- 23 9月, 2009 11 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
Some archs define MODULED_VADDR/MODULES_END which is not in VMALLOC area. This is handled only in x86-64. This patch make it more generic. And we can use vread/vwrite to access the area. Fix it. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
For /proc/kcore, each arch registers its memory range by kclist_add(). In usual, - range of physical memory - range of vmalloc area - text, etc... are registered but "range of physical memory" has some troubles. It doesn't updated at memory hotplug and it tend to include unnecessary memory holes. Now, /proc/iomem (kernel/resource.c) includes required physical memory range information and it's properly updated at memory hotplug. Then, it's good to avoid using its own code(duplicating information) and to rebuild kclist for physical memory based on /proc/iomem. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
Some 64bit arch has special segment for mapping kernel text. It should be entried to /proc/kcore in addtion to direct-linear-map, vmalloc area. This patch unifies KCORE_TEXT entry scattered under x86 and ia64. I'm not familiar with other archs (mips has its own even after this patch) but range of [_stext ..._end) is a valid area of text and it's not in direct-map area, defining CONFIG_ARCH_PROC_KCORE_TEXT is only a necessary thing to do. Note: I left mips as it is now. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
For /proc/kcore, vmalloc areas are registered per arch. But, all of them registers same range of [VMALLOC_START...VMALLOC_END) This patch unifies them. By this. archs which have no kclist_add() hooks can see vmalloc area correctly. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
Presently, kclist_add() only eats start address and size as its arguments. Considering to make kclist dynamically reconfigulable, it's necessary to know which kclists are for System RAM and which are not. This patch add kclist types as KCORE_RAM KCORE_VMALLOC KCORE_TEXT KCORE_OTHER This "type" is used in a patch following this for detecting KCORE_RAM. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Wessel 提交于
It is desirable to be able to use one early boot device to debug another or to have multiple places you can see the early boot diagnostics, such as the vga screen or serial device. This patch changes the early_printk console device registration to allow more than one early printk device to get registered via register_console(). Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jason Wessel 提交于
Move the dbgp early printk driver in advance of refactoring and adding new code, so the changes to this code are tracked separately from the move of the code. The drivers/usb/early directory will be the location of the current and future early usb code for driving usb devices prior initializing the standard interrupt driven USB drivers. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rusty Russell 提交于
We used to defer it, so lockdep was happy. We now init lockdep early anyway, so just do it after that. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Roland McGrath 提交于
The 32-bit ptrace syscall on a 64-bit kernel (32-bit debugger on 32-bit task) behaves differently than a native 32-bit kernel. When setting a register state of orig_eax>=0 and eax=-ERESTART* when the debugged task is NOT on its way out of a 32-bit syscall, the task will fail to do the syscall restart logic that it should do. Test case available at http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/erestartsys-trap.c?cvsroot=systemtap This happens because the 32-bit ptrace syscall sets eax=0xffffffff when it sets orig_eax>=0. The resuming task will not sign-extend this for the -ERESTART* check because TS_COMPAT is not set. (So the task thinks it is restarting after a 64-bit syscall, not a 32-bit one.) The fix is to have 32-bit ptrace calls set TS_COMPAT when setting orig_eax>=0. This ensures that the 32-bit syscall restart logic will apply when the child resumes. Signed-off-by: NRoland McGrath <roland@redhat.com>
-
由 Roland McGrath 提交于
The high 32 bits of orig_ax will be ignored when it matters, so don't fiddle them when setting it. Signed-off-by: NRoland McGrath <roland@redhat.com>
-
由 Roland McGrath 提交于
Make syscall_get_nr() return int, so we always sign-extend the low 32 bits of orig_ax in checks. Signed-off-by: NRoland McGrath <roland@redhat.com>
-
- 22 9月, 2009 3 次提交
-
-
由 Jan Beulich 提交于
Since alloc_bootmem() will never return inaccessible (via virtual addressing) memory anyway, using the ..._low() variant only makes sense when the physical address range of the allocated memory must fulfill further constraints, espacially since on 64-bits (or more generally in all cases where the pools the two variants allocate from are than the full available range. Probably the use in alloc_tce_table() could also be eliminated (based on code inspection of pci-calgary_64.c), but that seems too risky given I know nothing about that hardware and have no way to test it. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Beulich 提交于
