1. 27 8月, 2005 10 次提交
  2. 26 8月, 2005 1 次提交
    • M
      [TG3]: Fix ethtool loopback test lockup · d4ef1608
      Michael Chan 提交于
      The tg3_abort_hw() call in tg3_test_loopback() is causing lockups on
      some devices. tg3_abort_hw() disables the memory arbiter, causing
      tg3_reset_hw() to hang when it tries to write the pre-reset signature.
      tg3_abort_hw() should only be called after the pre-reset signature has
      been written. This is all done in tg3_reset_hw() so the tg3_abort_hw()
      call is unnecessary and can be removed.
      
      [ Also bump driver version and release date. -DaveM ]
      Signed-off-by: NMichael Chan <mchan@broadcom.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d4ef1608
  3. 25 8月, 2005 1 次提交
    • J
      [PATCH] cfq-iosched.c: minor fixes · 9c2c38a1
      Jens Axboe 提交于
      One critical fix and two minor fixes for 2.6.13-rc7:
      
      - Max depth must currently be 2 to allow barriers to function on SCSI
      - Prefer sync request over async in choosing the next request
      - Never allow async request to preempt or disturb the "anticipation" for
        a single cfq process context. This is as-designed, the code right now
        is buggy in that area.
      Signed-off-by: NJens Axboe <axboe@suse.de>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      9c2c38a1
  4. 24 8月, 2005 24 次提交
  5. 23 8月, 2005 1 次提交
  6. 20 8月, 2005 2 次提交
    • D
      [TG3]: Update driver version and reldate. · 034ea638
      David S. Miller 提交于
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      034ea638
    • M
      [TG3]: Fix SerDes detection · da6b2d01
      Michael Chan 提交于
      A problem was reported by Grant Grundler on an HP rx8620 using IOX
      Core LAN partno(A7109-6) 5701 copper NIC. The tg3 driver mistakenly
      detects this NIC as having a SerDes PHY and link does not come up as a
      result.
      
      The problem was caused by an incorrectly programmed eeprom that set the
      NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER bit in the NIC_SRAM_DATA_CFG location.
      
      This patch will override the NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER bit if a
      valid PHY ID is read from the MII registers on older 570x chips where
      the MII interface is not used on SerDes chips. On newer chips such as
      the 5780 that use MII for both copper and SerDes, SerDes detection must
      rely on the eeprom.
      
      This patch will make the SerDes detection identical to versions 3.25 and
      older.
      Signed-off-by: NMichael Chan <mchan@broadcom.com>
      Acked-by: NGrant Grundler <iod00d@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      da6b2d01
  7. 19 8月, 2005 1 次提交