- 09 2月, 2007 6 次提交
-
-
由 Artem Bityutskiy 提交于
Add more comment to OOB I/O interface. Read/write are not symmetric which is confusing and should be documented. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Artem Bityutskiy 提交于
Remove unused and broken mtd->ecctype and mtd->eccsize fields from struct mtd_info. Do not remove them from userspace API data structures (don't want to breake userspace) but mark them as obsolete by a comment. Any userspace program which uses them should be half-broken anyway, so this is more about saving data structure size. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Artem Bityutskiy 提交于
Remove ugly and weird MTD_PROGREGION_CTRLMODE_VALID() and MTD_PROGREGION_CTRLMODE_INVALID() macros. There is only one user of them and they are used locally just for printing. Anyway, this patch is a preparation for removing mtd->ecctype and mtd->eccsize, but these macros use them. Fix this. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Stefan Roese 提交于
This patch adds support for 64 bit resources enabled via the CONFIG_RESOURCES_64BIT option. Now a 64 bit can be passed to the physmap driver. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Haavard Skinnemoen 提交于
Replace the inclusion of linux/mtd/map.h with a forward-declaration of struct map_info. This allows linux/mtd/physmap.h to be included by e.g. board code even if the MTD subsystem is disabled. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Randy Dunlap 提交于
Fixes kernel-doc warning in mtd/nand.h. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
- 07 2月, 2007 1 次提交
-
-
由 Kyungmin Park 提交于
Provide the bad block scan with its own read function so that important error messages that are not from the the bad block scan, can always be printed. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 03 2月, 2007 1 次提交
-
-
由 Alan 提交于
> Looks like you should use ata_busy_wait() here, rather than reproducing > the same code again. It waits in 10uS chunks while 1uS chunks were used in the workaround. Could indeed do that once I know the fix is right. While I'm at it the ata_busy_wait kerneldoc is borked so here's a fix Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 02 2月, 2007 2 次提交
-
-
由 Kyungmin Park 提交于
It use blockpage instead of a pair (block, page). It can also cover a small chunk access. 0x00, 0x20, 0x40 and so on. And in JFFS2 behavior, sometimes it reads two pages alternatively. e.g., It first reads A page, B page and A page. So we check another bufferram to find requested page. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> -
由 Al Viro 提交于
fix the extern in efi.h Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 1月, 2007 7 次提交
-
-
由 Kyungmin Park 提交于
- Remove unused fields - Fix typo Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> -
由 Serge E. Hallyn 提交于
This is based on a patch by Eric W. Biederman, who pointed out that pid namespaces are still fake, and we only have one ever active. So for the time being, we can modify any code which could access tsk->nsproxy->pid_ns during task exit to just use &init_pid_ns instead, and move the exit_task_namespaces call in do_exit() back above exit_notify(), so that an exiting nfs server has a valid tsk->sighand to work with. Long term, pulling pid_ns out of nsproxy might be the cleanest solution. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> [ Eric's patch fixed to take care of free_pid() too ] Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit 7a238fcb in preparation for a better and simpler fix proposed by Eric Biederman (and fixed up by Serge Hallyn) Acked-by: NSerge E. Hallyn <serue@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Engelhardt 提交于
Apparently this broke due to missing `struct inode' declaration. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Cc: Noah Watkins <nwatkins@ittc.ku.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
Use __u8 rather than u8 in SIZE defines exported to userspace. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
Make sure exported I2O ioctls utilize userspace safe types. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Serge E. Hallyn 提交于
Fix exit race by splitting the nsproxy putting into two pieces. First piece reduces the nsproxy refcount. If we dropped the last reference, then it puts the mnt_ns, and returns the nsproxy as a hint to the caller. Else it returns NULL. The second piece of exiting task namespaces sets tsk->nsproxy to NULL, and drops the references to other namespaces and frees the nsproxy only if an nsproxy was passed in. A little awkward and should probably be reworked, but hopefully it fixes the NFS oops. Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Daniel Hokka Zakrisson <daniel@hozac.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 1月, 2007 1 次提交