Sizing of memory allocations shouldn't depend on the number of physical pages found in a system, as that generally includes (perhaps a huge amount of) non-RAM pages. The amount of what actually is usable as storage should instead be used as a basis here. Some of the calculations (i.e. those not intending to use high memory) should likely even use (totalram_pages - totalhigh_pages). Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Dave Airlie <airlied@linux.ie> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Commit 96177299 ("Drop free_pages()") modified nr_free_pages() to return 'unsigned long' instead of 'unsigned int'. This made the casts to 'unsigned long' in most callers superfluous, so remove them. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Acked-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <zankel@tensilica.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 9月, 2009 14 次提交
-
-
由 Michael Tokarev 提交于
This trivial patch fixes one missing space in printk. I already fixed it about half a year ago or more, but the change (in arch/x86/kernel/cpu/smpboot.c at that time) didn't made into mainline yet. Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru> index 28e5f59..6c139ed 100644 Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Ingo Molnar 提交于
- provide compatibility Kconfig entry for existing PERF_COUNTERS .config's - provide courtesy copy of old perf_counter.h, for user-space projects - small indentation fixups - fix up MAINTAINERS - fix small x86 printout fallout - fix up small PowerPC comment fallout (use 'counter' as in register) Reviewed-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: NStephane Eranian <eranian@google.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NPaul Mackerras <paulus@samba.org> Reviewed-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
In preparation to the renames, to avoid a namespace clash. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alok Kataria 提交于
On an AMD-64 system the processor frequency that is printed during system boot, may be different than the tsc frequency that was returned by the hypervisor, due to the value returned from calibrate_cpu. For debugging timekeeping or other related issues it might be better to get the tsc_khz value returned by the hypervisor. The patch below now prints the tsc frequency that the VMware hypervisor returned. Signed-off-by: NAlok N Kataria <akataria@vmware.com> LKML-Reference: <1252095219.12518.13.camel@ank32.eng.vmware.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
While these don't get actively used (afaict), it still doesn't hurt for them to properly reflect what how respective segments will get mapped/ accessed. Signed-off-by: NJan Beulich <jbeulich@novell.com> LKML-Reference: <4AA0E95F0200007800013707@vpn.id2.novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Add missing annotations, and make use of include/linux/init.h's macros. Signed-off-by: NJan Beulich <jbeulich@novell.com> LKML-Reference: <4AA0E8F60200007800013703@vpn.id2.novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
On one of my systems, several thousand iterations are needed before CMD_RESET can be observed clear after setting it. Using a much higher value here obviously cannot hurt. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> LKML-Reference: <4AA0E85D02000078000136F9@vpn.id2.novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sergey Senozhatsky 提交于
Trivial: correct "that the we don't" typo. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> LKML-Reference: <20090917125401.GU3717@localdomain.by> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Felipe Contreras 提交于
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alok N Kataria <akataria@vmware.com> Cc: "Tan Wei Chong" <wei.chong.tan@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Bob Moore <robert.moore@intel.com> LKML-Reference: <1253137123-18047-2-git-send-email-felipe.contreras@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
In case of discrete (pretty old) apics we may have cpu_has_apic bit not set but have to check if smp_found_config (MP spec) is there and apic was not disabled. Also don't forget to print apic/io-apic for such case as well. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20090915071230.GA10604@lenovo> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Huang Weiyi 提交于
Remove duplicated #include in: arch/x86/kernel/cpu/common.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Perches 提交于
