- 20 1月, 2017 5 次提交
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull xfs fixes from Darrick Wong: "I have a few more patches this week -- one to make the behavior of a quota id ioctl consistent with the other filesystems, and the rest improve validation of i_mode & i_size values coming into xfs so that we don't read off the ends of arrays or crash when handed garbage disk data. Summary: - inode i_mode sanitization - prevent overflows in getnextquota - minor build fixes" * tag 'xfs-for-linux-4.10-rc5-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix xfs_mode_to_ftype() prototype xfs: don't wrap ID in xfs_dq_get_next_id xfs: sanity check inode di_mode xfs: sanity check inode mode when creating new dentry xfs: replace xfs_mode_to_ftype table with switch statement xfs: add missing include dependencies to xfs_dir2.h xfs: sanity check directory inode di_size xfs: make the ASSERT() condition likely
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - recognize that a PCI-to-PCIe bridge originates a PCIe hierarchy, so we enumerate that hierarchy correctly - X-Gene: fix a change merged for v4.10 that broke MSI - Keystone: avoid reading undefined registers, which can cause asynchronous external aborts - Supermicro X8DTH-i/6/iF/6F: ignore broken _CRS that caused us to change (and break) existing I/O port assignments * tag 'pci-v4.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: pci-xgene-msi: Fix CPU hotplug registration handling PCI: Enumerate switches below PCI-to-PCIe bridges x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F PCI: designware: Check for iATU unroll only on platforms that use ATU
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - regression fix for generic Wacom devices, from Jason Gerecke - DMA-on-stack fixes for hid-corsair driver, from Johan Hovold * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: Fix sibling detection regression HID: corsair: fix control-transfer error handling HID: corsair: fix DMA buffers on stack
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull two s390 bug fixes from Martin Schwidefsky: "Two changes, the first is a fix to add a missing memory clobber to the inline assembly to load control registers. This has not caused any issues so far, but who knows what code gcc will generate in future versions. The second change is an update for the default configurations. This includes CONFIG_BUG_ON_DATA_CORRUPTION=y, we want this to be enabled for s390. The usual approach to debug problems on production systems is to use crash on a system dump and for us avoiding data corruptions is priority one" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs s390/ctl_reg: make __ctl_load a full memory barrier
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fix from Juergen Gross: "A fix for Xen running in nested virtualization environment" * tag 'for-linus-4.10-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: partially revert "xen: Remove event channel notification through Xen PCI platform device"
-
- 19 1月, 2017 8 次提交
-
-
由 Jason Gerecke 提交于
Commit 345857bb ("HID: wacom: generic: Add support for sensor offsets") included a change to the operation and location of the call to 'wacom_add_shared_data' in 'wacom_parse_and_register'. The modifications included moving it higher up so that it would occur before the call to 'wacom_retrieve_hid_descriptor'. This was done to prevent a crash that would have occured when the report containing tablet offsets was fed into the driver with 'wacom_hid_report_raw_event' (specifically: the various 'wacom_wac_*_report' functions were written with the assumption that they would only be called once tablet setup had completed; 'wacom_wac_pen_report' in particular dereferences 'shared' which wasn't yet allocated). Moving the call to 'wacom_add_shared_data' effectively prevented the crash but also broke the sibiling detection code which assumes that the HID descriptor has been read and the various device_type flags set. To fix this situation, we restore the original 'wacom_add_shared_data' operation and location and instead implement an alternative change that can also prevent the crash. Specifically, we notice that the report functions mentioned above expect to be called only for input reports. By adding a check, we can prevent feature reports (such as the offset report) from causing trouble. Fixes: 345857bb ("HID: wacom: generic: Add support for sensor offsets") Signed-off-by: NJason Gerecke <jason.gerecke@wacom.com> Tested-by: NPing Cheng <pingc@wacom.com> Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull UBIFS fixes from Richard Weinberger: "This contains fixes for UBIFS: - a long standing issue in UBIFS journal replay code - fallout from the merge window" * tag 'upstream-4.10-rc5' of git://git.infradead.org/linux-ubifs: ubifs: Fix journal replay wrt. xattr nodes ubifs: remove redundant checks for encryption key ubifs: allow encryption ioctls in compat mode ubifs: add CONFIG_BLOCK dependency for encryption ubifs: fix unencrypted journal write ubifs: ensure zero err is returned on successful return
-
由 Arnd Bergmann 提交于
