- 21 3月, 2008 2 次提交
-
-
由 Daniel Lezcano 提交于
Make the proc for tcp6 to be per namespace. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
This patch, like udp proc, makes the proc functions to take care of which namespace the socket belongs. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2008 1 次提交
-
-
由 Glenn Griffin 提交于
Updated to incorporate Eric's suggestion of using a per cpu buffer rather than allocating on the stack. Just a two line change, but will resend in it's entirety. Signed-off-by: NGlenn Griffin <ggriffin.kernel@gmail.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 01 3月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
struct net_proto_family* is not used in icmp[v6]_init, ndisc_init, igmp_init and tcp_v4_init. Remove it. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 13 次提交
-
-
由 Ilpo Järvinen 提交于
net/ipv4/tcp_cong.c: tcp_reno_cong_avoid | -65 1 function changed, 65 bytes removed, diff: -65 net/ipv4/arp.c: arp_ignore | -5 1 function changed, 5 bytes removed, diff: -5 net/ipv4/tcp_bic.c: bictcp_cong_avoid | -57 1 function changed, 57 bytes removed, diff: -57 net/ipv4/tcp_cubic.c: bictcp_cong_avoid | -61 1 function changed, 61 bytes removed, diff: -61 net/ipv4/tcp_highspeed.c: hstcp_cong_avoid | -63 1 function changed, 63 bytes removed, diff: -63 net/ipv4/tcp_hybla.c: hybla_cong_avoid | -85 1 function changed, 85 bytes removed, diff: -85 net/ipv4/tcp_htcp.c: htcp_cong_avoid | -57 1 function changed, 57 bytes removed, diff: -57 net/ipv4/tcp_veno.c: tcp_veno_cong_avoid | -52 1 function changed, 52 bytes removed, diff: -52 net/ipv4/tcp_scalable.c: tcp_scalable_cong_avoid | -61 1 function changed, 61 bytes removed, diff: -61 net/ipv4/tcp_yeah.c: tcp_yeah_cong_avoid | -75 1 function changed, 75 bytes removed, diff: -75 net/ipv4/tcp_illinois.c: tcp_illinois_cong_avoid | -54 1 function changed, 54 bytes removed, diff: -54 net/dccp/ccids/ccid3.c: ccid3_update_send_interval | -7 ccid3_hc_tx_packet_recv | +7 2 functions changed, 7 bytes added, 7 bytes removed, diff: +0 net/ipv4/tcp_cong.c: tcp_is_cwnd_limited | +88 1 function changed, 88 bytes added, diff: +88 built-in.o: 14 functions changed, 95 bytes added, 642 bytes removed, diff: -547 ...Again some gcc artifacts visible as well. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
net/ipv4/tcp.c: tcp_close_state | -226 tcp_done | -145 tcp_close | -564 tcp_disconnect | -141 4 functions changed, 1076 bytes removed, diff: -1076 net/ipv4/tcp_input.c: tcp_fin | -86 tcp_rcv_state_process | -164 2 functions changed, 250 bytes removed, diff: -250 net/ipv4/tcp_ipv4.c: tcp_v4_connect | -209 1 function changed, 209 bytes removed, diff: -209 net/ipv4/arp.c: arp_ignore | +5 1 function changed, 5 bytes added, diff: +5 net/ipv6/tcp_ipv6.c: tcp_v6_connect | -158 1 function changed, 158 bytes removed, diff: -158 net/sunrpc/xprtsock.c: xs_sendpages | -2 1 function changed, 2 bytes removed, diff: -2 net/dccp/ccids/ccid3.c: ccid3_update_send_interval | +7 1 function changed, 7 bytes added, diff: +7 net/ipv4/tcp.c: tcp_set_state | +238 1 function changed, 238 bytes added, diff: +238 built-in.o: 12 functions changed, 250 bytes added, 1695 bytes removed, diff: -1445 I've no explanation why some unrelated changes seem to occur consistently as well (arp_ignore, ccid3_update_send_interval; I checked the arp_ignore asm and it seems to be due to some reordered of operation order causing some extra opcodes to be generated). Still, the benefits are pretty obvious from the codiff's results. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
The snd_up check should be enough. I suspect this has been there to provide a minor optimization in clean_rtx_queue which used to have a small if (!->sacked) block which could skip snd_up check among the other work. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hideo Aoki 提交于
This patch introduces new memory accounting functions for each network protocol. Most of them are renamed from memory accounting functions for stream protocols. At the same time, some stream memory accounting functions are removed since other functions do same thing. Renaming: sk_stream_free_skb() -> sk_wmem_free_skb() __sk_stream_mem_reclaim() -> __sk_mem_reclaim() sk_stream_mem_reclaim() -> sk_mem_reclaim() sk_stream_mem_schedule -> __sk_mem_schedule() sk_stream_pages() -> sk_mem_pages() sk_stream_rmem_schedule() -> sk_rmem_schedule() sk_stream_wmem_schedule() -> sk_wmem_schedule() sk_charge_skb() -> sk_mem_charge() Removeing sk_stream_rfree(): consolidates into sock_rfree() sk_stream_set_owner_r(): consolidates into skb_set_owner_r() sk_stream_mem_schedule() The following functions are added. sk_has_account(): check if the protocol supports accounting sk_mem_uncharge(): do the opposite of sk_mem_charge() In addition, to achieve consolidation, updating sk_wmem_queued is removed from sk_mem_charge(). Next, to consolidate memory accounting functions, this patch adds memory accounting calls to network core functions. Moreover, present memory accounting call is renamed to new accounting call. Finally we replace present memory accounting calls with new interface in TCP and SCTP. Signed-off-by: NTakahiro Yasui <tyasui@redhat.com> Signed-off-by: NHideo Aoki <haoki@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Several length variables cannot be negative, so convert int to unsigned int. This also allows us to do sane shift operations on those variables. