- 16 9月, 2009 11 次提交
-
-
由 Andi Kleen 提交于
Truncating metadata pages is not safe right now before we haven't audited all file systems. To enable truncation only for data address space define a new address_space callback error_remove_page. This is used for memory_failure.c memory error handling. This can be then set to truncate_inode_page() This patch just defines the new operation and adds documentation. Callers and users come in followon patches. Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Wu Fengguang 提交于
Add a simple way to invalidate a single page This is just a refactoring of the truncate.c code. Originally from Fengguang, modified by Andi Kleen. Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Nick Piggin 提交于
Extract out truncate_inode_page() out of the truncate path so that it can be used by memory-failure.c [AK: description, headers, fix typos] v2: Some white space changes from Fengguang Wu Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Andi Kleen 提交于
When a page has the poison bit set replace the PTE with a poison entry. This causes the right error handling to be done later when a process runs into it. v2: add a new flag to not do that (needed for the memory-failure handler later) (Fengguang) v3: remove unnecessary is_migration_entry() test (Fengguang, Minchan) Reviewed-by: NMinchan Kim <minchan.kim@gmail.com> Reviewed-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Andi Kleen 提交于
try_to_unmap currently has multiple modi (migration, munlock, normal unmap) which are selected by magic flag variables. The logic is not very straight forward, because each of these flag change multiple behaviours (e.g. migration turns off aging, not only sets up migration ptes etc.) Also the different flags interact in magic ways. A later patch in this series adds another mode to try_to_unmap, so this becomes quickly unmanageable. Replace the different flags with a action code (migration, munlock, munmap) and some additional flags as modifiers (ignore mlock, ignore aging). This makes the logic more straight forward and allows easier extension to new behaviours. Change all the caller to declare what they want to do. This patch is supposed to be a nop in behaviour. If anyone can prove it is not that would be a bug. Cc: Lee.Schermerhorn@hp.com Cc: npiggin@suse.de Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Andi Kleen 提交于
- Add a new VM_FAULT_HWPOISON error code to handle_mm_fault. Right now architectures have to explicitely enable poison page support, so this is forward compatible to all architectures. They only need to add it when they enable poison page support. - Add poison page handling in swap in fault code v2: Add missing delayacct_clear_flag (Hidehiro Kawai) v3: Really use delayacct_clear_flag (Hidehiro Kawai) Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Andi Kleen 提交于
Add new SIGBUS codes for reporting machine checks as signals. When the hardware detects an uncorrected ECC error it can trigger these signals. This is needed for telling KVM's qemu about machine checks that happen to guests, so that it can inject them, but might be also useful for other programs. I find it useful in my test programs. This patch merely defines the new types. - Define two new si_codes for SIGBUS. BUS_MCEERR_AO and BUS_MCEERR_AR * BUS_MCEERR_AO is for "Action Optional" machine checks, which means that some corruption has been detected in the background, but nothing has been consumed so far. The program can ignore those if it wants (but most programs would already get killed) * BUS_MCEERR_AR is for "Action Required" machine checks. This happens when corrupted data is consumed or the application ran into an area which has been known to be corrupted earlier. These require immediate action and cannot just returned to. Most programs would kill themselves. - They report the address of the corruption in the user address space in si_addr. - Define a new si_addr_lsb field that reports the extent of the corruption to user space. That's currently always a (small) page. The user application cannot tell where in this page the corruption happened. AK: I plan to write a man page update before anyone asks. Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Andi Kleen 提交于
Memory migration uses special swap entry types to trigger special actions on page faults. Extend this mechanism to also support poisoned swap entries, to trigger poison handling on page faults. This allows follow-on patches to prevent processes from faulting in poisoned pages again. v2: Fix overflow in MAX_SWAPFILES (Fengguang Wu) v3: Better overflow fix (Hidehiro Kawai) Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Andi Kleen 提交于
Needed for later patch that walks rmap entries on its own. This used to be very frowned upon, but memory-failure.c does some rather specialized rmap walking and rmap has been stable for quite some time, so I think it's ok now to export it. Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Andi Kleen 提交于