A harmless warning just got introduced: fs/xfs/libxfs/xfs_dir2.h:40:8: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] Removing the 'const' modifier avoids the warning and has no other effect. Fixes: 1fc4d33f ("xfs: replace xfs_mode_to_ftype table with switch statement") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A few ARM fixes: - fix a crash while performing TLB maintanence on early ARM SMP cores - blacklist Scorpion CPUs for hardware breakpoints - ARMs asm/types.h has been included as part of the UAPI due to the way the makefiles work, move it to uapi/asm/types.h to make it official - fix up ftrace syscall name matching" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8613/1: Fix the uaccess crash on PB11MPCore MAINTAINERS: update rmk's entries ARM: put types.h in uapi ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs ARM: 8632/1: ftrace: fix syscall name matching
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull SMP hotplug update from Thomas Gleixner: "This contains a trivial typo fix and an extension to the core code for dynamically allocating states in the prepare stage. The extension is necessary right now because we need a proper way to unbreak LTTNG, which iscurrently non functional due to the removal of the notifiers. Surely it's out of tree, but it's widely used by distros. The simple solution would have been to reserve a state for LTTNG, but I'm not fond about unused crap in the kernel and the dynamic range, which we admittedly should have done right away, allows us to remove quite some of the hardcoded states, i.e. those which have no ordering requirements. So doing the right thing now is better than having an smaller intermediate solution which needs to be reworked anyway" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Provide dynamic range for prepare stage perf/x86/amd/ibs: Fix typo after cleanup state names in cpu/hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Ingo Molnar: "Fix a crash in the ARM-Exynos clocksource driver, triggered by CPU hotplug operations" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/exynos_mct: Clear interrupt when cpu is shut down
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU fixes from Ingo Molnar: "This fixes sporadic ACPI related hangs in synchronize_rcu() that were caused by the ACPI code mistakenly relying on an aspect of RCU that was neither promised to work nor reliable but which happened to work - until in v4.9 we changed the RCU implementation, which made the hangs more prominent. Since the mis-use of the RCU facility wasn't properly detected and prevented either, these fixes make the RCU side work reliably instead of working around the problem in the ACPI code. Hence the slightly larger diffstat that goes beyond the normal scope of RCU fixes in -rc kernels" * 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Narrow early boot window of illegal synchronous grace periods rcu: Remove cond_resched() from Tiny synchronize_sched()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "An Intel PMU driver hotplug fix and three 'perf probe' tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Handle exclusive threadid correctly on CPU hotplug perf probe: Fix to probe on gcc generated functions in modules perf probe: Add error checks to offline probe post-processing perf probe: Fix to show correct locations for events on modules
-
- 18 1月, 2017 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux由 Linus Torvalds 提交于
Pull modules fix from Jessica Yu: - fix out-of-tree module breakage when it supplies its own definitions of true and false * tag 'modules-for-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: taint/module: Fix problems when out-of-kernel driver defines true or false
-
由 Eric Sandeen 提交于
The GETNEXTQOTA ioctl takes whatever ID is sent in, and looks for the next active quota for an user equal or higher to that ID. But if we are at the maximum ID and then ask for the "next" one, we may wrap back to zero. In this case, userspace may loop forever, because it will start querying again at zero. We'll fix this in userspace as well, but for the kernel, return -ENOENT if we ask for the next quota ID past UINT_MAX so the caller knows to stop. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Amir Goldstein 提交于
Check for invalid file type in xfs_dinode_verify() and fail to load the inode structure from disk. Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Amir Goldstein 提交于
The helper xfs_dentry_to_name() is used by 2 different classes of callers: Callers that pass zero mode and don't care about the returned name.type field and Callers that pass non zero mode and do care about the name.type field. Change xfs_dentry_to_name() to not take the mode argument and change the call sites of the first class to not pass the mode argument. Create a new helper xfs_dentry_mode_to_name() which does pass the mode argument and returns -EFSCORRUPTED if mode is invalid. Callers that translate non zero mode to on-disk file type now check the return value and will export the error to user instead of staging an invalid file type to be written to directory entry. Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Amir Goldstein 提交于
