Now /proc/sys is described in many places and much information is
redundant.  This patch updates the proc.txt and move the /proc/sys
desciption out to the files in Documentation/sysctls.

Details are:

merge
-  2.1  /proc/sys/fs - File system data
-  2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem
-  2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
with Documentation/sysctls/fs.txt.

remove
-  2.2  /proc/sys/fs/binfmt_misc - Miscellaneous binary formats
since it's not better then the Documentation/binfmt_misc.txt.

merge
-  2.3  /proc/sys/kernel - general kernel parameters
with Documentation/sysctls/kernel.txt

remove
-  2.5  /proc/sys/dev - Device specific parameters
since it's obsolete the sysfs is used now.

remove
-  2.6  /proc/sys/sunrpc - Remote procedure calls
since it's not better then the Documentation/sysctls/sunrpc.txt

move
-  2.7  /proc/sys/net - Networking stuff
-  2.9  Appletalk
-  2.10 IPX
to newly created Documentation/sysctls/net.txt.

remove
-  2.8  /proc/sys/net/ipv4 - IPV4 settings
since it's not better then the Documentation/networking/ip-sysctl.txt.

add
- Chapter 3 Per-Process Parameters
to descibe /proc/<pid>/xxx parameters.
Signed-off-by: NShen Feng <shen@cn.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update Documentation/sysctl/vm.txt and Documentation/filesystems/proc.txt.
 More specifically, the section on /proc/sys/vm in
Documentation/filesystems/proc.txt was removed and a link to
Documentation/sysctl/vm.txt added.

Most of the verbiage from proc.txt was simply moved in vm.txt, with new
addtional text for "swappiness" and "stat_interval".
Signed-off-by: NPeter W Morreale <pmorreale@novell.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NOMMU mmap allocates a piece of memory for an mmap that's rounded up in size to
the nearest power-of-2 number of pages.  Currently it then discards the excess
pages back to the page allocator, making that memory available for use by other
things.  This can, however, cause greater amount of fragmentation.

To counter this, a sysctl is added in order to fine-tune the trimming
behaviour.  The default behaviour remains to trim pages aggressively, while
this can either be disabled completely or set to a higher page-granular
watermark in order to have finer-grained control.

vm region vm_top bits taken from an earlier patch by David Howells.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NMike Frysinger <vapier.adi@gmail.com>

This change introduces two new sysctls to /proc/sys/vm:
dirty_background_bytes and dirty_bytes.

dirty_background_bytes is the counterpart to dirty_background_ratio and
dirty_bytes is the counterpart to dirty_ratio.

With growing memory capacities of individual machines, it's no longer
sufficient to specify dirty thresholds as a percentage of the amount of
dirtyable memory over the entire system.

dirty_background_bytes and dirty_bytes specify quantities of memory, in
bytes, that represent the dirty limits for the entire system.  If either
of these values is set, its value represents the amount of dirty memory
that is needed to commence either background or direct writeback.

When a `bytes' or `ratio' file is written, its counterpart becomes a
function of the written value.  For example, if dirty_bytes is written to
be 8096, 8K of memory is required to commence direct writeback.
dirty_ratio is then functionally equivalent to 8K / the amount of
dirtyable memory:

	dirtyable_memory = free pages + mapped pages + file cache

	dirty_background_bytes = dirty_background_ratio * dirtyable_memory
		-or-
	dirty_background_ratio = dirty_background_bytes / dirtyable_memory

		AND

	dirty_bytes = dirty_ratio * dirtyable_memory
		-or-
	dirty_ratio = dirty_bytes / dirtyable_memory

Only one of dirty_background_bytes and dirty_background_ratio may be
specified at a time, and only one of dirty_bytes and dirty_ratio may be
specified.  When one sysctl is written, the other appears as 0 when read.

The `bytes' files operate on a page size granularity since dirty limits
are compared with ZVC values, which are in page units.

Prior to this change, the minimum dirty_ratio was 5 as implemented by
get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user
written value between 0 and 100.  This restriction is maintained, but
dirty_bytes has a lower limit of only one page.

Also prior to this change, the dirty_background_ratio could not equal or
exceed dirty_ratio.  This restriction is maintained in addition to
restricting dirty_background_bytes.  If either background threshold equals
or exceeds that of the dirty threshold, it is implicitly set to half the
dirty threshold.
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fills in the documentation for all of the current kernel taint
flags, and fixes the number for TAINT_CRAP, which was incorrectly
described.

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We need to add a flag for all code that is in the drivers/staging/
directory to prevent all other kernel developers from worrying about
issues here, and to notify users that the drivers might not be as good
as they are normally used to.

Based on code from Andreas Gruenbacher and Jeff Mahoney to provide a
TAINT flag for the support level of a kernel module in the Novell
enterprise kernel release.

