The widget connections of ADC of ALC880 and ALC2260 aren't initialized,
thus it might point to invalid pin.  This can be a problem when mode=auto
and there is only one input pin.  Then user can't change the connection
at all.

This patch adds the code to initialize the input pin connection of these
codecs.

Reference: Novell bnc#594363
	https://bugzilla.novell.com/show_bug.cgi?id=594363Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Corrected HP and mic pins for ALC269vb amic and dmic models.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC269vb has an alternative HP pin 0x21 in addition.
Fix the parser to recognize it.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds support for the Medion WIM2160 soundcard.
There's no PCI quirk added because it has the same PCI id as the
Medion MD2.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Assign DACs properly to each output.  Currently, the front output is bound
to HP/speaker outputs blindly, but they should be assigned to individual
DACs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 6a4f2ccb introduced a wrong
comparision for the array range check, which effectively skips the whole
initialization of DAC connections.  Fixed now.

Reference: bko#15689
	https://bugzilla.kernel.org/show_bug.cgi?id=15689Reported-by: NAdrian Ulrich <kernel@blinkenlights.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After more tests it appears that EAPD needs to be enabled
on both the 0x14 and 0x15 NIDs to enable the main speaker
and headphone amplifiers. The maximum volume setting is
now equal to what the machine achieves under other operating
systems.
Disabling Front or LFE playback triggers EAPD and disables
the amplifier. As such, these two playback switches have
been removed from the mixer.
Signed-off-by: NTony Vroon <tony@linx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device needs MSI disablement.  Added to the quirk list.
Reported-by: NHarald Dunkel <harri@afaics.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/551606

The OR's hardware distorts at PCM 100% because it does not correspond to
0 dB. Fix this in patch_ad1981() for all models using the Thinkpad
quirk.

Reported-by: Jane Silber
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new helper, snd_hda_codec_update_cache(), for reducing the unneeded
verbs.  This function checks the cached value and skips if it's identical
with the given one.  Otherwise it works like snd_hda_codec_write_cache().

The alc269 code uses this function as an example.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some HP laptops have a mute LED that is controlled over the unused
MIC2 VREF pin.  Implement the LED updater like patch_sigmatel.c for this
model.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC269 codec has a few different variants, and each of them may have
different ADC and MUX widgets.  For example, one model has ADC 0x08
with MUX 0x23 while others has ADC 0x09 or ADC 0x07 with MUX 022 or
0x24.  The difference of ADC appears usually as the capability of
the digital mic pin (0x12), and the current driver sometimes misses
the internal mic pin due to the mismatching ADC.

This patch adds a bit more clever way to find the matching ADC instead
of the static list.  Now the driver checks all active input pins and
fills only the ADC/MUX's that contain all of them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The values should be in 8 bits.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The mask and value parameters passed to snd_hda_codec_amp_stereo()
should be 8-bit values for mute and volume.  Passing AMP_IN_MUTE() is
wrong, which is found in many places in patch_realtek.c as a left-over
from the conversion to snd_hda_codec_amp_stereo().
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=575669

The OR states that position_fix=1 is necessary to work around glitching
during volume adjustments using PulseAudio.
Reported-by: NCarlos Laviola <claviola@debian.org>
Tested-by: NCarlos Laviola <claviola@debian.org>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The probe_only module parameter skips the codec initialization, too.
Remove the model=hwio code and use second bit in probe_only to
skip the HDA codec reset procedure.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

For Lenovo Thinkpad T61/X61, the analog beep input is connected
to node 0x20, index 3. Move the digital beep mute/volume controls
as "Digital Beep" and create analog beep controls for mentioned node.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Using the 'model=hwio' option, the driver bypasses any codec
initialization and the reset procedure for codecs is also
bypassed. This mode is usefull to enable direct access using
hwdep interface (using hdaverb or hda-analyzer tools) and
retain codec setup from BIOS.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Skip initialization of connections of DAC widgets that aren't used,
which resulted in invalid verb parameters.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that the EHCI driver copes with small iso packets without blowing
up, take the snd-ua101 driver out of the alpha-test stage.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Commit 45575f5a ("ppc64 sys_ipc breakage in 2.6.34-rc2") fixed the
definition of the sys_ipc() helper, but didn't fix the prototype in
<linux/syscalls.h>
Reported-and-tested-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: console: Check if port is valid in resize_console
  virtio: console: Generate a kobject CHANGE event on adding 'name' attribute

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (38 commits)
  ip_gre: include route header_len in max_headroom calculation
  if_tunnel.h: add missing ams/byteorder.h include
  ipv4: Don't drop redirected route cache entry unless PTMU actually expired
  net: suppress lockdep-RCU false positive in FIB trie.
  Bluetooth: Fix kernel crash on L2CAP stress tests
  Bluetooth: Convert debug files to actually use debugfs instead of sysfs
  Bluetooth: Fix potential bad memory access with sysfs files
  netfilter: ctnetlink: fix reliable event delivery if message building fails
  netlink: fix NETLINK_RECV_NO_ENOBUFS in netlink_set_err()
  NET_DMA: free skbs periodically
  netlink: fix unaligned access in nla_get_be64()
  tcp: Fix tcp_mark_head_lost() with packets == 0
  net: ipmr/ip6mr: fix potential out-of-bounds vif_table access
  KS8695: update ksp->next_rx_desc_read at the end of rx loop
  igb: Add support for 82576 ET2 Quad Port Server Adapter
  ixgbevf: Message formatting cleanups
  ixgbevf: Shorten up delay timer for watchdog task
  ixgbevf: Fix VF Stats accounting after reset
  ixgbe: Set IXGBE_RSC_CB(skb)->DMA field to zero after unmapping the address
  ixgbe: fix for real_num_tx_queues update issue
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  edac, mce: Filter out invalid values

alloc_skb() can return NULL.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It seems clear from the surrounding code that xpermits is allowed to be
NULL here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I chased down a fail on ppc64 on 2.6.34-rc2 where an application that
uses shared memory was getting a SEGV.

Commit baed7fc9 ("Add generic sys_ipc
wrapper") changed the second argument from an unsigned long to an int.
When we call shmget the system call wrappers for sys_ipc will sign
extend second (ie the size) which truncates it.  It took a while to
track down because the call succeeds and strace shows the untruncated
size :)

The patch below changes second from an int to an unsigned long which
fixes shmget on ppc64 (and I assume s390, sparc64 and mips64).
Signed-off-by: NAnton Blanchard <anton@samba.org>
--

I assume the function prototypes for the other IPC methods would cause us
to sign or zero extend second where appropriate (avoiding any security
issues). Come to think of it, the syscall wrappers for each method should do
that for us as well.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>