The size of the xfs_mode_to_ftype[] conversion table was too small to handle an invalid value of mode=S_IFMT. Instead of fixing the table size, replace the conversion table with a conversion helper that uses a switch statement. Suggested-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Amir Goldstein 提交于
xfs_dir2.h dereferences some data types in inline functions and fails to include those type definitions, e.g.: xfs_dir2_data_aoff_t, struct xfs_da_geometry. Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Amir Goldstein 提交于
This changes fixes an assertion hit when fuzzing on-disk i_mode values. The easy case to fix is when changing an empty file i_mode to S_IFDIR. In this case, xfs_dinode_verify() detects an illegal zero size for directory and fails to load the inode structure from disk. For the case of non empty file whose i_mode is changed to S_IFDIR, the ASSERT() statement in xfs_dir2_isblock() is replaced with return -EFSCORRUPTED, to avoid interacting with corrupted jusk also when XFS_DEBUG is disabled. Suggested-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Amir Goldstein 提交于
The ASSERT() condition is the normal case, not the exception, so testing the condition should be likely(), not unlikely(). Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Larry Finger 提交于
Commit 7fd8329b ("taint/module: Clean up global and module taint flags handling") used the key words true and false as character members of a new struct. These names cause problems when out-of-kernel modules such as VirtualBox include their own definitions of true and false. Fixes: 7fd8329b ("taint/module: Clean up global and module taint flags handling") Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Reported-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu> Reviewed-by: NPetr Mladek <pmladek@suse.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJessica Yu <jeyu@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Handle multicast packets properly in fast-RX path of mac80211, from Johannes Berg. 2) Because of a logic bug, the user can't actually force SW checksumming on r8152 devices. This makes diagnosis of hw checksumming bugs really annoying. Fix from Hayes Wang. 3) VXLAN route lookup does not take the source and destination ports into account, which means IPSEC policies cannot be matched properly. Fix from Martynas Pumputis. 4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger. 5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky. 6) If lwtunnel_fill_encap() fails, we do not abort the netlink message construction properly in fib_dump_info(), from David Ahern. 7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan Schmidt. 8) Openvswitch conntack actions need to maintain a correct checksum, fix from Lance Richardson. 9) ax25_disconnect() is missing a check for ax25->sk being NULL, in fact it already checks this, but not in all of the necessary spots. Fix from Basil Gunn. 10) Action GET operations in the packet scheduler can erroneously bump the reference count of the entry, making it unreleasable. Fix from Jamal Hadi Salim. Jamal gives a great set of example command lines that trigger this in the commit message. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) net sched actions: fix refcnt when GETing of action after bind net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions net/mlx4_core: Fix racy CQ (Completion Queue) free net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered net/mlx5e: Fix a -Wmaybe-uninitialized warning ax25: Fix segfault after sock connection timeout bpf: rework prog_digest into prog_tag tipc: allocate user memory with GFP_KERNEL flag net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types ip6_tunnel: Account for tunnel header in tunnel MTU mld: do not remove mld souce list info when set link down be2net: fix MAC addr setting on privileged BE3 VFs be2net: don't delete MAC on close on unprivileged BE3 VFs be2net: fix status check in be_cmd_pmac_add() cpmac: remove hopeless #warning ravb: do not use zero-length alignment DMA descriptor mlx4: do not call napi_schedule() without care openvswitch: maintain correct checksum state in conntrack actions tcp: fix tcp_fastopen unaligned access complaints on sparc ...
-
由 Linus Torvalds 提交于
Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "A tiny fix to make sure that page-sized mappings are page-aligned (and not say straddle two pages). This is important for some drivers (such as NVME)" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: ensure that page-sized mappings are page-aligned
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: "MMC core: - fix regressions detecting HS/HS DDR eMMC cards related to CMD6 MMC host: - mmc: mxs-mmc: Fix additional cycles after transmission stop - sdhci-acpi: Only powered up enabled acpi child devices - meson: avoid possible NULL dereference" * tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Restore parts of the polling policy when switch to HS/HS DDR mmc: mxs-mmc: Fix additional cycles after transmission stop mmc: sdhci-acpi: Only powered up enabled acpi child devices MMC: meson: avoid possible NULL dereference