This is the kernel portion of this feature, the ability for the flag to
be set needs to be done in the build process and will happen in a
follow-up patch.

Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: Jeff Mahoney <jeffm@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- s/s/seconds/

- s/10 seconds/60 seconds/

- Mention the zero-disables-it feature.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- s/s/seconds/

- s/10 seconds/60 seconds/

- Mention the zero-disables-it feature.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes a reference to Documentation/kmod.txt
which was apparently renamed to Documentation/debugging-modules.txt
Signed-off-by: NMichael Opdenacker <michael@free-electrons.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Document randomize_va_space and CONFIG_COMPAT_BRK.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Adds a new sysctl, 'oom_dump_tasks', that enables the kernel to produce a
dump of all system tasks (excluding kernel threads) when performing an
OOM-killing.  Information includes pid, uid, tgid, vm size, rss, cpu,
oom_adj score, and name.

This is helpful for determining why there was an OOM condition and which
rogue task caused it.

It is configurable so that large systems, such as those with several
thousand tasks, do not incur a performance penalty associated with dumping
data they may not desire.

If an OOM was triggered as a result of a memory controller, the tasklist
shall be filtered to exclude tasks that are not a member of the same
cgroup.

Cc: Andrea Arcangeli <andrea@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NR_OPEN (historically set to 1024*1024) actually forbids processes to open
more than 1024*1024 handles.

Unfortunatly some production servers hit the not so 'ridiculously high
value' of 1024*1024 file descriptors per process.

Changing NR_OPEN is not considered safe because of vmalloc space potential
exhaust.

This patch introduces a new sysctl (/proc/sys/fs/nr_open) wich defaults to
1024*1024, so that admins can decide to change this limit if their workload
needs it.

[akpm@linux-foundation.org: export it for sparc64]
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add vm.highmem_is_dirtyable toggle

A 32 bit machine with HIGHMEM64 enabled running DCC has an MMAPed file of
approximately 2Gb size which contains a hash format that is written
randomly by the dbclean process.  On 2.6.16 this process took a few
minutes.  With lowmem only accounting of dirty ratios, this takes about 12
hours of 100% disk IO, all random writes.

Include a toggle in /proc/sys/vm/highmem_is_dirtyable which can be set to 1 to
add the highmem back to the total available memory count.

[akpm@linux-foundation.org: Fix the CONFIG_DETECT_SOFTLOCKUP=y build]
Signed-off-by: NBron Gondwana <brong@fastmail.fm>
Cc: Ethan Solomita <solo@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The hugetlb documentation has gotten a bit out of sync with the current code.
Updated the sysctl file to refer to Documentation/vm/hugetlbpage.txt.  Update
that file to contain the current state of affairs (with the newer named sysctl
in place).
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NAdam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

min_free_pages is critical for correctness, document it as such.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a 00-INDEX file to Documentation/sysctl/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: Rob Landley <rob@landley.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Control the trigger limit for softlockup warnings.  This is useful for
debugging softlockups, by lowering the softlockup_thresh to identify
possible softlockups earlier.

This patch:
1. Adds a sysctl softlockup_thresh with valid values of 1-60s
   (Higher value to disable false positives)
2. Changes the softlockup printk to print the cpu softlockup time

[akpm@linux-foundation.org: Fix various warnings and add definition of "two"]
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adds a new sysctl, 'oom_kill_allocating_task', which will automatically kill
the OOM-triggering task instead of scanning through the tasklist to find a
memory-hogging target.  This is helpful for systems with an insanely large
number of tasks where scanning the tasklist significantly degrades
performance.

Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the kernelcore= parameter for x86.

Once all patches are applied, a new command-line parameter exist and a new
sysctl.  This patch adds the necessary documentation.

From: Yasunori Goto <y-goto@jp.fujitsu.com>

  When "kernelcore" boot option is specified, kernel can't boot up on ia64
  because of an infinite loop.  In addition, the parsing code can be handled
  in an architecture-independent manner.

  This patch uses common code to handle the kernelcore= parameter.  It is
  only available to architectures that support arch-independent zone-sizing
  (i.e.  define CONFIG_ARCH_POPULATES_NODE_MAP).  Other architectures will
  ignore the boot parameter.

[bunk@stusta.de: make cmdline_parse_kernelcore() static]
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Poeple keep on adding new numbered sysctls, when they're supposed not to.

Add a documentation file which explain why new sysctls should use
CTL_UNNUMBERED.  The next patch will sprinkle pointers to this throughout
sysctl.c.

Eric provided the text (thanks)

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make zonelist creation policy selectable from sysctl/boot option v6.

This patch makes NUMA's zonelist (of pgdat) order selectable.
Available order are Default(automatic)/ Node-based / Zone-based.

