Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.

Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.

Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not.  Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Add expedited functions.  Review documentation and update
obsolete verbiage.  Also fix the advice for the RCU CPU-stall
kernel configuration parameter, and document RCU CPU-stall
warnings.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12635142581866-git-send-email->
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit d899bf7b (procfs: provide stack information for threads) introduced
to show stack information in /proc/{pid}/status.  But it cause large
performance regression.  Unfortunately /proc/{pid}/status is used ps
command too and ps is one of most important component.  Because both to
take mmap_sem and page table walk are heavily operation.

If many process run, the ps performance is,

[before d899bf7b]

% perf stat ps >/dev/null

 Performance counter stats for 'ps':

     4090.435806  task-clock-msecs         #      0.032 CPUs
             229  context-switches         #      0.000 M/sec
               0  CPU-migrations           #      0.000 M/sec
             234  page-faults              #      0.000 M/sec
      8587565207  cycles                   #   2099.425 M/sec
      9866662403  instructions             #      1.149 IPC
      3789415411  cache-references         #    926.409 M/sec
        30419509  cache-misses             #      7.437 M/sec

   128.859521955  seconds time elapsed

[after d899bf7b]

% perf stat  ps  > /dev/null

 Performance counter stats for 'ps':

     4305.081146  task-clock-msecs         #      0.028 CPUs
             480  context-switches         #      0.000 M/sec
               2  CPU-migrations           #      0.000 M/sec
             237  page-faults              #      0.000 M/sec
      9021211334  cycles                   #   2095.480 M/sec
     10605887536  instructions             #      1.176 IPC
      3612650999  cache-references         #    839.160 M/sec
        23917502  cache-misses             #      5.556 M/sec

   152.277819582  seconds time elapsed

Thus, this patch revert it. Fortunately /proc/{pid}/task/{tid}/smaps
provide almost same information. we can use it.

Commit d899bf7b introduced two features:

 1) Add the annotattion of [thread stack: xxxx] mark to
    /proc/{pid}/task/{tid}/maps.
 2) Add StackUsage field to /proc/{pid}/status.

I only revert (2), because I haven't seen (1) cause regression.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This replaces the list address for nilfs discussion to linux-nilfs at
vger.kernel.org from users at nilfs.org.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Per commit 240799cd, the option name for readahead should be
inode_readahead_blks, not inode_readahead.
Signed-off-by: NFang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Many struct driver_attribute descriptors are purely read-only
structures, and there's no need to change them. Therefore make
the promise not to, which will let those descriptors be put in
a ro section.
Signed-off-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most device_attributes are const, and are begging to be
put in a ro section. However, the create and remove
file interfaces were failing to propagate the const promise
which the only functions they call offer.
Signed-off-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Using create_proc_entry() + ->proc_fops assignment is racy because
->proc_fops will be NULL for some time, use proc_create() to avoid race.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Setting a thread's comm to be something unique is a very useful ability
and is helpful for debugging complicated threaded applications.  However
currently the only way to set a thread name is for the thread to name
itself via the PR_SET_NAME prctl.

However, there may be situations where it would be advantageous for a
thread dispatcher to be naming the threads its managing, rather then
having the threads self-describe themselves.  This sort of behavior is
available on other systems via the pthread_setname_np() interface.

This patch exports a task's comm via proc/pid/comm and
proc/pid/task/tid/comm interfaces, and allows thread siblings to write to
these values.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Mike Fulton <fultonm@ca.ibm.com>
Cc: Sean Foley <Sean_Foley@ca.ibm.com>
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Users on the list recently complained about differences across
filesystems w.r.t. how to mount without a journal replay.

In the discussion it was noted that xfs's "norecovery" option is
perhaps more descriptively accurate than "noload," so let's make
that an alias for ext3.

Also show this status in /proc/mounts
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

All callers really want the more logical filemap_fdatawait_range interface,
so convert them to use it and merge wait_on_page_writeback_range into
filemap_fdatawait_range.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Add exofs.txt to filesystems Documentation index and fix some typos,
identation and grammar.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>

the description in Documentation/filesystems/proc.txt of the
procs_running entry in /proc/stat is confusing (according to that
description, it looks as if procs_running could only be a number
between 0 and the number of CPUs).

