Acked-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Coverity checker spotted that we leak the storage allocated to 'name' in
int driver_add_kobj().  The leak looks legit to me - this is the code :

int driver_add_kobj(struct device_driver *drv, struct kobject *kobj,
                    const char *fmt, ...)
{
        va_list args;
        char *name;
        int ret;

        va_start(args, fmt);
        name = kvasprintf(GFP_KERNEL, fmt, args);
        ^^^^^^^^ This dynamically allocates space...

        va_end(args);

        if (!name)
                return -ENOMEM;

        return kobject_add(kobj, &drv->p->kobj, "%s", name);
	^^^^^^^^ This neglects to free the space allocated
}

Inside kobject_add() a copy of 'name' will be made and used.  As far as I can
see, Coverity is correct in flagging this as a leak, but I'd like some
configmation before the patch is applied.

This should fix it.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

write_err is an unsigned long used with set_bit() so should not be passed
around as unsigned int.

http://bugzilla.kernel.org/show_bug.cgi?id=10271Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/memstick/host/tifm_ms.c: In function 'tifm_ms_data_event':
drivers/memstick/host/tifm_ms.c:185: warning: 'p_off' may be used uninitialized in this function

Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

# reboot
...
[   42.351266] Flash device refused suspend due to active operation (state 0)
[   42.358195] Unable to handle kernel NULL pointer dereference at virtual address 00000078
[   42.360060] pgd = c7d9c000
[   42.362769] [00000078] *pgd=a7d8d031, *pte=00000000, *ppte=00000000
[   42.372902] Internal error: Oops: 17 [#1]
[   42.376911] Modules linked in:
[   42.379980] CPU: 0    Not tainted  (2.6.25-rc2-10642-ge8f2594-dirty #73)
[   42.380000] PC is at physmap_flash_shutdown+0x28/0x54
...
[   42.380000] Backtrace:
[   42.380000] [<c0130c1c>] (physmap_flash_shutdown+0x0/0x54) from [<c01207c0>] (platform_drv_shutdown+0x20/0x24)
[   42.380000]  r5:28121969 r4:c0229e08
[   42.380000] [<c01207a0>] (platform_drv_shutdown+0x0/0x24) from [<c011cd40>] (device_shutdown+0x60/0x88)
[   42.380000] [<c011cce0>] (device_shutdown+0x0/0x88) from [<c003e8a4>] (kernel_restart_prepare+0x2c/0x3c)
[   42.380000]  r4:00000000
[   42.380000] [<c003e878>] (kernel_restart_prepare+0x0/0x3c) from [<c003ea00>] (kernel_restart+0x14/0x48)
[   42.380000] [<c003e9ec>] (kernel_restart+0x0/0x48) from [<c003fdc0>] (sys_reboot+0xe8/0x1f8)
[   42.380000]  r4:01234567
[   42.380000] [<c003fcd8>] (sys_reboot+0x0/0x1f8) from [<c001aa00>] (ret_fast_syscall+0x0/0x2c)
[   42.380000]  r7:00000058 r6:00000004 r5:00000001 r4:00000000
[   42.380000] Code: 0a000009 e7953004 e1a00003 e1a0e00f (e593f078)
[   42.650051] ---[ end trace 6d6c26a0fc3141de ]---
Segmentation fault
INIT: no more processes left in this runlevel

While looping for mtd[i]s, we should stop at the mtd[i] == NULL.

This patch also removes unnecessary "if (info)" checks:
suspend/resume/shutdown ops are executed only if probe() is succeeded, so info
is guaranteed to be !NULL.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix regression in dm-crypt introduced in commit
3a7f6c99 ("dm crypt: use async crypto").

If write requests need to be split into pieces, the code must not process them
in parallel because the crypto context cannot be shared.  So there can be
parallel crypto operations on one part of the write, but only one write bio
can be processed at a time.