-
-
由 Jiri Kosina 提交于
The apple powerbook people are used to switch the pb_fnmode setting at runtime through writing to sysfs, altering the module parameter value. This was broken for them in 2.6.20-rc1 when generic HID layer was introduced, as the pb_fnmode flag was made per-hiddevice, instead of global variable. This patch moves the pb_fnmode module parameter from usbhid module to hid module, but apart from that retains backward compatibility with respect to changing the mode through sysfs. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 1月, 2007 1 次提交
-
-
由 Dave Jones 提交于
Culled from the VIA codedrop. Also fixes up one ID used in amd64-agp to use the VIA part number instead of the board name in its ID. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 27 1月, 2007 8 次提交
-
-
由 Josepch Chan 提交于
This patch: * Corrects the wrong device ID of PCI_DEVICE_ID_VIA_SATA_EIDE from 0x0581 to 0x5324. * Adds VIA CX700 and VT8237S support in drivers/ide/pci/via82cxxx.c * Adds VIA VT8237S support in drivers/ata/pata_via.c Signed-off-by: NJosepch Chan <josephchan@via.com.tw> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 NeilBrown 提交于
If a GFP_KERNEL allocation is attempted in md while the mddev_lock is held, it is possible for a deadlock to eventuate. This happens if the array was marked 'clean', and the memalloc triggers a write-out to the md device. For the writeout to succeed, the array must be marked 'dirty', and that requires getting the mddev_lock. So, before attempting a GFP_KERNEL allocation while holding the lock, make sure the array is marked 'dirty' (unless it is currently read-only). Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
nfsd defines a type 'encode_dent_fn' which is much like 'filldir_t' except that the first pointer is 'struct readdir_cd *' rather than 'void *'. It then casts encode_dent_fn points to 'filldir_t' as needed. This hides any other type mismatches between the two such as the fact that the 'ino' arg recently changed from ino_t to u64. So: get rid of 'encode_dent_fn', get rid of the cast of the function type, change the first arg of various functions from 'struct readdir_cd *' to 'void *', and live with the fact that we have a little less type checking on the calling of these functions now. Less internal (to nfsd) checking offset by more external checking, which is more important. Thanks to Gabriel Paubert <paubert@iram.es> for discovering this and providing an initial patch. Signed-off-by: NGabriel Paubert <paubert@iram.es> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert P. J. Day 提交于
Fix a number of kernel-doc entries for header files in include/linux by making sure they begin with the appropriate '/**' notation and use @var notation. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
A couple of the warnings will be followed by an Oops if they ever fire, so may as well be BUG_ON. Another isn't obviously fatal but has never been known to fire, so make it a WARN_ON. Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
NFSd assumes that largest number of pages that will be needed for a request+response is 2+N where N pages is the size of the largest permitted read/write request. The '2' are 1 for the non-data part of the request, and 1 for the non-data part of the reply. However, when a read request is not page-aligned, and we choose to use ->sendfile to send it directly from the page cache, we may need N+1 pages to hold the whole reply. This can overflow and array and cause an Oops. This patch increases size of the array for holding pages by one and makes sure that entry is NULL when it is not in use. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
This patch adds the VM_ALWAYSDUMP flag for vm_flags in vm_area_struct. This provides a clean explicit way to have a vma always included in core dumps, as is needed for vDSO's. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joerg Roedel 提交于
This patch implements forwarding of SHUTDOWN intercepts from the guest on to userspace on AMD SVM. A SHUTDOWN event occurs when the guest produces a triple fault (e.g. on reboot). This also fixes the bug that a guest reboot actually causes a host reboot under some circumstances. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 1月, 2007 1 次提交
-
-
由 Tejun Heo 提交于
Some uli controllers have stuck SIMPLEX bit which can't be cleared with ata_pci_clear_simplex(), but the controller is capable of doing DMAs on both channels simultaneously. Implement ATA_FLAG_IGN_SIMPLEX which makes libata ignore the simplex bit and use it in sata_uli. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 25 1月, 2007 3 次提交