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fixes from Brian Norris: "Just NAND updates from Boris: - avoid compiling xway NAND controller driver as a module (which didn't work) - fix tango NAND DT binding and make sure the controller is in a clean state at probe time - add dependency on HAS_IOMEM to the oxnas NAND driver - fix irq number validity check in the lpc32xx driver" * tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd: mtd: nand: lpc32xx: fix invalid error handling of a requested irq mtd: nand: tango: Reset pbus to raw mode in probe mtd: nand: tango: Update DT binding description mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM mtd: nand: xway: fix build because of module functions mtd: nand: xway: disable module support
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo-4.10-20170117' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull 'perf probe' fixes from Arnaldo Carvalho de Melo <acme@redhat.com> - Show correct locations for 'perf probe' on modules (Masami Hiramatsu) - Correctly handle 'perf probe's on GCC generated functions in modules (Masami Hiramatsu) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 17 1月, 2017 13 次提交
-
-
由 Marc Zyngier 提交于
The conversion to the new hotplug state machine introduced a regression where a successful hotplug registration would be treated as an error, effectively disabling the MSI driver forever. Fix it by doing the proper check on the return value. Fixes: 9c248f88 ("PCI/xgene-msi: Convert to hotplug state machine") Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: NDuc Dang <dhdang@apm.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: stable@vger.kernel.org
-
由 Richard Weinberger 提交于
When replaying the journal it can happen that a journal entry points to a garbage collected node. This is the case when a power-cut occurred between a garbage collect run and a commit. In such a case nodes have to be read using the failable read functions to detect whether the found node matches what we expect. One corner case was forgotten, when the journal contains an entry to remove an inode all xattrs have to be removed too. UBIFS models xattr like directory entries, so the TNC code iterates over all xattrs of the inode and removes them too. This code re-uses the functions for walking directories and calls ubifs_tnc_next_ent(). ubifs_tnc_next_ent() expects to be used only after the journal and aborts when a node does not match the expected result. This behavior can render an UBIFS volume unmountable after a power-cut when xattrs are used. Fix this issue by using failable read functions in ubifs_tnc_next_ent() too when replaying the journal. Cc: stable@vger.kernel.org Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by: NRock Lee <rockdotlee@gmail.com> Reviewed-by: NDavid Gstir <david@sigma-star.at> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Eric Biggers 提交于
In several places, ubifs checked for an encryption key before creating a file in an encrypted directory. This was redundant with fscrypt_setup_filename() or ubifs_new_inode(), and in the case of ubifs_link() it broke linking to special files. So remove the extra checks. Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Eric Biggers 提交于
The ubifs encryption ioctls did not work when called by a 32-bit program on a 64-bit kernel. Since 'struct fscrypt_policy' is not affected by the word size, ubifs just needs to allow these ioctls through, like what ext4 and f2fs do. Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Arnd Bergmann 提交于
This came up during the v4.10 merge window: warning: (UBIFS_FS_ENCRYPTION) selects FS_ENCRYPTION which has unmet direct dependencies (BLOCK) fs/crypto/crypto.c: In function 'fscrypt_zeroout_range': fs/crypto/crypto.c:355:9: error: implicit declaration of function 'bio_alloc';did you mean 'd_alloc'? [-Werror=implicit-function-declaration] bio = bio_alloc(GFP_NOWAIT, 1); The easiest way out is to limit UBIFS_FS_ENCRYPTION to configurations that also enable BLOCK. Fixes: d475a507 ("ubifs: Add skeleton for fscrypto") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Peter Rosin 提交于
Without this, I get the following on reboot: UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad target node (type 1) length (8240) UBIFS error (ubi1:0 pid 703): ubifs_load_znode: have to be in range of 48-4144 UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad indexing node at LEB 13:11080, error 5 magic 0x6101831 crc 0xb1cb246f node_type 9 (indexing node) group_type 0 (no node group) sqnum 546 len 128 child_cnt 5 level 0 Branches: 0: LEB 14:72088 len 161 key (133, inode) 1: LEB 14:81120 len 160 key (134, inode) 2: LEB 20:26624 len 8240 key (134, data, 0) 3: LEB 14:81280 len 160 key (135, inode) 4: LEB 20:34864 len 8240 key (135, data, 0) UBIFS warning (ubi1:0 pid 703): ubifs_ro_mode.part.0: switched to read-only mode, error -22 CPU: 0 PID: 703 Comm: mount Not tainted 4.9.0-next-20161213+ #1197 Hardware name: Atmel SAMA5 [<c010d2ac>] (unwind_backtrace) from [<c010b250>] (show_stack+0x10/0x14) [<c010b250>] (show_stack) from [<c024df94>] (ubifs_jnl_update+0x2e8/0x614) [<c024df94>] (ubifs_jnl_update) from [<c0254bf8>] (ubifs_mkdir+0x160/0x204) [<c0254bf8>] (ubifs_mkdir) from [<c01a6030>] (vfs_mkdir+0xb0/0x104) [<c01a6030>] (vfs_mkdir) from [<c0286070>] (ovl_create_real+0x118/0x248) [<c0286070>] (ovl_create_real) from [<c0283ed4>] (ovl_fill_super+0x994/0xaf4) [<c0283ed4>] (ovl_fill_super) from [<c019c394>] (mount_nodev+0x44/0x9c) [<c019c394>] (mount_nodev) from [<c019c4ac>] (mount_fs+0x14/0xa4) [<c019c4ac>] (mount_fs) from [<c01b5338>] (vfs_kern_mount+0x4c/0xd4) [<c01b5338>] (vfs_kern_mount) from [<c01b6b80>] (do_mount+0x154/0xac8) [<c01b6b80>] (do_mount) from [<c01b782c>] (SyS_mount+0x74/0x9c) [<c01b782c>] (SyS_mount) from [<c0107f80>] (ret_fast_syscall+0x0/0x3c) UBIFS error (ubi1:0 pid 703): ubifs_mkdir: cannot create directory, error -22 overlayfs: failed to create directory /mnt/ovl/work/work (errno: 22); mounting read-only Fixes: 7799953b ("ubifs: Implement encrypt/decrypt for all IO") Signed-off-by: NPeter Rosin <peda@axentia.se> Tested-by: NKevin Hilman <khilman@baylibre.com> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Colin Ian King 提交于