This is not optimal and the workqueue code needs to be optimized for parallel
processing, but for now it solves the problem without affecting the
performance of synchronous crypto operation (most of current dm-crypt users).

http://bugzilla.kernel.org/show_bug.cgi?id=10242
http://bugzilla.kernel.org/show_bug.cgi?id=10207Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

blackfin video driver: fix bug when opening/reading/mmaping BF54x and BF52x framebuffer simultaneously

http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3974

opening/reading/mmaping BF54x and BF52x framebuffer simultaneously triggers
BUG: failure at mm/nommu.c:470/add_nommu_vma() Add VM_SHARED to the default
vm_flags
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- Allocate pseudo_palette together with fbinfo
- Code cleanup
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 3c0a654e and
fixes kernel bug #10245:

	http://bugzilla.kernel.org/show_bug.cgi?id=10245

The HP Compaq nc6120 has the same PCI sub-device ID as the nx6110, and the
SMBus is used by ACPI for thermal management on the nc6120, so Linux should
not attach a native driver to it.  This means that this quirk is unsafe and
has to be removed.

I also added a comment to help developers realize that adding new IDs to this
SMBus unhiding quirk table should be done only with great care, and in
particular only after checking that ACPI is not making use of the SMBus.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Tomasz Koprowski <tomek@koprowski.org>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following patch allows ixp4xx-beeper to be loaded by udev
automatically when compiled as a module with kernel versions 2.4.24 and
greater.

This patch is required because 43cc71ee
("platform: prefix MODALIAS with "platform:"") changed the modalias
string to have the extra prefix.

LKG7102D7:~# udevinfo -a -p /sys/devices/platform/ixp4xx-beeper.4

 looking at device '/devices/platform/ixp4xx-beeper.4':
   KERNEL=="ixp4xx-beeper.4"
   SUBSYSTEM=="platform"
   DRIVER==""
   ATTR{modalias}=="platform:ixp4xx-beeper"

udev therefore tries to modprobe platform:ixp4xx-beeper instead of
ixp4xx-beeper.

LKG7102D7:~# udevtest /sys/devices/platform/ixp4xx-beeper.4
...
import_uevent_var: import into environment: 'PHYSDEVBUS=platform'
import_uevent_var: import into environment: 'MODALIAS=platform:ixp4xx-beeper'
main: looking at device '/devices/platform/ixp4xx-beeper.4' from
subsystem 'platform'
wait_for_sysfs: file '/sys/devices/platform/ixp4xx-beeper.4/bus'
appeared after 0 loops
main: run: 'socket:/org/kernel/udev/monitor'
main: run: '/sbin/modprobe --use-blacklist platform:ixp4xx-beeper'

With this patch, depmod adds an alias line (see below) to
modules.alias which allows modprobe to load the right module.

alias platform:ixp4xx-beeper ixp4xx-beeper
Signed-off-by: NGordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/char/drm/ati_pcigart.c: In function 'drm_ati_pcigart_init':
drivers/char/drm/ati_pcigart.c:125: warning: format '%08X' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'

Cc: Dave Airlie <airlied@linux.ie>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This has been forgotten in commit f5bbdacc ("[MTD] NAND Modularize
read function") and nobody compiled the driver.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joern Engel <joern@wh.fh-wedel.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because of a typo in iwch_accept_cr(), the cxgb3 connection handling
code programs the hardware IRD (incoming RDMA read queue depth) with
the value that is passed in for the ORD (outgoing RDMA read queue
depth).  In particular this means that if an application passes in IRD
> 0 and ORD = 0 (which is a completely sane and valid thing to do for
an app that expects only incoming RDMA read requests), then the
hardware will end up programmed with IRD = 0 and the app will fail in
a mysterious way.

Fix this by using "ep->ird" instead of "ep->ord" in the intended place.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert commit 1192aeb9 ("ACPI:
drivers/acpi: elide a non-zero test on a result that is never 0")
because it turns out that thermal_cooling_device_register() does
actually return NULL if CONFIG_THERMAL is turned off (then the routine
turns into a dummy inline routine in the header files that returns NULL
unconditionally).

