- 20 9月, 2011 1 次提交
-
-
由 Pavel Shilovsky 提交于
move it to the beginning of the loop. Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 05 8月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
The loop around lookup_one_len doesn't handle the case where it might return a negative dentry, which can cause an oops on the next pass through the loop. Check for that and break out of the loop with an error of -ENOENT if there is one. Fixes the panic reported here: https://bugzilla.redhat.com/show_bug.cgi?id=727927Reported-by: NTR Bentley <home@trarbentley.net> Reported-by: NIain Arnell <iarnell@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: stable@kernel.org Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 01 8月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
Currently, we take a sb->s_active reference and a cifsFileInfo reference when an oplock break workqueue job is queued. This is unnecessary and more complicated than it needs to be. Also as Al points out, deactivate_super has non-trivial locking implications so it's best to avoid that if we can. Instead, just cancel any pending oplock breaks for this filehandle synchronously in cifsFileInfo_put after taking it off the lists. That should ensure that this job doesn't outlive the structures it depends on. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 21 7月, 2011 1 次提交
-
-
由 Josef Bacik 提交于
This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 7月, 2011 3 次提交
-
-
由 Al Viro 提交于
not used by the instances anymore. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
redundant; all callers get it duplicated in mask & MAY_NOT_BLOCK and none of them removes that bit. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
its value depends only on inode and does not change; we might as well store it in ->i_op->check_acl and be done with that. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 19 7月, 2011 1 次提交
-
-
由 Al Viro 提交于
Add missing ->i_mutex, convert to lookup_one_len() instead of (broken) open-coded analog, cope with getting something like a//b as relative pathname. Simplify the hell out of it, while we are there... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Reviewed-by: NJeff Layton <jlayton@redhat.com>
-
- 08 7月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 07 7月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
...as that makes for a cumbersome interface. Make it take a regular smb_vol pointer and rely on the caller to zero it out if needed. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 25 6月, 2011 15 次提交
-
-
由 Al Viro 提交于
... instead of just failing with -EINVAL Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
if cifs_get_root() fails, we end up with ->mount() returning NULL, which is not what callers expect. Moreover, in case of superblock reuse we end up leaking a superblock reference... Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
have ->s_fs_info set by the set() callback passed to sget() Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
all callers of cifs_umount() proceed to do the same thing; pull it into cifs_umount() itself. Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
instead of calling it manually in case if cifs_read_super() fails to set ->s_root, just call it from ->kill_sb(). cifs_put_super() is gone now *and* we have cifs_sb shutdown and destruction done after the superblock is gone from ->s_instances. Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... to the point prior to sget(). Now we have cifs_sb set up early enough. Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
a) superblock argument is unused b) it always returns 0 Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
no need to wait until cifs_read_super() and we need it done by the time cifs_mount() will be called. Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
pull mountdata allocation up, so that it won't stand in the way when we lift cifs_mount() to location before sget(). Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
cifs_sb and nls end up leaked... Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
To close sget() races we'll need to be able to set cifs_sb up before we get the superblock, so we'll want to be able to do cifs_mount() earlier. Fortunately, it's easy to do - setting ->s_maxbytes can be done in cifs_read_super(), ditto for ->s_time_gran and as for putting MS_POSIXACL into ->s_flags, we can mirror it in ->mnt_cifs_flags until cifs_read_super() is called. Kill unused 'devname' argument, while we are at it... Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
if cifs_sb allocation fails, we still need to drop nls we'd stashed into volume_info - the one we would've copied to cifs_sb if we could allocate the latter. Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
if we get to out_super with ->s_root already set (e.g. with cifs_get_root() failure), we'll end up with cifs_put_super() called and ->mountdata freed twice. We'll also get cifs_sb freed twice and cifs_sb->local_nls dropped twice. The problem is, we can get to out_super both with and without ->s_root, which makes ->put_super() a bad place for such work. Switch to ->kill_sb(), have all that work done there after kill_anon_super(). Unlike ->put_super(), ->kill_sb() is called by deactivate_locked_super() whether we have ->s_root or not. Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Acked-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 6月, 2011 1 次提交
-
-
由 Al Viro 提交于
nothing potentially blocking except generic_permission(), which will DTRT Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 6月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 27 5月, 2011 5 次提交
-
-
由 Steve French 提交于
secMode to sec_mode and cifsTconInfo to cifs_tcon and cifsSesInfo to cifs_ses Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Add rwpidforward mount option that switches on a mode when we forward pid of a process who opened a file to any read and write operation. This can prevent applications like WINE from failing on read or write operation on a previously locked file region from the same netfd from another process if we use mandatory brlock style. It is actual for WINE because during a run of WINE program two processes work on the same netfd - share the same file struct between several VFS fds: 1) WINE-server does open and lock; 2) WINE-application does read and write. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Add cifs_match_super to use in sget to share superblock between mounts that have the same //server/sharename, credentials and mount options. It helps us to improve performance on work with future SMB2.1 leases. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Now we point superblock to a server share root and set a root dentry appropriately. This let us share superblock between mounts like //server/sharename/foo/bar and //server/sharename/foo further. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
and simplify error handling code. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 26 5月, 2011 1 次提交
-
-
由 Pavel Shilovsky 提交于
Fix double kfree() calls on the same pointers and cleanup mount code. Reviewed-and-Tested-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 24 5月, 2011 1 次提交
-
-
由 Pavel Shilovsky 提交于
Reorganize code to get mount option at first and when get a superblock. This lets us use shared superblock model further for equal mounts. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 21 5月, 2011 1 次提交
-
-
由 Steve French 提交于
Fix to earlier "Simplify invalidate part (try #6)" patch That patch caused problems with connectathon test 5. Reviewed-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 19 5月, 2011 5 次提交
-
-
由 Shirish Pargaonkar 提交于
Change idmap key name from cifs.cifs_idmap to cifs.idmap. Removed unused structure wksidarr and function match_sid(). Handle errors correctly in function init_cifs(). Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Sean Finney 提交于
Previously mount options were copied and updated in the cifs_sb_info struct only when CONFIG_CIFS_DFS_UPCALL was enabled. Making this information generally available allows us to remove a number of ifdefs, extra function params, and temporary variables. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSean Finney <seanius@seanius.net> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Sean Finney 提交于
A relatively minor nit, but also clarified the "consensus" from the preceding comments that it is in fact better to try for the kstrdup early and cleanup while cleaning up is still a simple thing to do. Reviewed-By: NSteve French <smfrench@gmail.com> Signed-off-by: NSean Finney <seanius@seanius.net> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Simplify many places when we call cifs_revalidate/invalidate to make it do what it exactly needs. Reviewed-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Recently introduced strictcache mode brought a new code that can be efficiently used by directio part. That's let us add vectored operations and break unnecessary cifs_user_read and cifs_user_write. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-