cpu_sibling_mask() is not defined unless CONFIG_SMP is defined, so it
must not be used directly in the code without ifdef protection.

To solve the problem and avoid ifdefs in the code, define
for_each_sibling() and use it instead.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a generic mmio clocksource, covering both 32-bit and 16-bit register
access sizes, for up or down counters.  This can be used to easily
create clocksources for simple counter-based implementations.

Cc: Alessandro Rubini <rubini@unipv.it>
Cc: Colin Cross <ccross@android.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Erik Gilling <konkers@android.com>
Acked-by: N"Hans J. Koch" <hjk@hansjkoch.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: linux-omap@vger.kernel.org
Acked-by: NNicolas Pitre <nico@fluxnic.net>
Cc: Olof Johansson <olof@lixom.net>
Tested-by: NSascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NTony Lindgren <tony@atomide.com>
Reviewed-by: NViresh Kumar <viresh.kumar@st.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

apm_mutex is locked by a process (e.g. apm -s) at the start of apm_ioctl() and
remains locked while pm_suspend() is called. Any subsequent process trying to
ACK the suspend (e.g. apmd) is then blocked at the start of apm_ioctl(),
causing the suspend to be delayed for 5 seconds in apm_suspend_notifier()
while the ACK times out. In short, ACKs don't work.

The driver's data structures are sufficiently protected by assorted locks. And
pm_suspend() has its own mutex to prevent reentrancy. Consequently there is no
obvious requirement for apm_mutex, which evolved from earlier BKL calls. So
let's remove it.
Signed-off-by: NPaul Parsons <lost.distance@yahoo.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Recent trivial fix corrected 'occured', but left 'reqest'.
codespell needs another dictionary entry.

cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch sorts the defs for the MT_CLS. I choose to split
generic classes and device specific ones to be able to add
more generic classes in the future.

It also put eGalax devices at their right place (alphabetically)
in mt_devices.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '<linux/prefetch.h>' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include <linux/?a'
 		echo '#include <linux/prefetch.h>'
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================
Signed-off-by: NPaul <paul.gortmaker@windriver.com>
[ Fixed up some incorrect #include placements, and added some
  non-network drivers and the fib_trie.c case    - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

replace function calls when possible call in both irq/non-irq contexts
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

s/NETDEV_BONDING_DESLAVE/NETDEV_RELEASE/ as Andy suggested.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Neil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

V3: rename NETDEV_ENSLAVE to NETDEV_JOIN

Currently we do nothing when we enslave a net device which is running netconsole.
Neil pointed out that we may get weird results in such case, so let's disable
netpoll on the device being enslaved. I think it is too harsh to prevent
the device being ensalved if it is running netconsole.

By the way, this patch also removes the NETDEV_GOING_DOWN from netconsole
netdev notifier, because netpoll will check if the device is running or not
and we don't handle NETDEV_PRE_UP neither.

This patch is based on net-next-2.6.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Neil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unicast frames between macvlan interfaces in bridge mode are not otherwise
sent to network taps on the lowerdev (as all other macvlan frames are), so
forward the frames to the receive queue of the lowerdev first.
Signed-off-by: NDavid Ward <david.ward@ll.mit.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '<linux/prefetch.h>' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include <linux/?a'
 		echo '#include <linux/prefetch.h>'
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================
Signed-off-by: NPaul <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Casting to u32 warns anyways.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use the costly dmi_name_in_vendors() when we know the string we
are looking for can only be in the DMI board name field. This is more
robust and, more importantly, much faster.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

In the commit 28eb5f27, aer_osc_setup is removed but corresponding
definiton information in the aerdrv.h is missed.
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NChen Gong <gong.chen@linux.intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Requested by Greg KH to fix a race condition in the creating of PCI bus
cpuaffinity files.
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

After remove the device from /sys, we have to rescan all or
find out the bridge and access /sys../device/rescan there.

this patch add /sys/.../pci_bus/.../rescan. So user can rescan more easy.
that is more clean and easy to understand.

like after remove 0000:c4:00.0, you can rescan 0000:c4 directly.

-v2: According to Jesse, use function instead of exposing attr, so could hide
	#ifdef in header file.
     also add code to remove rescan file in remove path.
-v3: GregKH pointed out that we should use dev_attrs to avoid racing.
     So add pcibus_attrs and make it to be member of pcibus_attrs.
-v4: Change name to pcibus_dev_attrs according to GregKH
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

With Ram's fixes, this should be safe to do again.  So let's give it
another try.

BIOS separates IO ranges between several IOHs, and on some slots, BIOS
assigns resources to a bridge, but stops assigning resources to the
device under that bridge, because the device needs a big resource.

