- 02 10月, 2012 2 次提交
-
-
由 Eric Dumazet 提交于
Add GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. Tested using IPv4 and IPv6 TCP traffic inside this tunnel, and checking GRO is building large packets. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This adds a new include file (include/net/gro_cells.h), to bring GRO (Generic Receive Offload) capability to tunnels, in a modular way. Because tunnels receive path is lockless, and GRO adds a serialization using a napi_struct, I chose to add an array of up to DEFAULT_MAX_NUM_RSS_QUEUES cells, so that multi queue devices wont be slowed down because of GRO layer. skb_get_rx_queue() is used as selector. In the future, we might add optional fanout capabilities, using rxhash for example. With help from Ben Hutchings who reminded me netif_get_num_default_rss_queues() function. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 9月, 2012 3 次提交
-
-
由 Eric Dumazet 提交于
Remove two holes on 64bit arches, and put dev_list at the end of napi_struct since its not used in fast path. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It seems sk_init() has no value today and even does strange things : # grep . /proc/sys/net/core/?mem_* /proc/sys/net/core/rmem_default:212992 /proc/sys/net/core/rmem_max:131071 /proc/sys/net/core/wmem_default:212992 /proc/sys/net/core/wmem_max:131071 We can remove it completely. Signed-off-by: NEric Dumazet <edumazet@google.com> Reviewed-by: NShan Wei <davidshan@tencent.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Linux tunnels were written before RFC6040 and therefore never implemented the corner case of ECN getting set in the outer header and the inner header not being ready for it. Section 4.2. Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. This patch moves the ECN decap logic out of the individual tunnels into a common place. It also adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Overloads rx_frame_error to keep track of ECN related error. Thanks to Chris Wright who caught this while reviewing the new VXLAN tunnel. This code was tested by injecting faulty logic in other end GRE to send incorrectly encapsulated packets. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 9月, 2012 2 次提交
-
-
由 Thierry Escande 提交于
This adds support for socket of type SOCK_RAW to LLCP. sk_buff are copied and sent to raw sockets with a 2 bytes extra header: The first byte header contains the nfc adapter index. The second one contains flags: - 0x01 - Direction (0=RX, 1=TX) - 0x02-0x80 - Reserved A raw socket has to be explicitly bound to a nfc adapter. This is achieved by specifying the adapter index to be bound to in the dev_idx field of the sockaddr_nfc_llcp struct passed to bind(). Signed-off-by: NThierry Escande <thierry.escande@linux.intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Salter 提交于
Commit d97b46a6 ("syscalls, x86: add __NR_kcmp syscall" ) added a new syscall to support checkpoint restore. It is currently x86-only, but that restriction will be removed in a subsequent patch. Unfortunately, the kernel checksyscalls script had a bug which suppressed any warning to other architectures that the kcmp syscall was not implemented. A patch to checksyscalls is being tested in linux-next and other architectures are seeing warnings about kcmp being unimplemented. This patch adds __NR_kcmp to <asm-generic/unistd.h> so that kcmp is wired in for architectures using the generic syscall list. Signed-off-by: NMark Salter <msalter@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 25 9月, 2012 18 次提交
-
-
由 Mark Salter 提交于
Commit 1ad75b9e ("c/r: prctl: add minimal address test to PR_SET_MM") added some address checking to prctl_set_mm() used by checkpoint-restore. This causes a build error for no-MMU systems: kernel/sys.c: In function 'prctl_set_mm': kernel/sys.c:1868:34: error: 'mmap_min_addr' undeclared (first use in this function) The test for mmap_min_addr doesn't make a lot of sense for no-MMU code as noted in commit 6e141546 ("NOMMU: Optimise away the {dac_,}mmap_min_addr tests"). This patch defines mmap_min_addr as 0UL in the no-MMU case so that the compiler will optimize away tests for "addr < mmap_min_addr". Signed-off-by: NMark Salter <msalter@redhat.com> Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: <stable@vger.kernel.org> [3.6.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Waldemar Rymarkiewicz 提交于
xmit callback provided by a driver encapsulates upper layers data and sends it to the hardware. So, HCI does not know the exact amount of data being sent and thus can't handle partially sent frames properly. Therefore, the driver must return 0 for completely sent frame or negative for failure. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Acked-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Eric Lapuyade 提交于
The previous shdlc HCI driver and its header are removed from the tree. PN544 now registers directly with HCI and passes the name of the llc it requires (shdlc). HCI instantiation now allocates the required llc instance. The llc is started when the HCI device is brought up. Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Eric Lapuyade 提交于
This is used by HCI drivers such as the one for the pn544 which require communications between HCI and the chip to use shdlc. Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Eric Lapuyade 提交于