Changed it to a more accurate description in the patch attached.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds "norecovery" mount option which disables temporal write
access to read-only mounts or snapshots during mount/recovery.
Without this option, write access will be even performed for those
types of mounts; the temporal write access is needed to mount root
file system read-only after an unclean shutdown.

This option will be helpful when user wants to prevent any write
access to the device.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Eric Sandeen <sandeen@redhat.com>

Since most of fs using nofoobar style option,
modified barrier=off option as nobarrier.
Signed-off-by: NJiro SEKIBA <jir@unicus.jp>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Users on the linux-ext4 list recently complained about differences
across filesystems w.r.t. how to mount without a journal replay.

In the discussion it was noted that xfs's "norecovery" option is
perhaps more descriptively accurate than "noload," so let's make
that an alias for ext4.

Also show this status in /proc/mounts
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

It is anticipated that when sb_issue_discard starts doing
real work on trim-capable devices, we may see issues.  Make
this mount-time optional, and default it to off until we know
that things are working out OK.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Catch an overly long wait for an old, dying active object when we want to
replace it with a new one.  The probability is that all the slow-work threads
are hogged, and the delete can't get a look in.

What we do instead is:

 (1) if there's nothing in the slow work queue, we sleep until either the dying
     object has finished dying or there is something in the slow work queue
     behind which we can queue our object.

 (2) if there is something in the slow work queue, we return ETIMEDOUT to
     fscache_lookup_object(), which then puts us back on the slow work queue,
     presumably behind the deletion that we're blocked by.  We are then
     deferred for a while until we work our way back through the queue -
     without blocking a slow-work thread unnecessarily.

A backtrace similar to the following may appear in the log without this patch:

	INFO: task kslowd004:5711 blocked for more than 120 seconds.
	"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
	kslowd004     D 0000000000000000     0  5711      2 0x00000080
	 ffff88000340bb80 0000000000000046 ffff88002550d000 0000000000000000
	 ffff88002550d000 0000000000000007 ffff88000340bfd8 ffff88002550d2a8
	 000000000000ddf0 00000000000118c0 00000000000118c0 ffff88002550d2a8
	Call Trace:
	 [<ffffffff81058e21>] ? trace_hardirqs_on+0xd/0xf
	 [<ffffffffa011c4d8>] ? cachefiles_wait_bit+0x0/0xd [cachefiles]
	 [<ffffffffa011c4e1>] cachefiles_wait_bit+0x9/0xd [cachefiles]
	 [<ffffffff81353153>] __wait_on_bit+0x43/0x76
	 [<ffffffff8111ae39>] ? ext3_xattr_get+0x1ec/0x270
	 [<ffffffff813531ef>] out_of_line_wait_on_bit+0x69/0x74
	 [<ffffffffa011c4d8>] ? cachefiles_wait_bit+0x0/0xd [cachefiles]
	 [<ffffffff8104c125>] ? wake_bit_function+0x0/0x2e
	 [<ffffffffa011bc79>] cachefiles_mark_object_active+0x203/0x23b [cachefiles]
	 [<ffffffffa011c209>] cachefiles_walk_to_object+0x558/0x827 [cachefiles]
	 [<ffffffffa011a429>] cachefiles_lookup_object+0xac/0x12a [cachefiles]
	 [<ffffffffa00aa1e9>] fscache_lookup_object+0x1c7/0x214 [fscache]
	 [<ffffffffa00aafc5>] fscache_object_state_machine+0xa5/0x52d [fscache]
	 [<ffffffffa00ab4ac>] fscache_object_slow_work_execute+0x5f/0xa0 [fscache]
	 [<ffffffff81082093>] slow_work_execute+0x18f/0x2d1
	 [<ffffffff8108239a>] slow_work_thread+0x1c5/0x308
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffff810821d5>] ? slow_work_thread+0x0/0x308
	 [<ffffffff8104be91>] kthread+0x7a/0x82
	 [<ffffffff8100beda>] child_rip+0xa/0x20
	 [<ffffffff8100b87c>] ? restore_args+0x0/0x30
	 [<ffffffff8104be17>] ? kthread+0x0/0x82
	 [<ffffffff8100bed0>] ? child_rip+0x0/0x20
	1 lock held by kslowd004/5711:
	 #0:  (&sb->s_type->i_mutex_key#7/1){+.+.+.}, at: [<ffffffffa011be64>] cachefiles_walk_to_object+0x1b3/0x827 [cachefiles]
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Start processing an object's operations when that object moves into the DYING
state as the object cannot be destroyed until all its outstanding operations
have completed.