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Pointing to the next skb is necessary to avoid referencing already SACKed skbs which will soon be on a separate list. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Better place exists in update_send_head (other non-queue related adjustments are done there as well) which is the only caller of tcp_advance_send_head (now that the bogus call from mtu_probe is gone). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
It is going to replace the sack fastpath hint quite soon... :-) Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
Support for network splice receive. Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2007 1 次提交
-
-
由 Ilpo Jrvinen 提交于
When the abstraction functions got added, conversion here was made incorrectly. As a result, the skb may end up pointing to skb which got included to the probe skb and then was freed. For it to trigger, however, skb_transmit must fail sending as well. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 10月, 2007 1 次提交
-
-
由 Chuck Lever 提交于
The tcp_minshall_update() function is called in exactly one place, and is passed an unsigned integer for the mss_len argument. Make the sign of the argument match the sign of the passed variable in order to eliminate an unneeded implicit type cast and a mixed sign comparison in tcp_minshall_update(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2007 13 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
There's no reason to clear the sacktag skb hint when small part of the rexmit queue changes. Account changes (if any) instead when fragmenting/collapsing. RTO/FRTO do not touch SACKED_ACKED bits so no need to discard SACK tag hint at all. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
In addition, fix its function comment spacing. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Makes caller side more obvious, there's no need to have a wrapper for this oneliner! Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Previously code had IsReno/IsFack defined as macros that were local to tcp_input.c though sack_ok field has user elsewhere too for the same purpose. This changes them to static inlines as preferred according the current coding style and unifies the access to sack_ok across multiple files. Magic bitops of sack_ok for FACK and DSACK are also abstracted to functions with appropriate names. Note: - One sack_ok = 1 remains but that's self explanary, i.e., it enables sack - Couple of !IsReno cases are changed to tcp_is_sack - There were no users for IsDSack => I dropped it Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
BUG_ON is an overkill. In fact, I was mislead by BUG_TRAP severity (equals to WARN_ON) which is much lower than BUG_ON's (that panics). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Previously TCP had a transitional state during which reno counted segments that are already below the current window into sacked_out, which is now prevented. In addition, re-try now the unconditional S+L skb catching. This approach conservatively calls just remove_sack and leaves reset_sack() calls alone. The best solution to the whole problem would be to first calculate the new sacked_out fully (this patch does not move reno_sack_reset calls from original sites and thus does not implement this). However, that would require very invasive change to fastretrans_alert (perhaps even slicing it to two halves). Alternatively, all callers of tcp_packets_in_flight (i.e., users that depend on sacked_out) should be postponed until the new sacked_out has been calculated but it isn't any simpler alternative. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Left_out was dropped a while ago, thus leaving verifying consistency of the "left out" as only task for the function in question. Thus make it's name more appropriate. In addition, it is intentionally converted to #define instead of static inline because the location of the invariant failure is the most important thing to have if this ever triggers. I think it would have been helpful e.g. in this case where the location of the failure point had to be based on some quesswork: http://lkml.org/lkml/2007/5/2/464 ...Luckily the guesswork seems to have proved to be correct. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