Hardware poisoned pages need special handling in the VM and shouldn't be touched again. This requires a new page flag. Define it here. The page flags wars seem to be over, so it shouldn't be a problem to get a new one. v2: Add TestSetHWPoison (suggested by Johannes Weiner) Acked-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Nicolas Pitre 提交于
Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: NNicolas Pitre <nico@fluxnic.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 9月, 2009 3 次提交
-
-
由 Eric Paris 提交于
Without this patch building a kernel emits millions of warning like: include/linux/selinux.h:92: warning: ?selinux_is_enabled? defined but not used When it is build without CONFIG_SECURITY_SELINUX. This is harmless, but the function should be inlined, so it gets compiled out. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Anirban Sinha 提交于
console_print() is an old legacy interface mostly unused in the entire kernel tree. It's best to clean up its existing use and let developers use their own implementation of it as they feel fit. Signed-off-by: NAnirban Sinha <asinha@zeugmasystems.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Albin Tonnerre 提交于
In a number of cases, the .suspend, .freeze, .poweroff and .resume, .thaw, .restore functions are identical. However, they all need to be assigned to avoid regressionsm as the previous code called .suspend resp. .resume in all those cases. SIMPLE_DEV_PM_OPS helps to deal with this case. [rjw: Changed the name of the macro and added the comment explaining its purpose.] Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 14 9月, 2009 10 次提交
-
-
由 Jan Kara 提交于
Remove these three functions since nobody uses them anymore. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
Introduce new function for generic inode syncing (vfs_fsync_range) and use it from fsync() path. Introduce also new helper for syncing after a sync write (generic_write_sync) using the generic function. Use these new helpers for syncing from generic VFS functions. This makes O_SYNC writes to block devices acquire i_mutex for syncing. If we really care about this, we can make block_fsync() drop the i_mutex and reacquire it before it returns. CC: Evgeniy Polyakov <zbr@ioremap.net> CC: ocfs2-devel@oss.oracle.com CC: Joel Becker <joel.becker@oracle.com> CC: Felix Blyakher <felixb@sgi.com> CC: xfs@oss.sgi.com CC: Anton Altaparmakov <aia21@cantab.net> CC: linux-ntfs-dev@lists.sourceforge.net CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> CC: linux-ext4@vger.kernel.org CC: tytso@mit.edu Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Christoph Hellwig 提交于
generic_file_aio_write_nolock() is now used only by block devices and raw character device. Filesystems should use __generic_file_aio_write() in case generic_file_aio_write() doesn't suit them. So rename the function to blkdev_aio_write() and move it to fs/blockdev.c. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
Rename __generic_file_aio_write_nolock() to __generic_file_aio_write(), add comments to write helpers explaining how they should be used and export __generic_file_aio_write() since it will be used by some filesystems. CC: ocfs2-devel@oss.oracle.com CC: Joel Becker <joel.becker@oracle.com> Acked-by: NEvgeniy Polyakov <zbr@ioremap.net> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
This simple helper saves some filesystems conversion from byte offset to page numbers and also makes the fdata* interface more complete. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Christoph Hellwig 提交于
blk_ioctl_discard duplicates large amounts of code from blkdev_issue_discard, the only difference between the two is that blkdev_issue_discard needs to send a barrier discard request and blk_ioctl_discard a non-barrier one, and blk_ioctl_discard needs to wait on the request. To facilitates this add a flags argument to blkdev_issue_discard to control both aspects of the behaviour. This will be very useful later on for using the waiting funcitonality for other callers. Based on an earlier patch from Matthew Wilcox <matthew@wil.cx>. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 David Woodhouse 提交于
The commands are conceptually writes, and in the case of IDE and SCSI commands actually are writes. They were only reads because we thought that would interact better with the elevators. Now the elevators know about discard requests, that advantage no longer exists. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
Implement blk_limits_io_opt() and make blk_queue_io_opt() a wrapper around it. DM needs this to avoid poking at the queue_limits directly. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nikanth Karthikesan 提交于
Currently, there is a single in_flight counter measuring the number of requests in the request_queue. But some monitoring tools would like to know how many read requests and write requests are in progress. Split the current in_flight counter into two seperate counters for read and write. This information is exported as a sysfs attribute, as changing the currently available stat files would break the existing tools. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Eric Paris 提交于