This was found with randconfig testing, causing a crash during bootup:

  initcall 0x78878534 ran for 13 msecs: acpi_button_init+0x0/0x51()
  Calling initcall 0x78878585: acpi_fan_init+0x0/0x2c()
  BUG: unable to handle kernel NULL pointer dereference at 00000000
  IP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd
  *pde = 00000000
  Oops: 0000 [#1]
  Modules linked in:

  Pid: 1, comm: swapper Not tainted (2.6.25-rc7-sched-devel.git-x86-latest.git #14)
  EIP: 0060:[<782b8ad0>] EFLAGS: 00010246 CPU: 0
  EIP is at acpi_fan_add+0x7d/0xfd
  EAX: b787c718 EBX: b787c400 ECX: b782ceb4 EDX: 00000007
  ESI: 00000000 EDI: b787c6f4 EBP: b782cee0 ESP: b782cecc
   DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
  Process swapper (pid: 1, ti=b782c000 task=b7846000 task.ti=b782c000)
  Stack: b787c459 00000000 b787c400 78790888 b787c60c b782cef8 782b6fb8 ffffffda
         b787c60c 00000000 78790958 b782cf0c 783005d7 b787c60c 78790958 78790584
         b782cf1c 783007f6 b782cf28 00000000 b782cf40 782ffc4a 78790958 b794d558
  Call Trace:
   [<782b6fb8>] ? acpi_device_probe+0x3e/0xdb
   [<783005d7>] ? driver_probe_device+0x82/0xfc
   [<783007f6>] ? __driver_attach+0x3a/0x70
   [<782ffc4a>] ? bus_for_each_dev+0x3e/0x60
   [<7830048c>] ? driver_attach+0x14/0x16
   [<783007bc>] ? __driver_attach+0x0/0x70
   [<7830006a>] ? bus_add_driver+0x9d/0x1b0
   [<783008c3>] ? driver_register+0x47/0xa3
   [<7813db00>] ? timespec_to_ktime+0x9/0xc
   [<782b7331>] ? acpi_bus_register_driver+0x3a/0x3c
   [<78878592>] ? acpi_fan_init+0xd/0x2c
   [<78863656>] ? kernel_init+0xac/0x1f9
   [<788635aa>] ? kernel_init+0x0/0x1f9
   [<78114563>] ? kernel_thread_helper+0x7/0x10
   =======================
  Code: 6e 78 e8 57 44 e7 ff 58 e9 93 00 00 00 8b 55 f0 8d bb f4 02 00 00 80 4b 2d 10 8b 03 e8 87 cb ff ff 8d 83 18 03 00 00 80 63 2d ef <ff> 35 00 00 00 00 50 68 e8 9c 6e 78 e8 22 44 e7 ff b9 b6 9c 6e
  EIP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd SS:ESP 0068:b782cecc
  ---[ end trace 778e504de7e3b1e3 ]---
  Kernel panic - not syncing: Attempted to kill init!
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Took some cycles to re-read the Lguest Journey end-to-end, fix some
rot and tighten some phrases.

Only comments change.  No new jokes, but a couple of recycled old jokes.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

lguest doesn't have features, it has puppies!
Signed-off-by: NTimothy R Ansell <mithro@mithis.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Make sure to call unregister_virtio_device() when a virtio device is removed.
Otherwise, virtio_pci.ko cannot be rmmod'd.

This was spotted by Marcelo Tosatti.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The function thermal_cooling_device_register always returns either a valid
pointer or a value made with ERR_PTR, so a test for non-zero on the result
will always succeed.

The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)

//<smpl>
@a@
expression E, E1;
statement S,S1;
position p;
@@

E = thermal_cooling_device_register(...)
... when != E = E1
if@p (E) S else S1

@n@
position a.p;
expression E,E1;
statement S,S1;
@@

E = NULL
... when != E = E1
if@p (E) S else S1

@depends on !n@
expression E;
statement S,S1;
position a.p;
@@

* if@p (E)
  S else S1
//</smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This reverts commit 8fa5913d, which
caused various interesting problems for people, including wrong resource
allocations.  See for example bugzilla entry "2.6.25-rc2: ohci1394
problem (MMIO broken)" at

	http://bugzilla.kernel.org/show_bug.cgi?id=10080

And Gary Hade says:

 "The same change had also exposed an issue reported by Paul Martin that
  has been causing an Oops while hotplugging ThinkPads to a ThinkPad
  Dock II.  See

	http://lkml.org/lkml/2008/2/19/405
	http://bugzilla.kernel.org/show_bug.cgi?id=9961

  I have a fix for the ThinkPad docking Oops but if the issue being
  discussed here is caused by the transparent bridge sizing removal
  change I totally agree that it should be reverted."

