- 22 10月, 2007 6 次提交
-
-
由 Pavel Emelyanov 提交于
Many places get the queue_mapping field from skb to pass it to the netif_subqueue_stopped() which will be 0 in any case. Make the helper that works with sk_buff Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Make the helper for getting the field, symmetrical to the "set" one. Return 0 if CONFIG_NETDEVICES_MULTIQUEUE=n Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean Delvare 提交于
By adding module aliases to inet_diag, tcp_diag and dccp_diag, we let them load automatically as needed. This makes tools like "ss" run faster. Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The calculation in SKB_WITH_OVERHEAD is incorrect in that it can cause an overflow across a page boundary which is what it's meant to prevent. In particular, the header length (X) should not be lumped together with skb_shared_info. The latter needs to be aligned properly while the header has no choice but to sit in front of wherever the payload is. Therefore the correct calculation is to take away the aligned size of skb_shared_info, and then subtract the header length. The resulting quantity L satisfies the following inequality: SKB_DATA_ALIGN(L + X) + sizeof(struct skb_shared_info) <= PAGE_SIZE This is the quantity used by alloc_skb to do the actual allocation. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds support for upcoming 5723 devices. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcel Holtmann 提交于
Assign the next free socket options level to be used by the Bluetooth protocol and address family. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 21 10月, 2007 5 次提交
-
-
由 Al Viro 提交于
New kind of audit rule predicates: "object is visible in given subtree". The part that can be sanely implemented, that is. Limitations: * if you have hardlink from outside of tree, you'd better watch it too (or just watch the object itself, obviously) * if you mount something under a watched tree, tell audit that new chunk should be added to watched subtrees * if you umount something in a watched tree and it's still mounted elsewhere, you will get matches on events happening there. New command tells audit to recalculate the trees, trimming such sources of false positives. Note that it's _not_ about path - if something mounted in several places (multiple mount, bindings, different namespaces, etc.), the match does _not_ depend on which one we are using for access. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Kicks the watch out without dropping it. Called under ->inotify_mutex Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Get a snapshot of a subtree, creating private clones of vfsmounts for all its components and release such snapshot resp. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
makes caller simpler *and* allows to scan ancestors Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 10月, 2007 29 次提交
-
-
由 Jason Uhlenkott 提交于
Fix an argument name in do_sys_open()'s prototype. Signed-off-by: NJason Uhlenkott <juhlenko@akamai.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Rolf Eike Beer 提交于
Typo: depricated -> deprecated Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Mike Anderson 提交于
This patch adds support for the dm_path_event dm_send_event functions which create and send udev events. Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Anderson 提交于
This patch adds a function to obtain a copy of a mapped device's name and uuid. Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Milan Broz 提交于
Make size of dm_ioctl struct always 312 bytes on all supported architectures. This change retains compatibility with already-compiled code because it uses an embedded offset to locate the payload that follows the structure. On 64-bit architectures there is no change at all; on 32-bit we are increasing the size of dm-ioctl from 308 to 312 bytes. Currently with 32-bit userspace / 64-bit kernel on x86_64 some ioctls (including rename, message) are incorrectly rejected by the comparison against 'param + 1'. This breaks userspace lvrename and multipath 'fail_if_no_path' changes, for example. (BTW Device-mapper uses its own versioning and ignores the ioctl size bits. Only the generic ioctl compat code on mixed arches checks them, and that will continue to accept both sizes for now, but we intend to list 308 as deprecated and eventually remove it.) Signed-off-by: NMilan Broz <mbroz@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Cc: Guido Guenther <agx@sigxcpu.org> Cc: Kevin Corry <kevcorry@us.ibm.com> Cc: stable@kernel.org
-
由 Serge Hallyn 提交于
Update the security_socket_peersec documentation in include/linux/security.h. security_socket_peersec has been split into two functions - _stream and _dgram, with new capabilities. Signed-off-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Rename struct ide_pci_device_s to struct ide_port_info. * Remove ide_pci_device_t typedef. While at it: * Fix __ide_pci_register_driver() comment. * Fix aec62xx_init_one() comment. * Remove unused 'cds' field from ide_hwgroup_t. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add hwif->ack_intr hook and use it instead of hwif->hw.ack_intr. * Add missing brackets to cris-v32 and powerpc ide_ack_intr() macros. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* hwif->hwif_data contains pointer to struct expansion_card so use ec->dma directly instead of caching it in hwif->hw.dma. * Remove no longer needed hw_regs_t.dma and NO_DMA define. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add CONFIG_IDE_ARCH_OBSOLETE_INIT to drivers/ide/Kconfig and use it instead of defining IDE_ARCH_OBSOLETE_INIT in <arch/ide.h>. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There is better documentation for these functions in drivers/ide/. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ide_find_port() helper. * Convert icside, rapide and ide_platform host drivers to use it. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ide_device_add() helper and convert host drivers to use it instead of open-coded variants. * Make ide_pci_setup_ports() and do_ide_setup_pci_device() take 'u8 *idx' argument instead of 'ata_index_t *index'. * Remove no longer needed ata_index_t. * Unexport probe_hwif_init() and make it static. * Unexport ide_proc_register_port(). There should be no functionality changes caused by this patch (sgiioc4.c: ide_proc_register_port() requires hwif->present to be set and it won't be set if probe_hwif_init() fails). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ->fixup method to ide_hwif_t. * Set hwif->fixup in ide_pci_setup_ports() to d->fixup. * Use hwif->fixup in probe_hwif(). * Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in ide_setup_pci_device(). * Add 'fixup' argument to ide_register_hw() and use it to set hwif->fixup, update all ide_register_hw() users accordingly. * Convert ide-cs/delkin_cb host drivers to use ide_register_hw(). * Restore hwif->fixup in ide_hwif_restore(). * Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup() and 'fixup' argument from probe_hwif(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flag to tell ide_pci_setup_ports() to set drive->{io_32bit,unmask} for both drives on the interface. Convert amd74xx, sl82c105 and via82cxxx host drivers to use these new host flags. While at it: * Add IDE_HFLAGS_AMD define (amd74xx host driver). * Add IDE_HFLAGS_VIA define (via82cxxx host driver). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_RQSIZE_256 host flag to tell ide_pci_setup_ports() to set hwif->rqsize to 256 sectors. Convert pdc202xx_old host driver to use it. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to always set hwif->irq to legacy IRQ 14/15 and convert generic IDE PCI and via82cxxx host drivers to use it. While at it: * Add IDE_HFLAGS_UMC define (generic IDE PCI host driver). * Remove no longer needed init_hwif_generic() (generic IDE PCI host driver). * Set d->udma_mask instead of hwif->ultra_mask (via82cxxx host driver). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add ->chipset field to ide_pci_device_t and use it in ide_hwif_configure() to set hwif->chipset. Convert cmd64x, cy82c693, rz1000 and trm290 host drivers to use this new ability. While at it define hwif_chipset_t as u8 to save some space in hw_regs_t, ide_hwif_t and ide_pci_device_t instances. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jan Engelhardt 提交于
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Trond Myklebust 提交于
lookup() and sillyrename() can race one another because the sillyrename() completion cannot take the parent directory's inode->i_mutex since the latter may be held by whoever is calling dput(). We therefore have little option but to add extra locking to ensure that nfs_lookup() and nfs_atomic_open() do not race with the sillyrename completion. If somebody has looked up the sillyrenamed file in the meantime, we just transfer the sillydelete information to the new dentry. Please refer to the bug-report at http://bugzilla.linux-nfs.org/show_bug.cgi?id=150Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Robert P. J. Day 提交于
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 John Anthony Kazos Jr 提交于
Convert the encoding of <include/linux/crypto.h> from ISO-8859-1 to UTF-8. Signed-off-by: NJohn Anthony Kazos Jr. <jakj@j-a-k-j.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Mathieu Desnoyers 提交于
Module example showing how to use the Linux Kernel Markers. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mathieu Desnoyers 提交于
The marker activation functions sits in kernel/marker.c. A hash table is used to keep track of the registered probes and armed markers, so the markers within a newly loaded module that should be active can be activated at module load time. marker_query has been removed. marker_get_first, marker_get_next and marker_release should be used as iterators on the markers. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: N"Frank Ch. Eigler" <fche@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mike Mason <mmlnx@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Srivatsa Vaddagiri 提交于
Enable "cgroup" (formerly containers) based fair group scheduling. This will let administrator create arbitrary groups of tasks (using "cgroup" pseudo filesystem) and control their cpu bandwidth usage. [akpm@linux-foundation.org: fix cpp condition] Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bernhard Walle 提交于
This patch adds a extended crashkernel syntax that makes the value of reserved system RAM dependent on the system RAM itself: crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset] range=start-[end] For example: crashkernel=512M-2G:64M,2G-:128M The motivation comes from distributors that configure their crashkernel command line automatically with some configuration tool (YaST, you know ;)). Of course that tool knows the value of System RAM, but if the user removes RAM, then the system becomes unbootable or at least unusable and error handling is very difficult. This series implements this change for i386, x86_64, ia64, ppc64 and sh. That should be all platforms that support kdump in current mainline. I tested all platforms except sh due to the lack of a sh processor. This patch: This is the generic part of the patch. It adds a parse_crashkernel() function in kernel/kexec.c that is called by the architecture specific code that actually reserves the memory. That function takes the whole command line and looks itself for "crashkernel=" in it. If there are multiple occurrences, then the last one is taken. The advantage is that if you have a bootloader like lilo or elilo which allows you to append a command line parameter but not to remove one (like in GRUB), then you can add another crashkernel value for testing at the boot command line and this one overwrites the command line in the configuration then. Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-