Furthermore, make sure that read and allocation operations handle being woken
up on a dead object.  Such events are recorded in the Allocs.abt and
Retrvls.abt statistics as viewable through /proc/fs/fscache/stats.

The code for waiting for object activation for the read and allocation
operations is also extracted into its own function as it is much the same in
all cases, differing only in the stats incremented.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Handle netfs pages that the vmscan algorithm wants to evict from the pagecache
under OOM conditions, but that are waiting for write to the cache.  Under these
conditions, vmscan calls the releasepage() function of the netfs, asking if a
page can be discarded.

The problem is typified by the following trace of a stuck process:

	kslowd005     D 0000000000000000     0  4253      2 0x00000080
	 ffff88001b14f370 0000000000000046 ffff880020d0d000 0000000000000007
	 0000000000000006 0000000000000001 ffff88001b14ffd8 ffff880020d0d2a8
	 000000000000ddf0 00000000000118c0 00000000000118c0 ffff880020d0d2a8
	Call Trace:
	 [<ffffffffa00782d8>] __fscache_wait_on_page_write+0x8b/0xa7 [fscache]
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffffa0078240>] ? __fscache_check_page_write+0x63/0x70 [fscache]
	 [<ffffffffa00b671d>] nfs_fscache_release_page+0x4e/0xc4 [nfs]
	 [<ffffffffa00927f0>] nfs_release_page+0x3c/0x41 [nfs]
	 [<ffffffff810885d3>] try_to_release_page+0x32/0x3b
	 [<ffffffff81093203>] shrink_page_list+0x316/0x4ac
	 [<ffffffff8109372b>] shrink_inactive_list+0x392/0x67c
	 [<ffffffff813532fa>] ? __mutex_unlock_slowpath+0x100/0x10b
	 [<ffffffff81058df0>] ? trace_hardirqs_on_caller+0x10c/0x130
	 [<ffffffff8135330e>] ? mutex_unlock+0x9/0xb
	 [<ffffffff81093aa2>] shrink_list+0x8d/0x8f
	 [<ffffffff81093d1c>] shrink_zone+0x278/0x33c
	 [<ffffffff81052d6c>] ? ktime_get_ts+0xad/0xba
	 [<ffffffff81094b13>] try_to_free_pages+0x22e/0x392
	 [<ffffffff81091e24>] ? isolate_pages_global+0x0/0x212
	 [<ffffffff8108e743>] __alloc_pages_nodemask+0x3dc/0x5cf
	 [<ffffffff81089529>] grab_cache_page_write_begin+0x65/0xaa
	 [<ffffffff8110f8c0>] ext3_write_begin+0x78/0x1eb
	 [<ffffffff81089ec5>] generic_file_buffered_write+0x109/0x28c
	 [<ffffffff8103cb69>] ? current_fs_time+0x22/0x29
	 [<ffffffff8108a509>] __generic_file_aio_write+0x350/0x385
	 [<ffffffff8108a588>] ? generic_file_aio_write+0x4a/0xae
	 [<ffffffff8108a59e>] generic_file_aio_write+0x60/0xae
	 [<ffffffff810b2e82>] do_sync_write+0xe3/0x120
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffff810b18e1>] ? __dentry_open+0x1a5/0x2b8
	 [<ffffffff810b1a76>] ? dentry_open+0x82/0x89
	 [<ffffffffa00e693c>] cachefiles_write_page+0x298/0x335 [cachefiles]
	 [<ffffffffa0077147>] fscache_write_op+0x178/0x2c2 [fscache]
	 [<ffffffffa0075656>] fscache_op_execute+0x7a/0xd1 [fscache]
	 [<ffffffff81082093>] slow_work_execute+0x18f/0x2d1
	 [<ffffffff8108239a>] slow_work_thread+0x1c5/0x308
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffff810821d5>] ? slow_work_thread+0x0/0x308
	 [<ffffffff8104be91>] kthread+0x7a/0x82
	 [<ffffffff8100beda>] child_rip+0xa/0x20
	 [<ffffffff8100b87c>] ? restore_args+0x0/0x30
	 [<ffffffff8102ef83>] ? tg_shares_up+0x171/0x227
	 [<ffffffff8104be17>] ? kthread+0x0/0x82
	 [<ffffffff8100bed0>] ? child_rip+0x0/0x20