  The transparent bridge sizing removal change was motivated by
  insufficient PCI memory resource for a transparent bridge window that
  was being created as a result of expansion ROM(s) being included in
  the transparent bridge sizing calculations.

  A later "PCI: Remove default PCI expansion ROM memory allocation"
  change ( re: http://lkml.org/lkml/2007/12/11/361 ) removes the
  expansion ROM(s) from the transparent bridge sizing calculations which
  actually resolves the original issue in a different manner.  So, even
  if the "PCI: remove transparent bridge sizing" is not problematic it
  is no longer needed anyway."
Identified-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Tested-by: NThomas Meyer <thomas@m3y3r.de>
Acked-by: NGary Hade <garyhade@us.ibm.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have been printing these messages at KERN_ERR since 2.6.24,
per http://bugzilla.kernel.org/show_bug.cgi?id=9535

But KERN_ERR pops up on a console booted with "quiet"
and causes users to get alarmed and file bugs
about the message itself:
https://bugzilla.redhat.com/show_bug.cgi?id=436589

So reduce the severity of these messages to
KERN_WARNING, which is not printed by "quiet".

This message will still be seen without "quiet",
but a lot of messages are printed in that mode
and it will be less likely to cause undue alarm.

We could go all the way to KERN_DEBUG, but this
is a real warning after all, so it seems prudent
not to require "debug" to see it.
Signed-off-by: NLen Brown <len.brown@intel.com>

commit 9b12e18c
'ACPI: cpuidle: Support C1 idle time accounting'
was implicated in a 100% C0 idle regression.
http://bugzilla.kernel.org/show_bug.cgi?id=10076

It pointed out a potential problem where the menu governor
may get confused by the C-state residency time from poll
idle or C1 idle, where this timing info is not accurate.
This inaccuracy is due to interrupts being handled
before we account for C-state exit.

Do not mark TIME_VALID for CO poll state.
Mark C1 time as valid only with the MWAIT (CSTATE_FFH) entry method.

This makes governors use the timing information only when it is correct and
eliminates any wrong policy decisions that may result from invalid timing
information.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

cpuidle C-state sysfs node time and usage are very easy to overflow because
they are all of unsigned int type, time will overflow within about two hours,
usage will take longer time to overflow, but they are increasing for ever.

This patch will convert them to unsigned long long.
Signed-off-by: NYi Yang <yi.y.yang@intel.com>
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This original patch
http://ussg.iu.edu/hypermail/linux/kernel/0712.2/1451.html
was intending to add acpi_unlazy_tlb() to acpi_idle_enter_bm(),
which is used for C3 entry.

But it was merged incorrectly as commmit

bde6f5f5
'x86: voluntary leave_mm before entering ACPI C3'

so the call was instead added to acpi_idle_enter_simple()
(which is C2 entry routine), probably due to identical
context in that function.

Move the call back to acpi_idle_enter_bm().
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

- Handling TX completions on the same cpu as the sender.
Signed-off-by: NSurjit Reang <surjit.reang@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Some ROMs on embedded devices store incorrect values for
the PHY address of the ethernet device.
It looks like the number is sign-extended.
Truncate the value by applying the PHY-address mask to it.
The patch was tested on a bcm47xx embedded system (where the bug
triggers) and a bcm4400 PCI card.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

According to: Documentation/networking/netdevices.txt:

<cite>
napi->poll:
..........
	Context: softirq
	         will be called with interrupts disabled by netconsole.
</cite>

napi->poll() could be called either with interrupts enabled
(in softirq context) or disabled (by netconsole), so the irq flag
should be preserved.

