Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 27 8月, 2016 1 次提交
    • I
      bridge: switchdev: Add forward mark support for stacked devices · 6bc506b4
      由 Ido Schimmel 提交于 
      switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of
port netdevs so that packets being flooded by the device won't be
flooded twice.

It works by assigning a unique identifier (the ifindex of the first
bridge port) to bridge ports sharing the same parent ID. This prevents
packets from being flooded twice by the same switch, but will flood
packets through bridge ports belonging to a different switch.

This method is problematic when stacked devices are taken into account,
such as VLANs. In such cases, a physical port netdev can have upper
devices being members in two different bridges, thus requiring two
different 'offload_fwd_mark's to be configured on the port netdev, which
is impossible.

The main problem is that packet and netdev marking is performed at the
physical netdev level, whereas flooding occurs between bridge ports,
which are not necessarily port netdevs.

Instead, packet and netdev marking should really be done in the bridge
driver with the switch driver only telling it which packets it already
forwarded. The bridge driver will mark such packets using the mark
assigned to the ingress bridge port and will prevent the packet from
being forwarded through any bridge port sharing the same mark (i.e.
having the same parent ID).

Remove the current switchdev 'offload_fwd_mark' implementation and
instead implement the proposed method. In addition, make rocker - the
sole user of the mark - use the proposed method.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6bc506b4
  3. 20 7月, 2016 1 次提交
  5. 15 7月, 2016 1 次提交
  7. 18 5月, 2016 1 次提交
  9. 25 4月, 2016 1 次提交
  11. 11 1月, 2016 1 次提交
  13. 07 1月, 2016 1 次提交
  15. 16 12月, 2015 1 次提交
    • I
      switchdev: Pass original device to port netdev driver · 6ff64f6f
      由 Ido Schimmel 提交于 
      switchdev drivers need to know the netdev on which the switchdev op was
invoked. For example, the STP state of a VLAN interface configured on top
of a port can change while being member in a bridge. In this case, the
underlying driver should only change the STP state of that particular
VLAN and not of all the VLANs configured on the port.

However, current switchdev infrastructure only passes the port netdev down
to the driver. Solve that by passing the original device down to the
driver as part of the required switchdev object / attribute.

This doesn't entail any change in current switchdev drivers. It simply
enables those supporting stacked devices to know the originating device
and act accordingly.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6ff64f6f
  17. 17 11月, 2015 1 次提交
  19. 15 10月, 2015 5 次提交
  21. 12 10月, 2015 2 次提交
  23. 03 10月, 2015 6 次提交
  25. 30 9月, 2015 4 次提交
  27. 25 9月, 2015 7 次提交
  29. 12 8月, 2015 2 次提交
  31. 10 8月, 2015 2 次提交
  33. 21 7月, 2015 1 次提交
  35. 23 6月, 2015 1 次提交
  37. 18 5月, 2015 1 次提交