In the later patch, it indicates failure when we try to get a writable
pfn from the readonly memslot
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In current code, we always map writable pfn for the read fault, in order
to support readonly memslot, we map writable pfn only if 'writable'
is not NULL
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We do too many things in hva_to_pfn, this patch reorganize the code,
let it be better readable
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This set of functions is only used to read data from host space, in the
later patch, we will only get a readonly hva in gfn_to_hva_read, and
the function name is a good hint to let gfn_to_hva_read to pair with
kvm_read_hva()/kvm_read_hva_atomic()
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

It can instead of hva_to_pfn_atomic
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Quote Avi's comment:
| KVM_MEMSLOT_INVALID is actually an internal symbol, not used by
| userspace.  Please move it to kvm_host.h.

Also, we divide the memlsot->flags into two parts, the lower 16 bits
are visible for userspace, the higher 16 bits are internally used in
kvm
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Check flags when memslot is registered from userspace as Avi's suggestion
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently, we reexecute all unhandleable instructions if they do not
access on the mmio, however, it can not work if host map the readonly
memory to guest. If the instruction try to write this kind of memory,
it will fault again when guest retry it, then we will goto a infinite
loop: retry instruction -> write #PF -> emulation fail ->
retry instruction -> ...

Fix it by retrying the instruction only when it faults on the writable
memory
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

else, host continues to update stealtime after reboot,
which can corrupt e.g. initramfs area.
found when tracking down initramfs unpack error on initial reboot
(with qemu-kvm -smp 2, no problem with single-core).
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We validate irq pin number when routing is setup, so
code handling illegal irq # in pic and ioapic on each injection
is never called.
Drop it, replace with BUG_ON to catch out of bounds access bugs.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

All processors that support VMX have that feature, and guests (Xen) depend on
it.  As we already implement it, advertize it to the guest.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

MSR_IA32_DEBUGCTLMSR is zeroed on VMEXIT. Restore it to the correct
value.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Thanks Alex for KVM_HC_FEATURES inputs and Jan for VAPIC_POLL_IRQ,
and Peter (HPA) for suggesting hypercall ABI addition.
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

kvm_guest_time_update unconditionally clears hv_clock.flags field,
so the notification never reaches the guest.

Fix it by allowing PVCLOCK_GUEST_STOPPED to passthrough.
Reviewed-by: NEric B Munson <emunson@mgebm.net>
Reviewed-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

For apic_set_spiv() to track APIC SW state correctly it needs to see
previous and next values of the spurious vector register, but currently
memset() overwrite the old value before apic_set_spiv() get a chance to
do tracking. Fix it by calling apic_set_spiv() before overwriting old
value.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Those functions are used during interrupt injection. When inlined they
become nops on the fast path.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Usually all vcpus have local apic pointer initialized, so the check may
be completely skipped.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Usually all APICs are SW enabled so the check can be optimized out.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Usually all APICs are HW enabled so the check can be optimized out.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

CC: Jason Baron <jbaron@redhat.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

According to SDM apic is enabled on start up.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Do not change apic_base directly. Use kvm_lapic_set_base() instead.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

kvm_get_apic_base() needlessly checks irqchip_in_kernel although it does
the same no matter what result of the check is. kvm_set_apic_base() also
checks for irqchip_in_kernel, but kvm_lapic_set_base() can handle this
case.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently, we use the error code as error pfn to indicat the error
condition, it is not straightforward and it will not work on PAE
32-bit cpu with huge memory, since the valid physical address
can be at most 52 bits

For the normal pfn, the highest 12 bits should be zero, so we can
mask these bits to indicate the error.
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

After commit a2766325, the error page is replaced by the
error code, it need not be released anymore

[ The patch has been compiling tested for powerpc ]
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

After commit a2766325, the error pfn is replaced by the
error code, it need not be released anymore

[ The patch has been compiling tested for powerpc ]
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

It is used to eliminate the overload of function call and cleanup
the code
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove it since it is not used anymore
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

These functions are exported and can not inline, move them
to kvm_host.h to eliminate the overload of function call
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Then, remove get_bad_pfn
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Then, get_hwpoison_pfn and is_hwpoison_pfn can be removed
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

After that, the exported and un-inline function, get_fault_pfn,
can be removed
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

There are two bugs:
- the 'error page' is forgot to be released
  [ it is unneeded after commit a2766325, for backport, we
    still do kvm_release_pfn_clean for the error pfn ]

- guest pages are always released regardless of the unmapped page
  (e,g, caused by hwpoison)
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Two reasons:
 - x86 can integrate rmap and rmap_pde and remove heuristics in
   __gfn_to_rmap().
 - Some architectures do not need rmap.

Since rmap is one of the most memory consuming stuff in KVM, ppc'd
better restrict the allocation to Book3S HV.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This helps to make rmap architecture specific in a later patch.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead, check npages consistently.  This helps to make rmap
architecture specific in a later patch.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

 - bring back critical fixes (esp. aa67f609)
 - provide an updated base for development

* upstream: (4334 commits)
  missed mnt_drop_write() in do_dentry_open()
  UBIFS: nuke pdflush from comments
  gfs2: nuke pdflush from comments
  drbd: nuke pdflush from comments
  nilfs2: nuke write_super from comments
  hfs: nuke write_super from comments
  vfs: nuke pdflush from comments
  jbd/jbd2: nuke write_super from comments
  btrfs: nuke pdflush from comments
  btrfs: nuke write_super from comments
  ext4: nuke pdflush from comments
  ext4: nuke write_super from comments
  ext3: nuke write_super from comments
  Documentation: fix the VM knobs descritpion WRT pdflush
  Documentation: get rid of write_super
  vfs: kill write_super and sync_supers
  ACPI processor: Fix tick_broadcast_mask online/offline regression
  ACPI: Only count valid srat memory structures
  ACPI: Untangle a return statement for better readability
  Linux 3.6-rc1
  ...
Signed-off-by: NAvi Kivity <avi@redhat.com>

Pull VFS fixes and cleanups from Al Viro.

Most of this is the series to remove sync_supers() and the
->write_supers VFS callback from Artem Bityutskiy.  One commit to do the
actual removal work, a whole series of commits to fix up stale comments
etc all over the tree.

There's also a regression fix for an incorrect use of mnt_drop_write()
in do_dentry_open().

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  missed mnt_drop_write() in do_dentry_open()
  UBIFS: nuke pdflush from comments
  gfs2: nuke pdflush from comments
  drbd: nuke pdflush from comments
  nilfs2: nuke write_super from comments
  hfs: nuke write_super from comments
  vfs: nuke pdflush from comments
  jbd/jbd2: nuke write_super from comments
  btrfs: nuke pdflush from comments
  btrfs: nuke write_super from comments
  ext4: nuke pdflush from comments
  ext4: nuke write_super from comments
  ext3: nuke write_super from comments
  Documentation: fix the VM knobs descritpion WRT pdflush
  Documentation: get rid of write_super
  vfs: kill write_super and sync_supers