In the above backtrace, the following is happening:

 (1) A page storage operation is being executed by a slow-work thread
     (fscache_write_op()).

 (2) FS-Cache farms the operation out to the cache to perform
     (cachefiles_write_page()).

 (3) CacheFiles is then calling Ext3 to perform the actual write, using Ext3's
     standard write (do_sync_write()) under KERNEL_DS directly from the netfs
     page.

 (4) However, for Ext3 to perform the write, it must allocate some memory, in
     particular, it must allocate at least one page cache page into which it
     can copy the data from the netfs page.

 (5) Under OOM conditions, the memory allocator can't immediately come up with
     a page, so it uses vmscan to find something to discard
     (try_to_free_pages()).

 (6) vmscan finds a clean netfs page it might be able to discard (possibly the
     one it's trying to write out).

 (7) The netfs is called to throw the page away (nfs_release_page()) - but it's
     called with __GFP_WAIT, so the netfs decides to wait for the store to
     complete (__fscache_wait_on_page_write()).

 (8) This blocks a slow-work processing thread - possibly against itself.

The system ends up stuck because it can't write out any netfs pages to the
cache without allocating more memory.

To avoid this, we make FS-Cache cancel some writes that aren't in the middle of
actually being performed.  This means that some data won't make it into the
cache this time.  To support this, a new FS-Cache function is added
fscache_maybe_release_page() that replaces what the netfs releasepage()
functions used to do with respect to the cache.

The decisions fscache_maybe_release_page() makes are counted and displayed
through /proc/fs/fscache/stats on a line labelled "VmScan".  There are four
counters provided: "nos=N" - pages that weren't pending storage; "gon=N" -
pages that were pending storage when we first looked, but weren't by the time
we got the object lock; "bsy=N" - pages that we ignored as they were actively
being written when we looked; and "can=N" - pages that we cancelled the storage
of.

What I'd really like to do is alter the behaviour of the cancellation
heuristics, depending on how necessary it is to expel pages.  If there are
plenty of other pages that aren't waiting to be written to the cache that
could be ejected first, then it would be nice to hold up on immediate
cancellation of cache writes - but I don't see a way of doing that.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

FS-Cache doesn't correctly handle the netfs requesting a read from the cache
on an object that failed or was withdrawn by the cache.  A trace similar to
the following might be seen:

	CacheFiles: Lookup failed error -105
	[exe   ] unexpected submission OP165afe [OBJ6cac OBJECT_LC_DYING]
	[exe   ] objstate=OBJECT_LC_DYING [OBJECT_LC_DYING]
	[exe   ] objflags=0
	[exe   ] objevent=9 [fffffffffffffffb]
	[exe   ] ops=0 inp=0 exc=0
	Pid: 6970, comm: exe Not tainted 2.6.32-rc6-cachefs #50
	Call Trace:
	 [<ffffffffa0076477>] fscache_submit_op+0x3ff/0x45a [fscache]
	 [<ffffffffa0077997>] __fscache_read_or_alloc_pages+0x187/0x3c4 [fscache]
	 [<ffffffffa00b6480>] ? nfs_readpage_from_fscache_complete+0x0/0x66 [nfs]
	 [<ffffffffa00b6388>] __nfs_readpages_from_fscache+0x7e/0x176 [nfs]
	 [<ffffffff8108e483>] ? __alloc_pages_nodemask+0x11c/0x5cf
	 [<ffffffffa009d796>] nfs_readpages+0x114/0x1d7 [nfs]
	 [<ffffffff81090314>] __do_page_cache_readahead+0x15f/0x1ec
	 [<ffffffff81090228>] ? __do_page_cache_readahead+0x73/0x1ec
	 [<ffffffff810903bd>] ra_submit+0x1c/0x20
	 [<ffffffff810906bb>] ondemand_readahead+0x227/0x23a
	 [<ffffffff81090762>] page_cache_sync_readahead+0x17/0x19
	 [<ffffffff8108a99e>] generic_file_aio_read+0x236/0x5a0
	 [<ffffffffa00937bd>] nfs_file_read+0xe4/0xf3 [nfs]
	 [<ffffffff810b2fa2>] do_sync_read+0xe3/0x120
	 [<ffffffff81354cc3>] ? _spin_unlock_irq+0x2b/0x31
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffff811848e5>] ? selinux_file_permission+0x5d/0x10f
	 [<ffffffff81352bdb>] ? thread_return+0x3e/0x101
	 [<ffffffff8117d7b0>] ? security_file_permission+0x11/0x13
	 [<ffffffff810b3b06>] vfs_read+0xaa/0x16f
	 [<ffffffff81058df0>] ? trace_hardirqs_on_caller+0x10c/0x130
	 [<ffffffff810b3c84>] sys_read+0x45/0x6c
	 [<ffffffff8100ae2b>] system_call_fastpath+0x16/0x1b

The object state might also be OBJECT_DYING or OBJECT_WITHDRAWING.

This should be handled by simply rejecting the new operation with ENOBUFS.
There's no need to log an error for it.  Events of this type now appear in the
stats file under Ops:rej.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

FS-Cache has two structs internally for keeping track of the internal state of
a cached file: the fscache_cookie struct, which represents the netfs's state,
and fscache_object struct, which represents the cache's state.  Each has a
pointer that points to the other (when both are in existence), and each has a
spinlock for pointer maintenance.

Since netfs operations approach these structures from the cookie side, they get
the cookie lock first, then the object lock.  Cache operations, on the other
hand, approach from the object side, and get the object lock first.  It is not
then permitted for a cache operation to get the cookie lock whilst it is
holding the object lock lest deadlock occur; instead, it must do one of two
things:

 (1) increment the cookie usage counter, drop the object lock and then get both
     locks in order, or

 (2) simply hold the object lock as certain parts of the cookie may not be
     altered whilst the object lock is held.

It is also not permitted to follow either pointer without holding the lock at
the end you start with.  To break the pointers between the cookie and the
object, both locks must be held.

fscache_write_op(), however, violates the locking rules: It attempts to get the
cookie lock without (a) checking that the cookie pointer is a valid pointer,
and (b) holding the object lock to protect the cookie pointer whilst it follows
it.  This is so that it can access the pending page store tree without
interference from __fscache_write_page().

This is fixed by splitting the cookie lock, such that the page store tracking
tree is protected by its own lock, and checking that the cookie pointer is
non-NULL before we attempt to follow it whilst holding the object lock.

The new lock is subordinate to both the cookie lock and the object lock, and so
should be taken after those.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Permit the operations to retrieve data from the cache or to allocate space in
the cache for future writes to be interrupted whilst they're waiting for
permission for the operation to proceed.  Typically this wait occurs whilst the
cache object is being looked up on disk in the background.

If an interruption occurs, and the operation has not yet been given the
go-ahead to run, the operation is dequeued and cancelled, and control returns
to the read operation of the netfs routine with none of the requested pages
having been read or in any way marked as known by the cache.

This means that the initial wait is done interruptibly rather than
uninterruptibly.

In addition, extra stats values are made available to show the number of ops
cancelled and the number of cache space allocations interrupted.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Count entries to and exits from cache operation table functions.  Maintain
these as a single counter that's added to or removed from as appropriate.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Allow the current state of all fscache objects to be dumped by doing:

	cat /proc/fs/fscache/objects

By default, all objects and all fields will be shown.  This can be restricted
by adding a suitable key to one of the caller's keyrings (such as the session
keyring):

	keyctl add user fscache:objlist "<restrictions>" @s

The <restrictions> are:

	K	Show hexdump of object key (don't show if not given)
	A	Show hexdump of object aux data (don't show if not given)

