* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: more /proc and /sys file support

* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits)
  nfsd: make local functions static
  NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session()
  NFSD: Check status from nfsd4_map_bcts_dir()
  NFSD: Remove setting unused variable in nfsd_vfs_read()
  nfsd41: error out on repeated RECLAIM_COMPLETE
  nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence
  nfsd v4.1 lOCKT clientid field must be ignored
  nfsd41: add flag checking for create_session
  nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly
  nfsd4: fix wrongsec handling for PUTFH + op cases
  nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller
  nfsd4: introduce OPDESC helper
  nfsd4: allow fh_verify caller to skip pseudoflavor checks
  nfsd: distinguish functions of NFSD_MAY_* flags
  svcrpc: complete svsk processing on cb receive failure
  svcrpc: take advantage of tcp autotuning
  SUNRPC: Don't wait for full record to receive tcp data
  svcrpc: copy cb reply instead of pages
  svcrpc: close connection if client sends short packet
  svcrpc: note network-order types in svc_process_calldir
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm kcopyd: return client directly and not through a pointer
  dm kcopyd: reserve fewer pages
  dm io: use fixed initial mempool size
  dm kcopyd: alloc pages from the main page allocator
  dm kcopyd: add gfp parm to alloc_pl
  dm kcopyd: remove superfluous page allocation spinlock
  dm kcopyd: preallocate sub jobs to avoid deadlock
  dm kcopyd: avoid pointless job splitting
  dm mpath: do not fail paths after integrity errors
  dm table: reject devices without request fns
  dm table: allow targets to support discards internally

* 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  SUNRPC: Support for RPC over AF_LOCAL transports
  SUNRPC: Remove obsolete comment
  SUNRPC: Use AF_LOCAL for rpcbind upcalls
  SUNRPC: Clean up use of curly braces in switch cases
  NFS: Revert NFSROOT default mount options
  SUNRPC: Rename xs_encode_tcp_fragment_header()
  nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu()
  nfs41: Correct offset for LAYOUTCOMMIT
  NFS: nfs_update_inode: print current and new inode size in debug output
  NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors
  NFSv4: Handle expired stateids when the lease is still valid
  SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: Fix sanity check patches on big-endian systems

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI EC: remove redundant code
  ACPI: Add D3 cold state
  ACPI: processor: fix processor_physically_present in UP kernel
  ACPI: Split out custom_method functionality into an own driver
  ACPI: Cleanup custom_method debug stuff
  ACPI EC: enable MSI workaround for Quanta laptops
  ACPICA: Update to version 20110413
  ACPICA: Execute an orphan _REG method under the EC device
  ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place
  ACPICA: Update internal address SpaceID for DataTable regions
  ACPICA: Add more methods eligible for NULL package element removal
  ACPICA: Split all internal Global Lock functions to new file - evglock
  ACPI: EC: add another DMI check for ASUS hardware
  ACPI EC: remove dead code
  ACPICA: Fix code divergence of global lock handling
  ACPICA: Use acpi_os_create_lock interface
  ACPI: osl, add acpi_os_create_lock interface
  ACPI:Fix goto flows in thermal-sys

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param
  x86 idle: deprecate "no-hlt" cmdline param
  x86 idle APM: deprecate CONFIG_APM_CPU_IDLE
  x86 idle floppy: deprecate disable_hlt()
  x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it
  x86 idle: clarify AMD erratum 400 workaround
  idle governor: Avoid lock acquisition to read pm_qos before entering idle
  cpuidle: menu: fixed wrapping timers at 4.294 seconds

Commit 1495f230 ("vmscan: change shrinker API by passing
shrink_control struct") changed the API of ->shrink(), but missed ubifs
and cifs instances.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Inspired by an analysis from Hugh on why again all this doesn't explode
in our face.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return client directly from dm_kcopyd_client_create, not through a
parameter, making it consistent with dm_io_client_create.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Reserve just the minimum of pages needed to process one job.

Because we allocate pages from page allocator, we don't need to reserve
a large number of pages.  The maximum job size is SUB_JOB_SIZE and we
calculate the number of reserved pages based on this.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace the arbitrary calculation of an initial io struct mempool size
with a constant.

