When a raid5 (or raid6) array is being reshaped to have fewer devices,
conf->raid_disks is the latter and hence smaller number of devices.
However sometimes we want to use a number which is the total number of
currently required devices - the larger of the 'old' and 'new' sizes.
Before we implemented reducing the number of devices, this was always
'new' i.e. ->raid_disks.
Now we need max(raid_disks, previous_raid_disks) in those places.

This particularly affects assembling an array that was shutdown while
in the middle of a reshape to fewer devices.

md.c needs a similar fix when interpreting the md metadata.
Signed-off-by: NNeilBrown <neilb@suse.de>

Signed-off-by: NNeilBrown <neilb@suse.de>

The percpu conversion allowed a straightforward handoff of stripe
processing to the async subsytem that initially showed some modest gains
(+4%).  However, this model is too simplistic and leads to stripes
bouncing between raid5d and the async thread pool for every invocation
of handle_stripe().  As reported by Holger this can fall into a
pathological situation severely impacting throughput (6x performance
loss).

By downleveling the parallelism to raid_run_ops the pathological
stripe_head bouncing is eliminated.  This version still exhibits an
average 11% throughput loss for:

	mdadm --create /dev/md0 /dev/sd[b-q] -n 16 -l 6
	echo 1024 > /sys/block/md0/md/stripe_cache_size
	dd if=/dev/zero of=/dev/md0 bs=1024k count=2048

...but the results are at least stable and can be used as a base for
further multicore experimentation.
Reported-by: NHolger Kiehl <Holger.Kiehl@dwd.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

drivers/md/unroll.pl replaced by awk script to drop build-time
dependency on perl
Signed-off-by: NVladimir Dronnikov <dronnikov@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

and replace with vfs_fsync which is much neater (but wasn't exported,
or even in existence at the time the code was written).

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNeilBrown <neilb@suse.de>

Both raid1 and raid10 create a mempool during startup.
If the 'alloc' function for this mempool fails, unplug_slaves
is called.
If that happens when the pool is being initialised, unplug_slaves
will try to use the 'conf' structure that isn't filled in yet, and
badness will happen.

So ensure that unplug_slaves doesn't get called unless we know
that the conf structure if fully initialised.
Signed-off-by: NNeilBrown <neilb@suse.de>

Deallocating a raid5_conf_t structure requires taking 'device_lock'.
Ensure it is initialized before it is used, i.e. initialize the lock
before attempting any further initializations that might fail.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

During 'check' of a raid1 or raid10 it is possible for the management
thread to spend a lot of time running 'memcmp' on blocks from
different devices, so make sure the thread has a chance to schedule.
raid5d already has a cond_resched (in process_stripe).
Reported-By: NLee Howard <faxguy@howardsilvan.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

This reverts commit df10cfbc.

This patch was based on a misunderstanding and risks introducing a busy-wait loop.
So revert it.
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

drivers/usb/serial/sierra.c: In function 'sierra_suspend':
drivers/usb/serial/sierra.c:936: error: 'struct usb_device' has no member named 'auto_pm'

Repairs

commit e6929a90
Author: Oliver Neukum <oliver@neukum.org>
Date:   Fri Sep 4 23:19:53 2009 +0200

    USB: support for autosuspend in sierra while online

Cc: Greg KH <greg@kroah.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In this case, the calls to request_mem_region, ioremap, and
release_mem_region all have a consistent length argument, len, but since
in other files (res->end - res->start) + 1, equivalent to
resource_size(res), is used for a resource-typed structure res, one could
consider whether the same should be done here.

The problem was found using the following semantic patch:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct resource *res;
@@

- (res->end - res->start) + 1
+ resource_size(res)

@@
struct resource *res;
@@

- res->end - res->start
+ BAD(resource_size(res))
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The allocation may fail.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

id_reg.if_mode might be unitialized when (*mrq)->error is nonzero.  move
dev_dbg() inside the if so that we are sure we can use id_reg values.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c
and edac_pci.c.

They all use a wait_for_completion() scheme, but this scheme it not 100%
safe on multiple CPUs.  See the _rcu_barrier() implementation which
explains why extra precausion is needed.

The patch adds a comment about rcu_barrier() and as a precausion calls
rcu_barrier().  A maintainer needs to look at removing the
wait_for_completion code.