-
-
由 Alan 提交于
When set_mode() changed ->set_mode didn't adapt. This makes the needed changes and removes the relevant FIXME case. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Trond Myklebust 提交于
Prevent the call to invalidate_inode_pages2() from racing with file writes by taking the inode->i_mutex across the page cache flush and invalidate. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
Fix the Oops in http://bugzilla.linux-nfs.org/show_bug.cgi?id=138 We shouldn't be calling rpc_release_task() for tasks that are not active. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 1月, 2007 5 次提交
-
-
由 Brian King 提交于
Initialize qc->pad_len for each new command. This ensures that pad_len is not set to a stale value for zero data length commands. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brian King 提交于
Fixup the inialization of qc->n_elem. It currently gets initialized to 1 for commands that do not transfer any data. Fix this by initializing n_elem to 0 and only setting to 1 in ata_scsi_qc_new when there is data to transfer. This fixes some problems seen with SATA devices attached to ipr adapters. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Masahide NAKAMURA 提交于
include/linux/if_tunnel.h is broken for user application because it was changed to use __be32 which is required to include linux/types.h in advance but didn't. (This issue is found when building MIPL2 daemon. We are not sure this is the last header to be fixed about __be32.) Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NTAKAMIYA Noriaki <takamiya@po.ntts.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
After commit d3dcc077, include/linux/if_{addr,link}.h should be processed with unifdef. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
With the introduction of x_tables we accidentally broke compatibility by defining IPT_TABLE_MAXNAMELEN to XT_FUNCTION_MAXNAMELEN instead of XT_TABLE_MAXNAMELEN, which is two bytes larger. On most architectures it doesn't really matter since we don't have any tables with names that long in the kernel and the structure layout didn't change because of alignment requirements of following members. On CRIS however (and other architectures that don't align data) this changed the structure layout and thus broke compatibility with old iptables binaries. Changing it back will break compatibility with binaries compiled against recent kernels again, but since the breakage has only been there for three releases this seems like the better choice. Spotted by Jonas Berlin <xkr47@outerspace.dyndns.org>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2007 2 次提交
-
-
由 Vladimir Saveliev 提交于
This patch fixes a confusion reiserfs has for a long time. On release file operation reiserfs used to try to pack file data stored in last incomplete page of some files into metadata blocks. After packing the page got cleared with clear_page_dirty. It did not take into account that the page may be mmaped into other process's address space. Recent replacement for clear_page_dirty cancel_dirty_page found the confusion with sanity check that page has to be not mapped. The patch fixes the confusion by making reiserfs avoid tail packing if an inode was ever mmapped. reiserfs_mmap and reiserfs_file_release are serialized with mutex in reiserfs specific inode. reiserfs_mmap locks the mutex and sets a bit in reiserfs specific inode flags. reiserfs_file_release checks the bit having the mutex locked. If bit is set - tail packing is avoided. This eliminates a possibility that mmapped page gets cancel_page_dirty-ed. Signed-off-by: NVladimir Saveliev <vs@namesys.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
This patch removes some more ftape code. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 22 1月, 2007 1 次提交
-
-
由 Simon Budig 提交于
This trivial change adds some missing enum values to the hid-debug output. Signed-off-by: NSimon Budig <simon@budig.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 1月, 2007 1 次提交
-
-
由 Tejun Heo 提交于
libata didn't used to init qc->dma_dir to any specific value on qc initialization and command translation path didn't set qc->dma_dir if the command doesn't need data transfer. This made non-data commands to have random qc->dma_dir. This usually doesn't cause problem because LLDs usually check qc->protocol first and look at qc->dma_dir iff the command needs data transfer but this doesn't hold for all LLDs. It might be worthwhile to rename qc->dma_dir to qc->data_dir as we use the field to tag data direction for both PIO and DMA protocols. This problem has been spotted by James Bottomley. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-