err is no longer being set on a successful return path, causing a garbage value being returned. Fix this by setting err to zero for the successful return path. Found with static analysis by CoverityScan, CID 1389473 Fixes: 7799953b ("ubifs: Implement encrypt/decrypt for all IO") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Zhou Chengming 提交于
The CPU hotplug function intel_pmu_cpu_starting() sets cpu_hw_events.excl_thread_id unconditionally to 1 when the shared exclusive counters data structure is already availabe for the sibling thread. This works during the boot process because the first sibling gets threadid 0 assigned and the second sibling which shares the data structure gets 1. But when the first thread of the core is offlined and onlined again it shares the data structure with the second thread and gets exclusive thread id 1 assigned as well. Prevent this by checking the threadid of the already online thread. [ tglx: Rewrote changelog ] Signed-off-by: NZhou Chengming <zhouchengming1@huawei.com> Cc: NuoHan Qiao <qiaonuohan@huawei.com> Cc: ak@linux.intel.com Cc: peterz@infradead.org Cc: kan.liang@intel.com Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: qiaonuohan@huawei.com Cc: davidcc@google.com Cc: guohanjun@huawei.com Link: http://lkml.kernel.org/r/1484536871-3131-1-git-send-email-zhouchengming1@huawei.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de> --- --- arch/x86/events/intel/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
-
由 Joonyoung Shim 提交于
When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13 ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: stable@vger.kernel.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jamal Hadi Salim 提交于
Demonstrating the issue: .. add a drop action $sudo $TC actions add action drop index 10 .. retrieve it $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 29 sec used 29 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... bug 1 above: reference is two. Reference is actually 1 but we forget to subtract 1. ... do a GET again and we see the same issue try a few times and nothing changes ~$ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 31 sec used 31 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... lets try to bind the action to a filter.. $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 ... and now a few GETs: $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 3 bind 1 installed 204 sec used 204 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 4 bind 1 installed 206 sec used 206 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 5 bind 1 installed 235 sec used 235 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 .... as can be observed the reference count keeps going up. After the fix $ sudo $TC actions add action drop index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 4 sec used 4 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 6 sec used 6 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 32 sec used 32 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 33 sec used 33 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Fixes: aecc5cef ("net sched actions: fix GETing actions") Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: - fix invalid fget()/fput() calls when doing file locking - fix multiple directory cache invalidation issues due to the client failing to recognise that the directory wasn't changed - fix client recovery when server reboots multiple times * tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix client recovery when server reboots multiple times NFSv4: update_changeattr should update the attribute timestamp NFSv4: Don't call update_changeattr() unless the unlink is successful NFSv4: Don't apply change_info4 twice on rename within a directory NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created nfs: Don't take a reference on fl->fl_file for LOCK operation
-
由 David S. Miller 提交于
Tariq Toukan says: ==================== mlx4 core fixes This patchset contains bug fixes from Jack to the mlx4 Core driver. Patch 1 solves a race in the flow of CQ free. Patch 2 moves some qp context flags update to the correct qp transition. Patch 3 eliminates warnings from the path of SRQ_LIMIT that flood the message log, and keeps them only in the path of SRQ_CATAS_ERROR. Series generated against net commit: 1a717fcf Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9c ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-