s/hint/flags in commit msg]
Signed-off-by: NRob Clark <robdclark@gmail.com>

There isn't any generic code that uses ->idle so remove it.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>