So:
1. allocate resources and record the failed device resources
2. clear the BIOS assigned resources of the parent bridge of failing device
3. go back and call pci assign unassigned
4. if it still fails, go up the tree, clear more bridges. and try again

Now Ram's allocate requested resource already got into mainline. could
put this one again.
Reviewed-by: NRam Pai <linuxram@us.ibm.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

For KVM device assignment, we'd like to save off the state of a device
prior to passing it to the guest and restore it later.  We also want
to allow pci_reset_funciton() to be called while the device is owned
by the guest.  This however overwrites and invalidates the struct pci_dev
buffers, so we can't just manually call save and restore.  Add generic
interfaces for the saved state to be stored and reloaded back into
struct pci_dev at a later time.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This will allow us to store and load it later.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Need to use it in _e1000e_disable_aspm.  This routine is used for error
recovery, where the pci_bus_sem is already held, and we don't want
pci_disable_link_state to try to take it again.  So add a locked variant
for use in cases like this.

Found lock up:

[ 2374.654557] kworker/32:1    D ffff881027f6b0f0     0  6075      2 0x00000000
[ 2374.654816]  ffff88503f099a68 0000000000000046 ffff88503f098000 0000000000004000
[ 2374.654837]  00000000001d1ec0 ffff88503f099fd8 00000000001d1ec0 ffff88503f099fd8
[ 2374.654860]  0000000000004000 00000000001d1ec0 ffff88503dcc8000 ffff88503f090000
[ 2374.654880] Call Trace:
[ 2374.654898]  [<ffffffff810b1302>] ? __lock_acquired+0x3a/0x224
[ 2374.654914]  [<ffffffff81c2b59c>] ? _raw_spin_unlock_irq+0x30/0x36
[ 2374.654925]  [<ffffffff810b069d>] ? trace_hardirqs_on_caller+0x1f/0x178
[ 2374.654936]  [<ffffffff81c2ab24>] rwsem_down_failed_common+0xd3/0x103
[ 2374.654945]  [<ffffffff810b158f>] ? __lock_contended+0x3a/0x2a2
[ 2374.654955]  [<ffffffff81c2ab7b>] rwsem_down_read_failed+0x12/0x14
[ 2374.654967]  [<ffffffff813371e4>] call_rwsem_down_read_failed+0x14/0x30
[ 2374.654981]  [<ffffffff8135df20>] ? pci_disable_link_state+0x5f/0xf5
[ 2374.654990]  [<ffffffff81c2a0e6>] ? down_read+0x7e/0x91
[ 2374.654999]  [<ffffffff8135df20>] ? pci_disable_link_state+0x5f/0xf5
[ 2374.655008]  [<ffffffff8135df20>] pci_disable_link_state+0x5f/0xf5
[ 2374.655024]  [<ffffffff81661796>] e1000e_disable_aspm+0x55/0x5a
[ 2374.655037]  [<ffffffff816677eb>] e1000_io_slot_reset+0x59/0xea
[ 2374.655048]  [<ffffffff8135fe0d>] ? report_mmio_enabled+0x5d/0x5d
[ 2374.655057]  [<ffffffff8135fe3b>] report_slot_reset+0x2e/0x5d
[ 2374.655072]  [<ffffffff8135369e>] pci_walk_bus+0x8a/0xb7
[ 2374.655081]  [<ffffffff8135fe0d>] ? report_mmio_enabled+0x5d/0x5d
[ 2374.655091]  [<ffffffff813603be>] broadcast_error_message+0xa4/0xb2
[ 2374.655101]  [<ffffffff81352c71>] ? pci_bus_read_config_dword+0x72/0x80
[ 2374.655110]  [<ffffffff813606df>] do_recovery+0x9e/0xf9
[ 2374.655120]  [<ffffffff81360786>] handle_error_source+0x4c/0x51
[ 2374.655129]  [<ffffffff81360974>] aer_isr_one_error+0x1e9/0x21a
[ 2374.655138]  [<ffffffff81360a6c>] aer_isr+0xc7/0xcc
[ 2374.655147]  [<ffffffff813609a5>] ? aer_isr_one_error+0x21a/0x21a
[ 2374.655159]  [<ffffffff81096d9f>] process_one_work+0x237/0x3ec
[ 2374.655168]  [<ffffffff81096d10>] ? process_one_work+0x1a8/0x3ec
[ 2374.655178]  [<ffffffff8109728d>] worker_thread+0x17c/0x240
[ 2374.655186]  [<ffffffff810b0803>] ? trace_hardirqs_on+0xd/0xf
[ 2374.655196]  [<ffffffff81097111>] ? manage_workers+0xab/0xab
[ 2374.655209]  [<ffffffff8109c8ed>] kthread+0xa0/0xa8
[ 2374.655223]  [<ffffffff81c332d4>] kernel_thread_helper+0x4/0x10
[ 2374.655232]  [<ffffffff81c2b880>] ? retint_restore_args+0xe/0xe
[ 2374.655243]  [<ffffffff8109c84d>] ? __init_kthread_worker+0x5b/0x5b
[ 2374.655252]  [<ffffffff81c332d0>] ? gs_change+0xb/0xb