[dougthompson@xmission.com: remove the wait_for_completion code]
Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A driver for the Intel 3200 and 3210 memory controllers.  It has only had
light testing so far, and currently makes no attempt to decode error
addresses at anything finer than csrow granularity.
Signed-off-by: NJason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the function resource_size, which reduces the chance of introducing
off-by-one errors in calculating the resource size.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct resource *res;
@@

- (res->end - res->start) + 1
+ resource_size(res)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the Freescale MPC83xx memory controller to the existing
driver for the Freescale MPC85xx memory controller.  The only difference
between the two processors are in the CS_BNDS register parsing code, which
has been changed so it will work on both processors.

The L2 cache controller does not exist on the MPC83xx, but the OF
subsystem will not use the driver if the device is not present in the OF
device tree.

I had to change the nr_pages calculation to make the math work out.  I
checked it on my board and did the math by hand for a 64GB 85xx using 64K
pages.  In both cases, nr_pages * PAGE_SIZE comes out to the correct
value.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Based on Kumar's new compatible types patch, add P2020 into MPC85xx EDAC
compatible lists so that EDAC can recognize P2020 meomry controller and L2
cache controller and export the relevant fields to sysfs.

EDAC MPC85xx DDR3 support is needed if DDR3 memory stick is installed on a
P2020DS board so that EDAC core can recognize DDR3 memory type.
Signed-off-by: NYang Shi <yang.shi@windriver.com>
Acked-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's unused.

It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.

It _was_ used in two places at arch/frv for some reason.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The on-chip OTP may be written at runtime, so enable support for it in the
driver.  However, since writing should really be done only on development
systems, don't bend over backwards to make sure the simple software lock
is per-fd -- per-device is OK.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver memory maps the UV Hub RTC.
Signed-off-by: NDimitri Sivanich <sivanich@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If DownLoad.ProductCode == MAX_PRODUCT, that would be a problem when we do
RIOBootTable[DownLoad.ProductCode] a couple lines down.

Found by smatch (http://repo.or.cz/w/smatch.git).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).

With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value.  This results in
wrong periodicity for the interrupts.  For, periodic interrupts to work,
following steps are necessary, in that order.

* Set config with Tn_VAL_SET_CNF bit

* Write to hidden accumulator, the value written is the time when the
  first interrupt should be generated

* Write compartor with period interval for subsequent interrupts
  (http://www.intel.com/hardwaredesign/hpetspec_1.pdf )

When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.

Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts.  This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NNils Carlson <nils.carlson@ericsson.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check whether index is within bounds before grabbing the element.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In read_zero, we check for access_ok() once for the count bytes.  It is
unnecessarily checked again in clear_user.  Use __clear_user, which does
not check for access_ok().
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

input: fix build failures caused by Kconfig Winbond WPCD376I Consumer IR hardware driver Kconfig entry

Fix these warnings:

  drivers/built-in.o: In function `apanel_remove':
  apanel.c:(.text+0x56e852): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `apanel_probe':
  apanel.c:(.text+0x56eae3): undefined reference to `led_classdev_register'
  drivers/built-in.o: In function `acpi_fujitsu_hotkey_add':
  fujitsu-laptop.c:(.text+0x5d7647): undefined reference to `led_classdev_register'
  fujitsu-laptop.c:(.text+0x5d76b5): undefined reference to `led_classdev_register'
  drivers/built-in.o: In function `wbcir_probe':
  winbond-cir.c:(.devinit.text+0x5f375): undefined reference to `led_classdev_register'
  winbond-cir.c:(.devinit.text+0x5f663): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `wbcir_remove':
  winbond-cir.c:(.devexit.text+0x7f23): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `fujitsu_cleanup':
  fujitsu-laptop.c:(.exit.text+0xbe37): undefined reference to `led_classdev_unregister'
  fujitsu-laptop.c:(.exit.text+0xbe53): undefined reference to `led_classdev_unregister'

It happens because the new INPUT_WINBOND_CIR driver relies on new-leds
infrastructure - but does not select it in drivers/input/misc/Kconfig.
But it selects LEDS_CLASS, which confuses a number of other drivers into
thinking that all the leds infrastructure is in place.