[Default Order]
The kernel selects Node-based or Zone-based order automatically.

[Node-based Order]
This policy treats the locality of memory as the most important parameter.
Zonelist order is created by each zone's locality. This means lower zones
(ex. ZONE_DMA) can be used before higher zone (ex. ZONE_NORMAL) exhausion.
IOW. ZONE_DMA will be in the middle of zonelist.
current 2.6.21 kernel uses this.

Pros.
 * A user can expect local memory as much as possible.
Cons.
 * lower zone will be exhansted before higher zone. This may cause OOM_KILL.

Maybe suitable if ZONE_DMA is relatively big and you never see OOM_KILL
because of ZONE_DMA exhaution and you need the best locality.

(example)
assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL.

*node(0)'s memory allocation order:

 node(0)'s NORMAL -> node(0)'s DMA -> node(1)'s NORMAL.

*node(1)'s memory allocation order:

 node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA.

[Zone-based order]
This policy treats the zone type as the most important parameter.
Zonelist order is created by zone-type order. This means lower zone
never be used bofere higher zone exhaustion.
IOW. ZONE_DMA will be always at the tail of zonelist.

Pros.
 * OOM_KILL(bacause of lower zone) occurs only if the whole zones are exhausted.
Cons.
 * memory locality may not be best.

(example)
assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL.

*node(0)'s memory allocation order:

 node(0)'s NORMAL -> node(1)'s NORMAL -> node(0)'s DMA.

*node(1)'s memory allocation order:

 node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA.

bootoption "numa_zonelist_order=" and proc/sysctl is supporetd.

command:
%echo N > /proc/sys/vm/numa_zonelist_order

Will rebuild zonelist in Node-based order.

command:
%echo Z > /proc/sys/vm/numa_zonelist_order

Will rebuild zonelist in Zone-based order.

Thanks to Lee Schermerhorn, he gives me much help and codes.

[Lee.Schermerhorn@hp.com: add check_highest_zone to build_zonelists_in_zone_order]
[akpm@linux-foundation.org: build fix]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "jesse.barnes@intel.com" <jesse.barnes@intel.com>
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a new security check on mmap operations to see if the user is attempting
to mmap to low area of the address space.  The amount of space protected is
indicated by the new proc tunable /proc/sys/vm/mmap_min_addr and defaults to
0, preserving existing behavior.

This patch uses a new SELinux security class "memprotect."  Policy already
contains a number of allow rules like a_t self:process * (unconfined_t being
one of them) which mean that putting this check in the process class (its
best current fit) would make it useless as all user processes, which we also
want to protect against, would be allowed. By taking the memprotect name of
the new class it will also make it possible for us to move some of the other
memory protect permissions out of 'process' and into the new class next time
we bump the policy version number (which I also think is a good future idea)
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Fix various typos in kernel docs and Kconfigs, 2.6.21-rc4.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Fix the misspellings of "propogate", "writting" and (oh, the shame
:-) "kenrel" in the source tree.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

The current panic_on_oom may not work if there is a process using
cpusets/mempolicy, because other nodes' memory may remain.  But some people
want failover by panic ASAP even if they are used.  This patch makes new
setting for its request.

This is tested on my ia64 box which has 3 nodes.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Ethan Solomita <solo@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add sysctl for kstack_depth_to_print. This lets users change
the amount of raw stack data printed in dump_stack() without
having to reboot.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch fixes typos in various Documentation txts. The patch addresses some
misc words.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

The pipe-a-coredump-to-a-program feature was undocumented.
*Grumble*.

NB: a good enhancement to that patch would be: save all the stuff that a
core file can get from the %x expansions in the environment.
Signed-off-by: NMatthias Urlichs <matthias@urlichs.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently one can enable slab reclaim by setting an explicit option in
/proc/sys/vm/zone_reclaim_mode.  Slab reclaim is then used as a final
option if the freeing of unmapped file backed pages is not enough to free
enough pages to allow a local allocation.

However, that means that the slab can grow excessively and that most memory
of a node may be used by slabs.  We have had a case where a machine with
46GB of memory was using 40-42GB for slab.  Zone reclaim was effective in
dealing with pagecache pages.  However, slab reclaim was only done during
global reclaim (which is a bit rare on NUMA systems).

This patch implements slab reclaim during zone reclaim.  Zone reclaim
occurs if there is a danger of an off node allocation.  At that point we

1. Shrink the per node page cache if the number of pagecache
   pages is more than min_unmapped_ratio percent of pages in a zone.

2. Shrink the slab cache if the number of the nodes reclaimable slab pages
   (patch depends on earlier one that implements that counter)
   are more than min_slab_ratio (a new /proc/sys/vm tunable).