Perhaps this is a more readable/standard form. Signed-off-by: NJoe Perches <joe@perches.com> LKML-Reference: <1252945687.3937.14.camel@Joe-Laptop.home> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Dave noticed that we leak the PMU resource reservations when we fail the hardware counter init. Reported-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NDavid Miller <davem@davemloft.net> LKML-Reference: <1252483487.7746.164.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 9月, 2009 7 次提交
-
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/x86/kernel/cpu/common.c: linux/smp.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1252087783.6385.10.camel@ht.satnam>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/x86/mm/kmemcheck/shadow.c: linux/module.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247065179.4382.51.camel@ht.satnam>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/x86/kernel/traps.c: asm/traps.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247065094.4382.49.camel@ht.satnam>
-
由 Kay Sievers 提交于
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yinghai Lu 提交于
After close looking, commit 8126dec3 will break: 1. some cpu feature in early stage too, like cpu_has_x2apic 2. will break built-in-command line 3. will break other memmap= and mem= 4. early_dbgp and early_console that will use early_ioremap to access mmio (?) So revert it. Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>, Cc: Linus Torvalds <torvalds@linux-foundation.org>, Cc: Andrew Morton <akpm@linux-foundation.org>, LKML-Reference: <4AB51DFD.2000904@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andreas Herrmann 提交于
Fix following compile warning: arch/x86/kernel/cpu/mcheck/mce_amd.c: In function 'threshold_create_bank': arch/x86/kernel/cpu/mcheck/mce_amd.c:492: warning: unused variable 'c' which shows up when kernel is compiled with CONFIG_SMP=n. Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20090915151727.GB21670@alberich.amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arjan van de Ven 提交于
The "end of a C state" trace point currently happens before the code runs that corrects the TSC for having stopped during idle. The result of this is that the timestamp of the end-of-C-state event is garbage on cpus where the TSC stops during idle. This patch moves the end point of the C state to after the timekeeping engine of the kernel has been corrected. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090919133533.139c2a46@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 9月, 2009 3 次提交
-
-
由 Arjan van de Ven 提交于
This patch converts the existing power tracer into an event tracer, so that power events (C states and frequency changes) can be tracked via "perf". This also removes the perl script that was used to demo the tracer; its functionality is being replaced entirely with timechart. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130542.6d314860@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
On Intel platforms, we can use logical flat mode if there are <= 8 logical cpu's (irrespective of physical apic id values). This will enable simplified and efficient IPI and device interrupt routing on such platforms. Fix the relevant comments while we are at it. We can clean up default_setup_apic_routing() by using apic->probe() but that is a different item. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: "yinghai@kernel.org" <yinghai@kernel.org> LKML-Reference: <1253327399.3948.747.camel@sbs-t61.sc.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Markus Metzger 提交于
Draining the BTS buffer on a buffer overflow interrupt takes too long resulting in a kernel lockup when tracing the kernel. Restructure perf_counter sampling into sample creation and sample output. Prepare a single reference sample for BTS sampling and update the from and to address fields when draining the BTS buffer. Drain the entire BTS buffer between a single perf_output_begin() / perf_output_end() pair. Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090915130023.A16204@sedona.ch.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 9月, 2009 2 次提交
-
-
由 Jack Steiner 提交于
UV depends on the MMRHI space being identity mapped. The patch: x86: Make 64-bit efi_ioremap use ioremap on MMIO regions changed this to make efi regions at a different address using ioremap. Add the identity mapping to uv_system_init. ( Note this code was previously present but was deleted when BIOS added the ranges to the EFI map - previous efi code identify mapped the ranges. ) Signed-off-by: NJack Steiner <steiner@sgi.com> LKML-Reference: <20090909154339.GA7946@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jack Steiner 提交于
Add volatile-semantics to the SGI UV read/write macros that are used to access chipset memory mapped registers. No direct references to volatile are made. Instead the readq/writeq macros are used. Signed-off-by: NJack Steiner <steiner@sgi.com> Cc: linux-mm@kvack.org Cc: dwalker@fifo99.com Cc: cfriesen@nortel.com LKML-Reference: <20090910143149.GA14273@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-