Currently, if the --jitter flag specifies jitter for a --build-only
run, the system will obediently build a kernel, refuse to launch it,
launch the requested number of jitter processes, and wait for the
specified kernel run time, which defaults to 30 minutes.  This is
of course quite pointless.

This commit therefore disables jitter on build-only runs.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit enables jitter by default.  It may be manually disabled
by passing "--jitter 0" to kvm.sh.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds a --jitter OS-jitter capability to expose bugs based
on no-delay assumptions.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit converts test duration from minutes to seconds early on
in order to prepare for upcoming OS-jitter-injection changes.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds the scripting changes to add support for the shiny
new rcuperf kernel module.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The default test grace period of two minutes is insufficient in some
cases and excessive in others.  This commit therefore increases the
default to three minutes, but also adds a --shutdown-grace parameter
to allow the default to be overridden.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Currently, the scripts print "----Start batch" at the beginning of each
batch, which does serve as a good visual delimiter between batches.
Unfortunately, if there are a lot of batches, it is hard to quickly
estimate test runtime from the output of "--dryrun sched".  This commit
therefore adds a batch number, so that the beginning-of-batch output
looks like this "----Start batch 10" for the tenth batch.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit allows --bootarg instead of --bootargs, --config instead of
--configs, and --qemu-arg instead of --qemu-args.  For those cases where
a native English speaker might auto-correct the argument to be incorrect.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Although it is currently possible to run the same test in parallel,
'--config "TINY01 TINY01 TINY01"' can get a bit verbose, especially
if you want to run 48 instances of TINY01 in parallel.  This commit
therefore allows prefixing the Kconfig fragment with a repeat count,
for example, '--config "48*TINY01"' to run 48 instances in parallel.
At least assuming that you have 48 CPUs and also gave '--cpus 48'.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Parentheses are special to bash, so use an overflow flag that doesn't
use them.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Now that we have removed configs based on kernel version, we can also remove the
kversion parameter in kvm.sh.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Setting CONFIG_MAXSMP=y causes cpumasks to be moved offstack, which
introduces the possibility of NULL cpumask_var_t pointers.  This commit
therefore enables CONFIG_MAXSMP=y in TREE01 to increase test coverage.
However, because CONFIG_MAXSMP=y implies 8192 CPUs, we need to use
the maxcpus= boot parameter to limit the number of CPUs to something
reasonable, which in turn requires updating the scripts to handle this.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NPranith Kumar <bobby.prani@gmail.com>

This commit sets the executable bit on test scripts config2frag.sh
and kvm.sh.  Since #!/bin/bash is set in all the scripts, this commit
also drops it from all usage lines because the scripts can now all be
invoked directly.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Some of the scripts encode a default /bin/sh shell. On systems which use
dash as default shell, these scripts fail as they are bash scripts. I
encountered this while testing the sprintf() changes on a Debian system
where dash is the default shell.

This commit changes all such uses to use bash explicitly.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Currently the post-processing complains about the lack of rcutorture
output when --buildonly is set and also emits misleading messages about
kernels being started and finishing.  This commit suppresses these
complaints and messages.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The current scripting only keeps track of the git SHA-1 of the current
HEAD.  This can cause confusion in cases where testing ran in a git
tree where changes had not yet been checked in.  This commit therefore
also records the output of "git diff HEAD" to provide the information
needed to reconstruct the source tree that was tested.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Currently, the scripts hard-code arch/x86/boot/bzImage, which does not
work well for other architectures.  This commit therefore provides a
identify_boot_image function that selects the correct bzImage location
relative to the top of the Linux source tree.  This commit also adds a
--bootimage argument that allows selecting some other file, for example,
"vmlinux".

This change requires that the definition of the QEMU variable be
computed earlier in order to identify where to look for the boot image
when it comes time to copy it to the results directory.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit applies quotes to permit multi-word --qemu-args and
--bootargs arguments.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

In a normal torture-test run, the script inherits its environment
variables, but this does not work when producing a script that is
to run later.  Therefore, definitions and exports are prepended to
a dryrun script but not to a script that is run immediately.  This
commit reconciles this by placing definitions and exports at the
beginning of the script in both cases.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Conflicts:
	tools/testing/selftests/rcutorture/bin/kvm.sh

The scripts produced by kvm.sh's "--dryrun script" argument were intended
for debugging rather than to run, but it is easier to debug if the script
output matches exactly what is run.  This commit therefore makes this
script runnable.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the torture scripts a bit more RCU-independent.
It also removes a redundant export of this same shell variable.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the torture scripts a bit more RCU-independent.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the torture scripts a bit more RCU-independent.
It also drops an redundant "export" statement.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the torture scripts a bit more RCU-independent.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the torture scripts a bit more RCU-independent by
changing RCU_BUILDONLY to TORTURE_BUILDONLY.  It also removes an
unnecessary export command.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the torture scripts a bit more RCU-independent.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the torture scripts a bit more RCU-independent by
changing RCU_KMAKE_ARG to TORTURE_KMAKE_ARG.  It also removes the
unnecessary export command.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Some environments require some variation on "make defconfig" to initialize
the .config file.  This commit therefore adds a --defconfig argument to
allow this to be specified.  The default value is of course "defconfig".
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the torture scripts a bit more RCU-independent.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit makes the output of "--dryrun sched" more user-friendly,
clearly indicating the batch starts.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

The --builddir and --relbuilddir options were initially intended to handle
parallel tests.  However, since commit 43e38ab3 (Enable concurrent
rcutorture runs), the script manages multiple build directories as
needed for parallel testing.  This commit therefore removes these two
obsolete options.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit logs the progress text that kvm.sh outputs, improving
after-the-fact troubleshooting.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

The output of each kvm-test-1-run.sh script is placed into a file
whose name parallels that of the build directory.  This means that
the kvm-test-1-run.sh output is overwritten by later run.  This
commit therefore places the kvm-test-1-run.sh output into the
per-test-case directory in the "res" hierarchy.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit adds a trivial set of configuration files for lock
torturing.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit uses the standard software ploy of introducing another
level of indirection below the configs directory.  This allows each
torture-test suite to have its own set of Kconfig files, boot parameters,
and version-specific scripts.  Initially, we have only rcu, but lock
will follow soonish.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

The kvm-test-1-rcu.sh is not specific to RCU, so this commit renames it
to kvm-test-1-run.sh.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit prevents the results directory from being created for
dryruns.  However, a script generated from a dryrun will create
the results directory should it be run.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit adds a "(!)" flag after the number of CPUs required by a
given test if that test requires more than the available number of CPUs.
Note that these flags appear only when the number of CPUs is specified
using the --cpus argument.  In the absence of a --cpus argument, no
tests are flagged.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>