The shrinking of the slab cache is a bit problematic since it is not node
specific.  So we simply calculate what point in the slab we want to reach
(current per node slab use minus the number of pages that neeed to be
allocated) and then repeately run the global reclaim until that is
unsuccessful or we have reached the limit.  I hope we will have zone based
slab reclaim at some point which will make that easier.

The default for the min_slab_ratio is 5%

Also remove the slab option from /proc/sys/vm/zone_reclaim_mode.

[akpm@osdl.org: cleanups]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sergey Vlasov noticed that there is not kernel.suid_dumpable, but
fs.suid_dumpable.

How KERN_SETUID_DUMPABLE ended up in fs_table[]? Hell knows...
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
Acked-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It turns out that it is advantageous to leave a small portion of unmapped file
backed pages if all of a zone's pages (or almost all pages) are allocated and
so the page allocator has to go off-node.

This allows recently used file I/O buffers to stay on the node and
reduces the times that zone reclaim is invoked if file I/O occurs
when we run out of memory in a zone.

The problem is that zone reclaim runs too frequently when the page cache is
used for file I/O (read write and therefore unmapped pages!) alone and we have
almost all pages of the zone allocated.  Zone reclaim may remove 32 unmapped
pages.  File I/O will use these pages for the next read/write requests and the
unmapped pages increase.  After the zone has filled up again zone reclaim will
remove it again after only 32 pages.  This cycle is too inefficient and there
are potentially too many zone reclaim cycles.

With the 1% boundary we may still remove all unmapped pages for file I/O in
zone reclaim pass.  However.  it will take a large number of read and writes
to get back to 1% again where we trigger zone reclaim again.

The zone reclaim 2.6.16/17 does not show this behavior because we have a 30
second timeout.

[akpm@osdl.org: rename the /proc file and the variable]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The zone_reclaim_interval was necessary because we were not able to determine
how many unmapped pages exist in a zone.  Therefore we had to scan in
intervals to figure out if any pages were unmapped.

With the zoned counters and NR_ANON_PAGES we now know the number of pagecache
pages and the number of mapped pages in a zone.  So we can simply skip the
reclaim if there is an insufficient number of unmapped pages.  We use
SWAP_CLUSTER_MAX as the boundary.

Drop all support for /proc/sys/vm/zone_reclaim_interval.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds panic_on_oom sysctl under sys.vm.

When sysctl vm.panic_on_oom = 1, the kernel panics intead of killing rogue
processes.  And if vm.panic_on_oom is 0 the kernel will do oom_kill() in
the same way as it does today.  Of course, the default value is 0 and only
root can modifies it.

In general, oom_killer works well and kill rogue processes.  So the whole
system can survive.  But there are environments where panic is preferable
rather than kill some processes.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently, acpi video options can only be set on kernel command line.  That's
little inflexible; I'd like userland s2ram application that just works, and
modifying kernel command line according to whitelist is not fun.  It is better
to just allow s2ram application to set video options just before suspend
(according to the whitelist).

This implements sysctl to allow setting suspend video options without reboot.

(akpm: Documentation updates for this new sysctl are pending..)
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If large amounts of zone memory are used by empty slabs then zone_reclaim
becomes uneffective.  This patch shakes the slab a bit.

The problem with this patch is that the slab reclaim is not containable to a
zone.  Thus slab reclaim may affect the whole system and be extremely slow.
This also means that we cannot determine how many pages were freed in this
zone.  Thus we need to go off node for at least one allocation.

The functionality is disabled by default.

We could modify the shrinkers to take a zone parameter but that would be quite
invasive.  Better ideas are welcome.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In some situations one may want zone_reclaim to behave differently.  For
example a process writing large amounts of memory will spew unto other nodes
to cache the writes if many pages in a zone become dirty.  This may impact the
performance of processes running on other nodes.

Allowing writes during reclaim puts a stop to that behavior and throttles the
process by restricting the pages to the local zone.

Similarly one may want to contain processes to local memory by enabling
regular swap behavior during zone_reclaim.  Off node memory allocation can
then be controlled through memory policies and cpusets.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently the zone_reclaim code has a fixed window of 30 seconds of off node
allocations should a local zone have no unused pagecache pages left.  Reclaim
will be attempted again after this timeout period to avoid repeated useless
scans for memory.  This is also useful to established sufficiently large off
node allocation chunks to relieve the local node.

It may be beneficial to adjust that time period for some special situations.
For example if memory use was exceeding node capacity one may want to give up
for longer periods of time.  If memory spikes intermittendly then one may want
to shorten the time period to reduce the number of off node allocations.

This patch allows just that....
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

proc support for zone reclaim

This patch creates a proc entry /proc/sys/vm/zone_reclaim_mode that may be
used to override the automatic determination of the zone reclaim made on
bootup.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>