when aer happens,
pci_walk_bus already have down_read(&pci_bus_sem)...
then report_slot_reset
        ==> e1000_io_slot_reset
                ==> e1000e_disable_aspm
                        ==> pci_disable_link_state...

We can not use pci_disable_link_state, and it will try to hold pci_bus_sem again.

Try to have __pci_disable_link_state that will not need to hold pci_bus_sem.

-v2: change name to pci_disable_link_state_locked() according to Jesse.

[jbarnes: make sure new function is exported for modules]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Fix remaining checkpatch errors in the coretemp driver.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Acked-by: NJean Delvare <khali@linux-fr.org>

After the merge of pkgtemp functionality into the coretemp driver,
the pkgtemp driver is no longer necessary. Remove it.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: NJean Delvare <khali@linux-fr.org>

The set_vpp() method provided by physmap passes a map_info back to
the platform code, which has little relevance as far as the platform
is concerned (this parameter is completely unused).

Instead, pass the platform_device, which can be used in the pismo
driver to retrieve some important information in a nicer way, instead
of the hack that was in place.

The empty set_vpp function in board-at572d940hf_ek.c is left untouched,
as the board/SoC is scheduled for removal.

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As there is now no in-tree user of integrator-flash, remove
it completely.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In the process of moving platforms away from integrator-flash
(aka armflash), add to physmap the few features that make
armflash unique:

- optionnal probing for the AFS partition type
- init() and exit() methods, used by Integrator to control
  write access to the various onboard programmable components
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit e66eed65 ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h, which
uncovered several cases that had apparently relied on that rather
obscure header file dependency.

So this fixes things up a bit, using

   grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]')
   grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]')

to guide us in finding files that either need <linux/prefetch.h>
inclusion, or have it despite not needing it.

There are more of them around (mostly network drivers), but this gets
many core ones.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit a35e2c1b (macvlan: use rx_handler_data pointer to store
macvlan_port pointer V2) added a bug in macvlan_port_create()

Steps to reproduce the bug:

# ifenslave bond0 eth0 eth1

# ip link add link eth0 up name eth0#1 type macvlan
->error EBUSY

# ip link add link eth0 up name eth0#1 type macvlan
->panic


Fix: Dont set IFF_MACVLAN_PORT in error case.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Geert Uytterhoeven ran a dependency checker which kicked out this warning:

+ warning: (ACPI_APEI) selects PSTORE which has unmet direct dependencies (MISC_FILESYSTEMS):  => N/A

Randy confirmed that the fix was to "select MISC_FILESYSTEMS" too.
Tested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch merges the pkgtemp with coretemp driver.
The sysfs interfaces for all cores in the same pkg
are shown under one directory, in hwmon. It also
supports CONFIG_HOTPLUG_CPU. So, the sysfs interfaces
are created when each core comes online and are
removed when it goes offline.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
[guenter.roeck@ericsson.com: Fixed section reference errors]
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

Stantum devices used to work with MT_CLS_STANTUM but MT_CLS_CONFIDENCE
is exactly the same. This patch switches them to this generic class,
and remove the unused MT_CLS_STANTUM.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch introduce support for Unitec panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch introduce support for Touch International panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch introduce support for GoodTouch panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch introduce support for CVTouch panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch introduce support for ActionStar panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When hiddev_disconnect() runs with chardev open, it will proceed with
usbhid_close(). When userspace in parallel runs the hiddev_release(),
it sees !hiddev->exists (as it has been already set so by
hiddev_disconnect()) and kfrees hiddev while hiddev_disconnect() hasn't
finished yet.

Serialize the access to hiddev->exists and hiddev->open by existancelock.

Reported-by: mike-@cinci.rr.com
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device reponds with 'invalid report id' when feature report switching it
into multitouch mode is sent to it.

This has been silently ignored before 0825411a ("HID: bt: Wait for ACK
on Sent Reports"), but since this commit, it propagates -EIO from the _raw
callback .

So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's
how the device reacts in normal mode.

Sad, but following reality.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022Tested-by: NChase Douglas <chase.douglas@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>