This is a passthrough llc. It can be used by HCI drivers that don't need link layer control. HCI will then write directly to the driver, and driver will deliver incoming frames directly to HCI without any processing. Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Eric Lapuyade 提交于
The LLC layer manages modules that control the link layer protocol (such as shdlc) between HCI and an HCI driver. The driver must simply specify the required llc when it registers with HCI. Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Eric Lapuyade 提交于
This enables the completion callback to be called from a different context, preventing a possible deadlock if the callback resulted in the invocation of a nested call to the currently locked nfc_dev. This is also more in line with the im_transceive nfc_ops for NFC Core or NCI drivers which already behave asynchronously. Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Eric Lapuyade 提交于
This method initiates execution of an HCI cmd. Result will be delivered through an asynchronous callback. Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Tejun Heo 提交于
NFC is using a number of custom ordered workqueues w/ WQ_MEM_RECLAIM. WQ_MEM_RECLAIM is unnecessary unless NFC is gonna be used as transport for storage device, and all use cases match one work item to one ordered workqueue - IOW, there's no actual ordering going on at all and using system_nrt_wq gives the same behavior. There's nothing to be gained by using custom workqueues. Use system_nrt_wq instead and drop all the custom ones. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Ilan Elias 提交于
During NFC-DEP target activation, store the remote general bytes to be used later in dep_link_up. When dep_link_up is called, activate the NFC-DEP target, and forward the remote general bytes. When dep_link_down is called, deactivate the target. Signed-off-by: NIlan Elias <ilane@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Ilan Elias 提交于
Signed-off-by: NIlan Elias <ilane@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Ilan Elias 提交于
If initiator protocol is NFC-DEP, set the local general bytes in nci_start_poll. Signed-off-by: NIlan Elias <ilane@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Daniel Borkmann 提交于
SKF_AD_ALU_XOR_X has been added a while ago, but as an 'ancillary' operation that is invoked through a negative offset in K within BPF load operations. Since BPF_MOD has recently been added, BPF_XOR should also be part of the common ALU operations. Removing SKF_AD_ALU_XOR_X might not be an option since this is exposed to user space. Signed-off-by: NDaniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We currently use a per socket order-0 page cache for tcp_sendmsg() operations. This page is used to build fragments for skbs. Its done to increase probability of coalescing small write() into single segments in skbs still in write queue (not yet sent) But it wastes a lot of memory for applications handling many mostly idle sockets, since each socket holds one page in sk->sk_sndmsg_page Its also quite inefficient to build TSO 64KB packets, because we need about 16 pages per skb on arches where PAGE_SIZE = 4096, so we hit page allocator more than wanted. This patch adds a per task frag allocator and uses bigger pages, if available. An automatic fallback is done in case of memory pressure. (up to 32768 bytes per frag, thats order-3 pages on x86) This increases TCP stream performance by 20% on loopback device, but also benefits on other network devices, since 8x less frags are mapped on transmit and unmapped on tx completion. Alexander Duyck mentioned a probable performance win on systems with IOMMU enabled. Its possible some SG enabled hardware cant cope with bigger fragments, but their ndo_start_xmit() should already handle this, splitting a fragment in sub fragments, since some arches have PAGE_SIZE=65536 Successfully tested on various ethernet devices. (ixgbe, igb, bnx2x, tg3, mellanox mlx4) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: NVijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marek Vasut 提交于
The license header was missing in micrel_phy.h . This patch adds one. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marek Vasut 提交于
There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marek Vasut 提交于
The KSZ8021 PHY was previously caught by KS8051, which is not correct. This PHY needs additional setup if it is strapped for address 0. In such case an reserved bit must be written in the 0x16, "Operation Mode Strap Override" register. According to the KS8051 datasheet, that bit means "PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021. The issue where the ethernet controller (Freescale FEC) did not communicate with network is fixed by writing this bit as 1. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
All callers provide a non-NULL scm argument. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 9月, 2012 3 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch adds the NFQA_CAP_LEN attribute that allows us to know what is the real packet size from user-space (even if we decided to retrieve just a few bytes from the packet instead of all of it). Security software that inspects packets should always check for this new attribute to make sure that it is inspecting the entire packet. This also helps to provide a workaround for the problem described in: http://marc.info/?l=netfilter-devel&m=134519473212536&w=2 Original idea from Florian Westphal. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch allows the FTP helper to pickup the sequence tracking from the first packet seen. This is useful to fix the breakage of the first FTP command after the failover while using conntrackd to synchronize states. The seq_aft_nl_num field in struct nf_ct_ftp_info has been shrinked to 16-bits (enough for what it does), so we can use the remaining 16-bits to store the flags while using the same size for the private FTP helper data. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
