Using the cached values has less latency for bare metal and
prevents reading back bogus values if the engine is powergated.

This was implemented for VI and SI, but somehow CIK got missed.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable DC for DCE8 APUs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Supported DCE versions: 8.0, 10.0, 11.0, 11.2

v2: rebase against 4.11
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NYong Zhao <yong.zhao@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I couldn't figure out what this was original good for, but we
don't use it any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-4-git-send-email-yamada.masahiro@socionext.com

This patch introduces a new flag named "amdgpu_firmware_load_type" to
handle different firmware loading method. Since Vega10, there are
three ways to load firmware. It would be better to use a flag and a
fw_load_type kernel parameter to configure it.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics use different registers so abstract it.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check whether we need to post rather than whether the asic is
posted.  There are some cases (e.g., GPU reset or resume from
hibernate) where we need to force post even if the asic has
been posted.
Signed-off-by: NJim Qu <Jim.Qu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Call detection function driectly, so remove the interface.

V2: ci and si also need to call the detect function.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use acronym to rename fields to make easy to spell out.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move from asic specific code to common atom code.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This makes it easier to replace specific IP blocks on
asics for handling virtual_dce, DAL, etc. and for building
IP lists for hw or tables.  This also stored the status
information in the same structure.

v2: split out spelling fix into a separate patch
    add a function to add IPs to the list
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1,Changes on virtualization detections
2,Don't load smu & mc firmware if using sr-iov bios
3,skip vPost for sriov & force vPost if dev pass-through

v2: agd: squash in Rays's fix for the missed SI case
v3: agd: squash in additional fixes for CIK, SI, cleanup
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For virtual display feature, as there may be multiple GPUs,
for user could choose whiche GPU need to enable this feature, change
the type of virtual_display from int to char*. The variable will be set
like this virtual_display="xxxx:xx:xx.x;xxxx:xx:xx.x;".
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Put it in one place.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For virtual display feature, if user set the option "amdgpu.virtual_display=1"
when load amdgpu.ko. Then need to set the ip_blocks with virtual display ip
blocks. And when enable virtual display, the amdgpu_dal need to be set to zero.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For virtual display feature, define virtual display ip blocks, and set
dce_virtual_ip_funcs to DCE block.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Found-by: Coccinelle
Signed-off-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add ability to specify instance in select_se_sh callback.
Defaults to 0xffffffff all over the driver.

(v2) Don't enable INSTANCE_BROADCAST by default
(v3) Style changes
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's gfx IP specific, not asic specific, so move to a
gfx callback.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's gfx IP specific, not asic specific, so move to a
gfx callback.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only used in the gmc IP modules so just call the local
function directly.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Re-enable bus mastering after GPU reset. We disable it
at the top of these functions, so balance them by
re-enabling it.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
eviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So we know whether or not the reset succeeded.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When executing in a PCI passthrough based virtuzliation environemnt, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.

However, if we are operating in SR-IOV mode it is up to the GIM driver
to manage the asic state, therefore we should not post the card (and
shouldn't be able to do it either).

v2: add missing semi-colon
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add name that we can print out in kernel messages
to aid in debugging.

v2: drop DAL changes for upstream
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fetch this info once at init and just store the results
for future requests.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

First patch in series to move to user mode
debug tools we're removing the print_status callbacks.

These functions were unused at the moment anyway.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clean up leftover from radeon code.
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop soft reset, always use pci config reset.
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So they can be used by powerplay.
Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pcie registers may not be available in a virtualized
environment.
Reviewed-by: Nmonk liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We'll need this later for pcie dpm.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_pp_ip_funcs is introduced to handle the two code paths,
the legacy one and the new powerplay implementation.

CONFIG_DRM_AMD_POWERPLAY kernel configuration option is
introduced for the powerplay component.

v4: squash in fixes
v3: register debugfs file when powerplay module enable
v2: add amdgpu_ucode_init_bo in hw init when amdgpu_powerplay enable.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Read the vbios image directly from the rom.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure we are not the root device before attempting to
read the pcie bridge registers to check the pcie gen speeed.

Fixes a crash when the device is passed through to a VM.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Make the definitions common for all driver components

v2: fix kfd
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>