- 22 2月, 2007 5 次提交
-
-
由 Dale Farnsworth 提交于
Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
The generic version truncates addresses. This reverts commit 8e087929.
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Franck Bui-Huu 提交于
This patch adds trivial support for SMARTMIPS extension. This extension is currently implemented by 4KS[CD] CPUs. Basically it saves/restores ACX register, which is part of the SMARTMIPS ASE, when needed. This patch does *not* add any support for Smartmips MMU features. Futhermore this patch does not add explicit support for 4KS[CD] CPUs since they are respectively mips32 and mips32r2 compliant. So with the current processor configuration, a platform that has such CPUs needs to select both configs: CPU_HAS_SMARTMIPS SYS_HAS_CPU_MIPS32_R[12] This is due to the processor configuration which is mixing up all the architecture variants and the processor types. The drawback of this, is that we currently pass '-march=mips32' option to gcc when building a kernel instead of '-march=4ksc' for 4KSC case. This can lead to a kernel image a little bit bigger than required. Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 21 2月, 2007 7 次提交
-
-
由 Dale Farnsworth 提交于
Remove the use of CONFIG_MV643XX_ETH_[012] variables on most platforms. Instead, platform-specific code enables the ports supported by the hardware. After this patch, these config variables are only used in arch/ppc, so also move them from drivers/net/Kconfig to arch/ppc/Kconfig. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NJeff Garzik <jeff@garzik.org> Cc: Paul Mackerras <paulus@samba.org>
-
由 Atsushi Nemoto 提交于
init_8259A() is called from i8259A_resume() so should not be marked as __init. And add some tests for whether 8259A was already initialized or not. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
This commit broke gdb, since any BREAK or TRAP instruction cause SIGSEGV. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
This patch has added MTD device support for Cobalt. Moreover, removes old type FlashROM support. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 2月, 2007 5 次提交
-
-
由 Yoichi Yuasa 提交于
The Cobalt UART is actually connected to memory resource area. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
From the 01408c49 log message: The problem is that when we write to a file, the copy from userspace to pagecache is first done with preemption disabled, so if the source address is not immediately available the copy fails *and* *zeros* *the* *destination*. This is a problem because a concurrent read (which admittedly is an odd thing to do) might see zeros rather that was there before the write, or what was there after, or some mixture of the two (any of these being a reasonable thing to see). If the copy did fail, it will immediately be retried with preemption re-enabled so any transient problem with accessing the source won't cause an error. The first copying does not need to zero any uncopied bytes, and doing so causes the problem. It uses copy_from_user_atomic rather than copy_from_user so the simple expedient is to change copy_from_user_atomic to *not* zero out bytes on failure. < --- end cite --- > This patch finally implements at least a not so pretty solution by duplicating the relevant part of __copy_user. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
This fixes some sparse warnings. ("warning: symbol 'foo' was not declared. Should it be static?") Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 19 2月, 2007 11 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
This fixes some sparse warnings. pgtable-32.c:15:6: warning: symbol 'pgd_init' was not declared. Should it be static? pgtable-32.c:32:13: warning: symbol 'pagetable_init' was not declared. Should it be static? Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
native and compat do_signal and handle_signal are identical and can easily be unified. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This implementation has support for the concept of one separate ioport address space by PCI domain. A pointer to the virtual address where the port space of a domain has been mapped has been added to struct pci_controller and systems should be fixed to fill in this value. For single domain systems this will be the same value as passed to set_io_port_base(). Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
access_ok in compat-signal.h is wrong (checking destination instead of source) and redundant (already checked before calling this function). Also sf_mask in struct sigframe32 should be compat_sigset_t type. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 18 2月, 2007 1 次提交
-
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 17 2月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Fixup the is_contionous replacement by a flag field. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 2月, 2007 4 次提交
-
-
由 Eric W. Biederman 提交于
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
While C99 converting the ctl_table initializers I realized that the binary sysctl numbers were in conflict with the binary values under CTL_KERN. Including CTL_KERN KERN_VERSION as used by glibc. So I just removed the sysctl binary interface for these values, as it was unsupportable. Luckily these sysctl were inserted at the end of the sysctl list so this bug was not visible to userspace. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
The assignment of binary numbers for sys_sysctl use was in shambles and despite requiring methods. Nothing was implemented on the sys_sysctl side. So this patch gives a mercy killing to the sys_sysctl support for powermanagment on mips/au1000. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 2月, 2007 6 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Sharp 提交于
Signed-off-by: NAndrew Sharp <tigerand@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Franck Bui-Huu 提交于
When CONFIG_PREEMPT is not set, it also moves one branch instruction from ret_from_irq() to ret_from_exception(). Therefore we favour the return from irq case which should be more common than the other one. Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com> Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
When I post a patch (commit f431baa5), I just tried to not change behavior of existing codes, but it seems dec/int-handler.S had been broken since its previous commit 937a8015. The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so dec's plat_irq_dispatch should not do it, and there is no need to adjust RA. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Franck Bui-Huu 提交于
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-