Currently, if you want to do something like: "match Monday, starting 23:00, for two hours" You need two rules, one for Mon 23:00 to 0:00 and one for Tue 0:00-1:00. The rule: --weekdays Mo --timestart 23:00 --timestop 01:00 looks correct, but it will first match on monday from midnight to 1 a.m. and then again for another hour from 23:00 onwards. This permits userspace to explicitly ignore the day transition and match for a single, continuous time period instead. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 23 9月, 2012 9 次提交
-
-
由 David S. Miller 提交于
Suggested by Jan Engelhardt. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jozsef Kadlecsik 提交于
Exceptions can now be matched and we can branch according to the possible cases: a. match in the set if the element is not flagged as "nomatch" b. match in the set if the element is flagged with "nomatch" c. no match i.e. iptables ... -m set --match-set ... -j ... iptables ... -m set --match-set ... --nomatch-entries -j ... ... Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-
由 Jozsef Kadlecsik 提交于
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-
由 Jozsef Kadlecsik 提交于
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-
由 Jozsef Kadlecsik 提交于
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-
由 Neal Cardwell 提交于
When taking SYNACK RTT samples for servers using TCP Fast Open, fix the code to ensure that we only call tcp_valid_rtt_meas() after we receive the ACK that completes the 3-way handshake. Previously we were always taking an RTT sample in tcp_v4_syn_recv_sock(). However, for TCP Fast Open connections tcp_v4_conn_req_fastopen() calls tcp_v4_syn_recv_sock() at the time we receive the SYN. So for TFO we must wait until tcp_rcv_state_process() to take the RTT sample. To fix this, we wait until after TFO calls tcp_v4_syn_recv_sock() before we set the snt_synack timestamp, since tcp_synack_rtt_meas() already ensures that we only take a SYNACK RTT sample if snt_synack is non-zero. To be careful, we only take a snt_synack timestamp when a SYNACK transmit or retransmit succeeds. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
In preparation for adding another spot where we compute the SYNACK RTT, extract this code so that it can be shared. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
There has been some confusion among PHC driver authors about the intended purpose of the clock_name attribute. This patch expands the documation in order to clarify how the clock_name field should be understood. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
PTP Hardware Clock devices appear as class devices in sysfs. This patch changes the registration API to use the parent device, clarifying the clock's relationship to the underlying device. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2012 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
Since (9f00d977 netlink: hide struct module parameter in netlink_kernel_create), linux/netlink.h includes linux/module.h because of the use of THIS_MODULE. Use linux/export.h instead, as suggested by Stephen Rothwell, which is significantly smaller and defines THIS_MODULES. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2012 2 次提交
-
-
由 Mathias Krause 提交于
The current code fails to ensure that the netlink message actually contains as many bytes as the header indicates. If a user creates a new state or updates an existing one but does not supply the bytes for the whole ESN replay window, the kernel copies random heap bytes into the replay bitmap, the ones happen to follow the XFRMA_REPLAY_ESN_VAL netlink attribute. This leads to following issues: 1. The replay window has random bits set confusing the replay handling code later on. 2. A malicious user could use this flaw to leak up to ~3.5kB of heap memory when she has access to the XFRM netlink interface (requires CAP_NET_ADMIN). Known users of the ESN replay window are strongSwan and Steffen's iproute2 patch (<http://patchwork.ozlabs.org/patch/85962/>). The latter uses the interface with a bitmap supplied while the former does not. strongSwan is therefore prone to run into issue 1. To fix both issues without breaking existing userland allow using the XFRMA_REPLAY_ESN_VAL netlink attribute with either an empty bitmap or a fully specified one. For the former case we initialize the in-kernel bitmap with zero, for the latter we copy the user supplied bitmap. For state updates the full bitmap must be supplied. To prevent overflows in the bitmap length calculation the maximum size of bmp_len is limited to 128 by this patch -- resulting in a maximum replay window of 4096 packets. This should be sufficient for all real life scenarios (RFC 4303 recommends a default replay window size of 64). Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Martin Willi <martin@revosec.ch> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Acked-by: NH.K. Jerry Chu <hkchu@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-