__validate_process_creds should check if selinux is actually enabled before running tests on the selinux portion of the credentials struct. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 12 9月, 2009 16 次提交
-
-
由 Hans de Goede 提交于
V4L2_FMT_FLAG_EMULATED 0x0002 This format is not native to the device but emulated through software (usually libv4l2), where possible try to use a native format instead for better performance. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Currently, V4L uses a scancode table whose index is the scancode and the value is the keycode. While this works, it has some drawbacks: 1) It requires that the scancode to be at the range 00-7f; 2) keycodes should be masked on 7 bits in order for it to work; 3) due to the 7 bits approach, sometimes it is not possible to replace the default keyboard to another one with a different encoding rule; 4) it is different than what is done with dvb-usb approach; 5) it requires a typedef for it to work. This is not a recommended Linux CodingStyle. This patch is part of a larger series of IR changes. It basically replaces the IR_KEYTAB_TYPE tables by a structured table: struct ir_scancode { u16 scancode; u32 keycode; }; This is very close to what dvb does. So, a further integration with DVB code will be easy. While we've changed the tables, for now, the IR keycode handling is still based on the old approach. The only notable effect is the redution of about 35% of the ir-common module size: text data bss dec hex filename 6721 29208 4 35933 8c5d old/ir-common.ko 5756 18040 4 23800 5cf8 new/ir-common.ko In thesis, we could be using above u8 for scancode, reducing even more the size of the module, but defining it as u16 is more convenient, since, on dvb, each scancode has up to 16 bits, and we currently have a few troubles with rc5, as their scancodes are defined with more than 8 bits. This patch itself shouldn't be doing any functional changes. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
[mchehab@redhat.com: Fix a few wrong IR keymaps] Signed-off-by: NShine Liu <shinel@foxmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
This patch adds files to control si4713 devices. Internal functions to control device properties and initialization procedures are into these files. Also, a v4l2 subdev interface is also exported. This way other drivers can use this as v4l2 i2c subdevice. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
This patch adds files which creates the radio interface for si4713 FM transmitter (modulator) devices. In order to do the real access to device registers, this driver uses the v4l2 subdev interface exported by si4713 i2c driver. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
This patch adds a new class of extended controls. This class is intended to support FM Radio Modulators properties such as: rds, audio limiters, audio compression, pilot tone generation, tuning power levels and preemphasis properties. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eduardo Valentin 提交于
Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The upcoming RDS encoder needs support for string controls. This patch implements the core implementation. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
Add Compro VideoMate S350 DVB-S driver. The card uses zl10313, zl10039, saa7130 integrated circuits. Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Add support for the remote control that comes with the Cinergy Hybrid T USB XS Thanks to Jelle de Jong for providing sample hardware to test with. Cc: Jelle de Jong <jelledejong@powercraft.nl> Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
This patch augments the init data passed by bridge drivers to ir-kbd-i2c, so that the ir_type can be set explicitly, and so ir-kbd-i2c internal get_key functions can be reused without requiring symbols from ir-kbd-i2c in the bridge driver. Signed-off-by: NAndy Walls <awalls@radix.net> Reviewed-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
Signed-off-by: NAndy Walls <awalls@radix.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Add capabilities to describe an FM transmitter device. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andreas Oberritter 提交于
DMX_ADD_PID allows to add multiple PIDs to a transport stream filter previously set up with DMX_SET_PES_FILTER and output=DMX_OUT_TSDEMUX_TAP. DMX_REMOVE_PID is used to drop a PID from a filter. These ioctls are to be used by readers of /dev/dvb/adapterX/demuxY. They may be called at any time, i.e. before or after the first filter on the shared file descriptor was started. They make it possible to record multiple services without the need to de- or re-multiplex TS packets. To accomplish this, dmxdev_filter->feed.ts has been converted to a list of struct dmxdev_feeds, each containing a PID value and a pointer to a struct dmx_ts_feed. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
To make UVC constants accessible by a future UVC gadget driver, move them from drivers/media/video/uvc/uvcvideo.h to include/linux/usb/video.h. Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-