Inspired by Ingo's resent forcedeth patch :-)
Signed-off-by: NMarin Mitov <mitov@issp.bas.bg>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When query for OID_GEN_PHYSICAL_MEDIUM fails, uninitialized pointer
'phym' is being accessed in generic_rndis_bind(), resulting OOPS.
Patch fixes phym to be initialized and setup correctly when
rndis_query() for physical medium fails.

Bug was introduced by following commit:
commit 039ee17d
Author: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date:   Sun Jan 27 23:34:33 2008 +0200
Reported-by: NDmitri Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Using iWARP with a Chelsio T3 NIC generates the following lockdep warning:

    =================================
    [ INFO: inconsistent lock state ]
    2.6.25-rc6 #50
    ---------------------------------
    inconsistent {softirq-on-W} -> {in-softirq-W} usage.
    swapper/0 [HC0[0]:SC1[1]:HE0:SE0] takes:
     (&adap->sge.reg_lock){-+..}, at: [<ffffffff880e5ee2>] cxgb_offload_ctl+0x3af/0x507 [cxgb3]

The problem is that reg_lock is used with plain spin_lock() in
drivers/net/cxgb3/sge.c but is used with spin_lock_irqsave() in
drivers/net/cxgb3/cxgb3_offload.c.  This is technically a false
positive, since the uses in sge.c are only in the initialization and
cleanup paths and cannot overlap with any use in interrupt context.

The best fix is probably just to use spin_lock_irq() with reg_lock in
sge.c.  Even though it's not strictly required for correctness, it
avoids triggering lockdep and the extra overhead of disabling
interrupts is not important at all in the initialization and cleanup
slow paths.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Indicate that HEA calculates IPv4 checksums only
Signed-off-by: NThomas Klein <tklein@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The Hirose USB-100 adapter uses a dm9601 chip.
Reported by Robert Brockway.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Marvell PHY m88e1111 (not sure about other models, but think they too)
works in two modes: fiber and copper. In Marvell PHY driver (that we
have in current community kernels) code supported only copper mode,
and this is not configurable, bits for copper mode are simply written
in registers during PHY initialization.

This patch adds support for both modes.
Signed-off-by: NAlexandr Smirnov <asmirnov@ru.mvista.com>
Acked-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Don't count rx dropped packets based on return value of netif_receive_skb(),
which is misleading.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Tested-by: NVernon Mauery <mauery@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

o eliminate tx lock in netxen adapter struct, instead pound on netdev
  tx lock appropriately.
o remove old "concurrent transmit" code that unnecessarily drops and
  reacquires tx lock in hard_xmit_frame(), this is already serialized
  the netdev xmit lock.
o reduce scope of tx lock in tx cleanup. tx cleanup operates on
  different section of the ring than transmitting cpus and is
  guarded by producer and consumer indices. This fixes a race
  caused by rx softirq preemption on realtime kernels.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Tested-by: NVernon Mauery <mauery@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

o separate and simpler irq handler for msi interrupts, avoids few checks
  than legacy mode.
o avoid redudant tx_has_work() and rx_has_work() checks in interrupt
  and napi, which can uncork irq based on racy (lockless) access to tx
  and rx ring indices. If we get interrupt, there's sufficient reason to
  schedule napi.
o replenish rx ring more often, remove self-imposed threshold rcv_free
  that prevents posting rx desc to card. This improves performance in
  low memory.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Tested-by: NVernon Mauery <mauery@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Recent netxen firmware has new scheme of generating MSI interrupts, it
raises interrupt and blocks itself, waiting for driver to unmask. This
reduces chance of spurious interrupts.

The driver will be able to deal with older firmware as well.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Tested-by: NVernon Mauery <mauery@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Nicolas Pitre <nico@cam.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The variable num_group_tail_writes is initialized but never used otherwise.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
identifier i;
constant C;
@@

(
extern T i;
|
- T i;
  <+... when != i
- i = C;
  ...+>
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>