Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 18 9月, 2006 12 次提交
    • S
      ieee1394: safer definition of empty macros · 611aa19f
      由 Stefan Richter 提交于 
      A deactivated macro, defined as "#define foo(bar)", will result in
silent corruption if somebody forgets a semicolon after a call to foo.
Replace it by "#define foo(bar) do {} while (0)" which will reveal any
respective syntax errors.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      611aa19f
    • D
      video1394: add poll file operation support · 4b60912e
      由 David Moore 提交于 
      This patch adds support for the poll file operation to the video1394
driver.
Signed-off-by: NDavid Moore <dcm@acm.org>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      4b60912e
    • A
      the scheduled removal of drivers/ieee1394/sbp2.c:force_inquiry_hack · a1b3206b
      由 Adrian Bunk 提交于 
      This patch contains the scheduled removal of the force_inquiry_hack
module parameter.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      a1b3206b
    • A
      Initialize ieee1394 early when built in · 8df4083c
      由 Andi Kleen 提交于 
      This makes debugging with firescope easier.

Signed-off-by: Andi Kleen <ak@suse.de> (original patch)

Update:
 - no need for #ifdef MODULE
 - add comment in ieee1394_core, more verbose comment in ohci1394

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (update)
      8df4083c
    • S
      ieee1394: sbp2: convert sbp2util_down_timeout to waitqueue · e8398bb7
      由 Stefan Richter 提交于 
      The waitqueue API is used to replace a custom wait mechanism.  Only one
global waitqueue (instead of per-device waitqueues or completions) is
added because there is usually just one waiter.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      e8398bb7
    • S
      ieee1394: sbp2: more checks of status block · 6065772d
      由 Stefan Richter 提交于 
       - Add checks for the (very unlikely) cases that the target writes too
   little or too much status data or writes unsolicited status.
 - Indicate that these and similar conditions are unlikely().
 - Check the 'resp' and 'sbp_status' fields for possible failure status.
 - Slightly optimize access macros for the status block bitfields.
 - Unify a few related log messages.

TODO:  Check if 'src'==1, then withhold the respective ORB from reuse
until status for any subsequent ORB was received.  This is an old bug
whose fix requires more complex command queue handling.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      6065772d
    • S
      ieee1394: sbp2: safer initialization of status fifo · 3e98eab4
      由 Stefan Richter 提交于 
      Sbp2's copy of the status fifo was cleared when management ORBs or new
command ORBs were prepared.  The latter had potential for a race
condition if the block layer's soft IRQ and the 1394 LLD's interrupt
handler ran on different CPUs.  It would also yield wrong status if a
command was completed with non-zero completion status before other
commands that had zero completion status, and no new command was
enqueued in the meantime.

Now, the status buffer is cleared right before it is written.  Thus it
ends up in the following simpler and safer access pattern:
 - sbp2_alloc_device: allocates and implicitly clears once,
 - sbp2_handle_status_write: clears, writes, and reads,
 - sbp2_query_logins, sbp2_login_device, sbp2_reconnect_device: read.
The latter three do not race with sbp2_handle_status_write because of
how the protocol works.

As a tiny optimization, the first two quadlets of the status never need
to be cleared.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      3e98eab4
    • S
      ieee1394: sbp2: optimize DMA direction of command ORBs · d4018d7f
      由 Stefan Richter 提交于 
      Only the driver writes ORBs, the device just reads them.  Therefore
PCI_DMA_BIDIRECTIONAL can be replaced by PCI_DMA_TODEVICE which may be
cheaper on some architectures.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      d4018d7f
    • S
      ieee1394: sbp2: discard return value of sbp2_link_orb_command · 28212767
      由 Stefan Richter 提交于 
      Since sbp2 is at the moment unable to do anything with the return value
of sbp2_link_orb_command, just discard it.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      28212767
    • S
      ieee1394: sbp2: safer last_orb and next_ORB handling · cc078189
      由 Stefan Richter 提交于 
      The sbp2 initiator has two ways to tell a target's fetch agent about new
command ORBs:
 - Write the ORB's address to the ORB_POINTER register.  This must not
   be done while the fetch agent is active.
 - Put the ORB's address into the previously submitted ORB's next_ORB
   field and write to the DOORBELL register.  This may be done while the
   fetch agent is active or suspended.  It must not be done while the
   fetch agent is in reset state.
Sbp2 has a last_orb pointer which indicates in what way a new command
should be announced.  That pointer is concurrently accessed at various
occasions.  Furthermore, initiator and target are accessing the next_ORB
field of ORBs concurrently and asynchronously.

This patch does:
 - Protect all initiator accesses to last_orb by sbp2_command_orb_lock.
 - Add pci_dma_sync_single_for_device before a previously submitted
   ORB's next_ORB field is overwritten.
 - Insert a memory barrier between when next_ORB_lo and next_ORB_hi are
   overwritten.  Next_ORB_hi must not be updated before next_ORB_lo.
 - Remove the rather unspecific and now superfluous qualifier "volatile"
   from the next_ORB fields.
 - Add comments on how last_orb is connected with what is known about
   the target's fetch agent's state.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      cc078189
    • S
      ieee1394: remove #include <asm/semaphore.h> · 9154df53
      由 Stefan Richter 提交于 
      These includes in ieee1394_core and eth1394 are obsolete.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      9154df53
    • S
      ieee1394: shrink tlabel pools, remove tpool semaphores · 9951903e
      由 Stefan Richter 提交于 
      This patch reduces the size of struct hpsb_host and also removes
semaphores from ieee1394_transactions.c.  On i386, struct hpsb_host
shrinks from 10656 bytes to 6688 bytes.  This is accomplished by
 - using a single wait_queue for hpsb_get_tlabel instead of many
   instances of semaphores,
 - using a single lock to serialize access to all tlabel pools (the
   protected code regions are small, i.e. lock contention very low),
 - omitting the sysfs attribute tlabels_allocations.

Drawback:  In the rare case that a process needs to sleep because all
transaction labels for the node are temporarily exhausted, it is also
woken up if a tlabel for a different node became free, checks for an
available tlabel, and is put to sleep again.  The check is not costly
and the situation occurs extremely rarely.  (Tlabels are typically
only exhausted if there was no context switch to the khpsbpkt thread
which recycles tlables.)  Therefore the benefit of reduced tpool size
outweighs this drawback.

The sysfs attributes tlabels_free and tlabels_mask are not compiled
anymore unless CONFIG_IEEE1394_VERBOSEDEBUG is set.

The by far biggest member of struct hpsb_host, the struct csr_control
csr (5272 bytes on i386), is now placed at the end of struct hpsb_host.

Note, hpsb_get_tlabel calls the macro wait_event_interruptible with a
condition argument which has a side effect (allocation of a tlabel and
manipulation of the packet).  This side effect happens only if the
condition is true.  The patch relies on wait_event_interruptible not
evaluating the condition again after it became true.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      9951903e
  3. 28 8月, 2006 1 次提交
  5. 06 8月, 2006 1 次提交
  7. 04 7月, 2006 18 次提交
  9. 03 7月, 2006 2 次提交
  11. 01 7月, 2006 1 次提交
  13. 28 6月, 2006 2 次提交
  15. 27 6月, 2006 2 次提交
  17. 26 6月, 2006 1 次提交