tp->left_out got removed but nothing came to replace it back then (users just did addition by themselves), so add function for users now. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
It is easily calculable when needed and user are not that many after all. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
No other users exist for tcp_ecn.h. Very few things remain in tcp.h, for most TCP ECN functions callers reside within a single .c file and can be placed there. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2007 1 次提交
-
-
由 David S. Miller 提交于
Based upon a report and initial patch by Peter Lieven. tcp4_md5sig_key and tcp6_md5sig_key need to start with the exact same members as tcp_md5sig_key. Because they are both cast to that type by tcp_v{4,6}_md5_do_lookup(). Unfortunately tcp{4,6}_md5sig_key use a u16 for the key length instead of a u8, which is what tcp_md5sig_key uses. This just so happens to work by accident on little-endian, but on big-endian it doesn't. Instead of casting, just place tcp_md5sig_key as the first member of the address-family specific structures, adjust the access sites, and kill off the ugly casts. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 8月, 2007 1 次提交
-
-
由 David S. Miller 提交于
As discovered by Evegniy Polyakov, if we try to sendmsg after a connection reset, we can do incredibly stupid things. The core issue is that inet_sendmsg() tries to autobind the socket, but we should never do that for TCP. Instead we should just go straight into TCP's sendmsg() code which will do all of the necessary state and pending socket error checks. TCP's sendpage already directly vectors to tcp_sendpage(), so this merely brings sendmsg() in line with that. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2007 1 次提交
-
-
由 Stephen Hemminger 提交于
This patch changes the API for the callback that is done after an ACK is received. It solves a couple of issues: * Some congestion controls want higher resolution value of RTT (controlled by TCP_CONG_RTT_SAMPLE flag). These don't really want a ktime, but all compute a RTT in microseconds. * Other congestion control could use RTT at jiffies resolution. To keep API consistent the units should be the same for both cases, just the resolution should change. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2007 1 次提交
-
-
由 Stephen Hemminger 提交于
None of the existing TCP congestion controls use the rtt value pased in the ca_ops->cong_avoid interface. Which is lucky because seq_rtt could have been -1 when handling a duplicate ack. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2007 1 次提交
-
-
由 Pavel Emelianov 提交于
tcp_out_of_resources() and tcp_close() perform the same checking of number of orphan sockets. Move this code into common place. Signed-off-by: NPavel Emelianov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2007 1 次提交
-
-
由 Ilpo Järvinen 提交于
TCP has a transitional state when SACK is not in use during which this invariant is temporarily broken. Without SACK, tcp_clean_rtx_queue does not decrement sacked_out. Therefore calls to tcp_sync_left_out before sacked_out is again corrected by tcp_fastretrans_alert can trigger this trap as sacked_out still has couple of segments that are already out of window. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 4月, 2007 2 次提交
-
-
由 Ilpo Järvinen 提交于
This is a corner case where less than MSS sized new data thingie is awaiting in the send queue. For F-RTO to work correctly, a new data segment must be sent at certain point or F-RTO cannot be used at all. RFC4138 allows overriding of Nagle at that point. Implementation uses frto_counter states 2 and 3 to distinguish when Nagle override is needed. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
SACKED_ACKED and LOST are mutually exclusive with SACK, thus having their sum larger than packets_out is bug with SACK. Eventually these bugs trigger traps in the tcp_clean_rtx_queue with SACK but it's much more informative to do this here. Non-SACK TCP, however, could get more than packets_out duplicate ACKs which each increment sacked_out, so it makes sense to do this kind of limitting for non-SACK TCP but not for SACK enabled one. Perhaps the author had the opposite in mind but did the logic accidently wrong way around? Anyway, the sacked_out incrementer code for non-SACK already deals this issue before calling sync_left_out so this trapping can be done unconditionally. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-