And paired restrictions:

	C	Show objects that have a cookie
	c	Show objects that don't have a cookie
	B	Show objects that are busy
	b	Show objects that aren't busy
	W	Show objects that have pending writes
	w	Show objects that don't have pending writes
	R	Show objects that have outstanding reads
	r	Show objects that don't have outstanding reads
	S	Show objects that have slow work queued
	s	Show objects that don't have slow work queued

If neither side of a restriction pair is given, then both are implied.  For
example:

	keyctl add user fscache:objlist KB @s

shows objects that are busy, and lists their object keys, but does not dump
their auxiliary data.  It also implies "CcWwRrSs", but as 'B' is given, 'b' is
not implied.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

Oops: I missed two files in the first commit that created this
directory.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This reverts commit d0646f7b, as
requested by Eric Sandeen.

It can basically cause an ext4 filesystem to miss recovery (and thus get
mounted with errors) if the journal checksum does not match.

Quoth Eric:

   "My hand-wavy hunch about what is happening is that we're finding a
    bad checksum on the last partially-written transaction, which is
    not surprising, but if we have a wrapped log and we're doing the
    initial scan for head/tail, and we abort scanning on that bad
    checksum, then we are essentially running an unrecovered filesystem.

    But that's hand-wavy and I need to go look at the code.

    We lived without journal checksums on by default until now, and at
    this point they're doing more harm than good, so we should revert
    the default-changing commit until we can fix it and do some good
    power-fail testing with the fixes in place."

See

	http://bugzilla.kernel.org/show_bug.cgi?id=14354

for all the gory details.
Requested-by: NEric Sandeen <sandeen@redhat.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Alexey Fisher <bug-track@fisher-privat.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We're adding enough nfs documentation that it may as well have its own
subdirectory.
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

CPU time of a guest is always accounted in 'user' time
without concern for the nice value of its counterpart
process although the guest is scheduled under the nice
value.

This patch fixes the defect and accounts cpu time of
a niced guest in 'nice' time as same as a niced process.

And also the patch adds 'guest_nice' to cpuacct. The
value provides niced guest cpu time which is like 'nice'
to 'user'.

The original discussions can be found here:

  http://www.mail-archive.com/kvm@vger.kernel.org/msg23982.html
  http://www.mail-archive.com/kvm@vger.kernel.org/msg23860.htmlSigned-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>
Acked-by: NAvi Kivity <avi@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1256314810-7897-1-git-send-email-ozaki.ryota@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NJan Kara <jack@suse.cz>

The /proc/fs/ext4/<dev>/mb_history was maintained manually, and had a
number of problems: it required a largish amount of memory to be
allocated for each ext4 filesystem, and the s_mb_history_lock
introduced a CPU contention problem.  

By ripping out the mb_history code and replacing it with ftrace
tracepoints, and we get more functionality: timestamps, event
filtering, the ability to correlate mballoc history with other ext4
tracepoints, etc.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ca_maxresponsesize and ca_maxrequest size include the RPC header.

sv_max_mesg is sv_max_payolad plus a page for overhead and is used in
svc_init_buffer to allocate server buffer space for both the request and reply.
Note that this means we can service an RPC compound that requires
ca_maxrequestsize (MAXWRITE) or ca_max_responsesize (MAXREAD) but that we do
not support an RPC compound that requires both ca_maxrequestsize and
ca_maxresponsesize.
Signed-off-by: NAndy Adamson <andros@netapp.com>
[bfields@citi.umich.edu: more documentation updates]
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Caught by Benny, thanks!
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Documentation/filesystems/sharedsubtree.txt needs updating because the
mount command in util-linux package is well aware of shared subtree
features now.  The patch also fixes two typos in sharedsubtree.txt.
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mount(8) handles shared subtrees just fine, so remove the smount program
from Documentation/filesystems/sharedsubtree.txt.

Fix annoying "Lets" -> "Let's".
Insert space between '#' prompt and "mount" command.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the documentation to describe FS-Cache related
caching parameters. This patch also updates the pointers
to 9p-related papers and adds pointer to the Wiki.
Signed-off-by: NAbhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Noticed-by: NJoe Perches <joe@perches.com>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>