Fix this by selecting NEW_LEDS as well, like similar drivers do.

Eventually, this whole leds infrastructure complexity should be
cleaned up, it's been going on for years.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

set_cpus_allowed() is on the way out; replace it with
set_cpus_allowed_ptr().

Reference: http://lkml.org/lkml/2008/11/6/448Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

When power is applied to the ltc4245 chip it sometimes reports spurious
faults, which are exposed as alarms in the hwmon output. Clear the fault
register when the driver is installed to clear the alarms.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

When power is applied to the ltc4215 chip it sometimes reports spurious
faults. The faults are not yet exposed via sysfs, however it may be useful
for userspace to read the fault register directly with the i2cget command.
Clear the fault register when the driver is installed so userspace doesn't
have to worry about spurious fault indications.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add Lynnfield processor support. Lynnfield is a quad-core Nehalem
based microprocessor for Desktop market, which is introduced in
September 2009.
Signed-off-by: NHuaxu Wan <huaxu.wan@linux.intel.com>
Signed-off-by: NKent Liu <kent.liu@linux.intel.com>
Acked-by: NRudolf Marek <r.marek@assembler.cz>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Following patch adds support for mobile Penryn CPUs. Intel documents this
poorly. I asked the Coretemp author for some help. This is totally untested and
may not work. Please test!
Signed-off-by: NRudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@linux.intel.com>
Cc: Kent Liu <kent.liu@linux.intel.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fix Atom CPUs support. Intel documents TjMax at 90 degrees C but
some Atoms may have 125 degrees C (this is undocumented speculation).
Signed-off-by: NRudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@linux.intel.com>
Cc: Kent Liu <kent.liu@linux.intel.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The legacy fscpos and fscher drivers have been replaced by the unified
fschmd driver. The transition period is over now, we can delete them.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NHans de Goede <hdegoede@redhat.com>

The ADM1030/ADM1031 chips have temperature offset registers, for both the
local and remote temperature sensors. Following the example set forth in
the LM90/ADM1032 driver, expose the offset registers to userspace.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fix new kernel-doc warnings in serial_core.[hc] files.

  Warning(include/linux/serial_core.h:485): No description found for parameter 'uport'
  Warning(include/linux/serial_core.h:485): Excess function parameter 'port' description in 'uart_handle_dcd_change'
  Warning(include/linux/serial_core.h:511): No description found for parameter 'uport'
  Warning(include/linux/serial_core.h:511): Excess function parameter 'port' description in 'uart_handle_cts_change'
  Warning(drivers/serial/serial_core.c:2437): No description found for parameter 'uport'
  Warning(drivers/serial/serial_core.c:2437): Excess function parameter 'port' description in 'uart_add_one_port'
  Warning(drivers/serial/serial_core.c:2509): No description found for parameter 'uport'
  Warning(drivers/serial/serial_core.c:2509): Excess function parameter 'port' description in 'uart_remove_one_port'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Debora Velarde <debora@linux.vnet.ibm.com>
Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: Marcel Selhorst <m.selhorst@sirrix.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

The patch enables the driver to be used on platforms such as ARM where an
I/O address is a 32-bit memory address.

The patch avoids the following kernel oops:

debian:~# modprobe sisfb
[   73.070000] sisfb: Video ROM found
[   73.080000] sisfb: Video RAM at 0x80000000, mapped to 0xe0a00000, size 1024k
[   73.090000] sisfb: MMIO at 0x84080000, mapped to 0xe0b80000, size 256k
[   73.090000] sisfb: Memory heap starting at 800K, size 32K
[   73.360000] Unable to handle kernel paging request at virtual address 6e000844
[   73.380000] pgd = df230000
[   73.380000] [6e000844] *pgd=00000000
[   73.380000] Internal error: Oops: 8f5 [#1]
[   73.380000] Modules linked in: sisfb(+) fb cfbcopyarea cfbimgblt cfbfillrect
[   73.380000] CPU: 0    Not tainted  (2.6.31-iop32x #1)
[   73.380000] PC is at SiS_SetRegANDOR+0x10/0x38 [sisfb]
[   73.380000] LR is at SiS_SetSCLKHigh+0x38/0x94 [sisfb]
[   73.380000] pc : [<bf01dc00>]    lr : [<bf0238f8>]    psr: 60000013
[   73.380000] sp : df38fd00  ip : 6e000000  fp : 00000002
[   73.380000] r10: 00000108  r9 : 00000000  r8 : 00000108
[   73.380000] r7 : df064258  r6 : 00000110  r5 : 6e000844  r4 : 0000010a
[   73.380000] r3 : 00000001  r2 : 0000000e  r1 : 00000011  r0 : 00000844
[   73.380000] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   73.380000] Control: 0000397f  Table: bf230000  DAC: 00000015
[   73.380000] Process modprobe (pid: 1849, stack limit = 0xdf38e270)
[   73.380000] Stack: (0xdf38fd00 to 0xdf390000)
[   73.380000] fd00: 0000010a 00000108 df064258 df064258 df064258 00000000 00000000 bf02c4e0
[   73.380000] fd20: 00000114 bf02c50c 00000013 00000114 0000010a df064258 00000000 bf02c980
[   73.380000] fd40: 00009c66 00000004 00000001 df064250 a0010000 a6a2a0a0 df064250 00000003
[   73.380000] fd60: df064250 00000000 df064258 0000fffd 00000000 00000000 00000000 bf033948
[   73.380000] fd80: 00000000 00000000 00000000 bf019e2c 00000000 df064a70 bf03b470 00010000
[   73.380000] fda0: 00000000 df064250 00000000 df831c00 00000012 bf039f70 00000000 c00abed8
[   73.380000] fdc0: 000008a6 000008a4 df0649b0 df064878 df064258 df064000 00000000 00000000
[   73.380000] fde0: 00000001 00008000 00000001 00030000 df81c930 bf049f88 df831c00 00000000
[   73.380000] fe00: bf049f58 df3952a0 c0447708 bf049f88 bf049fe0 c0191980 df831c00 c0191b10
[   73.380000] fe20: df831c58 bf049f58 df831c00 bf04aca8 df3952a0 df831c58 df831c58 bf049f88
[   73.380000] fe40: c01ba1b4 c01ba0a0 df831c58 df831c8c bf049f88 c01ba1b4 df3952a0 00000000
[   73.380000] fe60: c03e265c c01ba240 00000000 df38fe78 bf049f88 c01b990c df812938 df81b8d0
[   73.380000] fe80: df3952a0 df807780 00000000 00000060 bf049f88 c01b9224 bf0429c8 00000000
[   73.380000] fea0: bf049f58 00000000 bf049f88 00000000 00000000 bf04aea8 00000000 c01ba4e4
[   73.380000] fec0: e09861a0 bf049f58 00000000 bf049f88 00000000 c0191f20 00000000 00000000
[   73.380000] fee0: c03f7bac bf04d418 0000fff2 0000fff1 bf04ad08 0002f260 0002f260 e0986038
[   73.380000] ff00: e0986150 e098568b df143340 e0990280 00000036 c03d8b00 fffffffd 00000000
[   73.380000] ff20: bf04acfc 00000000 fffffffc 0003cf4b 00018098 c03f7bac 00000000 bf04d000
[   73.380000] ff40: df38e000 00000000 bedc0984 c00272a4 ffffffff c005bc88 00000000 00000000
[   73.380000] ff60: 0003cf4b 0003cf4b 00018098 bf04acfc 00000000 c0027fe8 df38e000 00000000
[   73.380000] ff80: bedc0984 c006882c 00001000 00000003 00000000 00009064 00000000 00008edc
[   73.380000] ffa0: 00000080 c0027e20 00009064 00000000 4014e000 0003cf4b 00018098 0003cf4b
[   73.380000] ffc0: 00009064 00000000 00008edc 00000080 00000000 00000000 40025000 bedc0984
[   73.380000] ffe0: 00000000 bedc08fc 0000b6b0 400e8f34 60000010 4014e000 00000000 00000000
[   73.380000] [<bf01dc00>] (SiS_SetRegANDOR+0x10/0x38 [sisfb]) from [<df064258>] (0xdf064258)
[   73.380000] Code: e92d0030 e20110ff e280546e e3a0c46e (e5c51000)
[   73.680000] ---[ end trace 62a93e01df37a5f2 ]---
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>