The code calculated the number of reserved structures based on the request
size and used a "magic" multiplication constant of 4.  This patch changes
it to reserve a fixed number - itself still chosen quite arbitrarily.
Further testing might show if there is a better number to choose.

Note that if there is no memory pressure, we can still allocate an
arbitrary number of "struct io" structures.  One structure is enough to
process the whole request.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch changes dm-kcopyd so that it allocates pages from the main
page allocator with __GFP_NOWARN | __GFP_NORETRY flags (so that it can
fail in case of memory pressure). If the allocation fails, dm-kcopyd
allocates pages from its own reserve.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce a parameter for gfp flags to alloc_pl() for use in following
patches.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove the spinlock protecting the pages allocation.  The spinlock is only
taken on initialization or from single-threaded workqueue.  Therefore, the
spinlock is useless.

The spinlock is taken in kcopyd_get_pages and kcopyd_put_pages.

kcopyd_get_pages is only called from run_pages_job, which is only
called from process_jobs called from do_work.

kcopyd_put_pages is called from client_alloc_pages (which is initialization
function) or from run_complete_job. run_complete_job is only called from
process_jobs called from do_work.

Another spinlock, kc->job_lock is taken each time someone pushes or pops
some work for the worker thread.  Once we take kc->job_lock, we
guarantee that any written memory is visible to the other CPUs.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

There's a possible theoretical deadlock in dm-kcopyd because multiple
allocations from the same mempool are required to finish a request.
Avoid this by preallocating sub jobs.

There is a mempool of 512 entries. Each request requires up to 9
entries from the mempool. If we have at least 57 concurrent requests
running, the mempool may overflow and mempool allocations may start
blocking until another entry is freed to the mempool. Because the same
thread is used to free entries to the mempool and allocate entries from
the mempool, this may result in a deadlock.

This patch changes it so that one mempool entry contains all 9 "struct
kcopyd_job" required to fulfill the whole request. The allocation is
done only once in dm_kcopyd_copy and no further mempool allocations are
done during request processing.

If dm_kcopyd_copy is not run in the completion thread, this
implementation is deadlock-free.

MIN_JOBS needs reducing accordingly and we've chosen to reduce it
further to 8.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Don't split SUB_JOB_SIZE jobs

If the job size equals SUB_JOB_SIZE, there is no point in splitting it.
Splitting it just unnecessarily wastes time, because the split job size
is SUB_JOB_SIZE too.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Integrity errors need to be passed to the owner of the integrity
metadata for processing. Consequently EILSEQ should be passed up the
stack.

Cc: stable@kernel.org
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds a check that a block device has a request function
defined before it is used.  Otherwise, misconfiguration can cause an oops.

Because we are allowing devices with zero size e.g. an offline multipath
device as in commit 2cd54d9b
("dm: allow offline devices") there needs to be an additional check
to ensure devices are initialised.  Some block devices, like a loop
device without a backing file, exist but have no request function.

Reproducer is trivial: dm-mirror on unbound loop device
(no backing file on loop devices)

dmsetup create x --table "0 8 mirror core 2 8 sync 2 /dev/loop0 0 /dev/loop1 0"

and mirror resync will immediatelly cause OOps.

BUG: unable to handle kernel NULL pointer dereference at   (null)
 ? generic_make_request+0x2bd/0x590
 ? kmem_cache_alloc+0xad/0x190
 submit_bio+0x53/0xe0
 ? bio_add_page+0x3b/0x50
 dispatch_io+0x1ca/0x210 [dm_mod]
 ? read_callback+0x0/0xd0 [dm_mirror]
 dm_io+0xbb/0x290 [dm_mod]
 do_mirror+0x1e0/0x748 [dm_mirror]
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Reported-by: NZdenek Kabelac <zkabelac@redhat.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Permit a target to support discards regardless of whether or not all its
underlying devices do.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

le64 values should be swapped when accessing on
big-endian systems.
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

Conflicts:
	drivers/platform/x86/compal-laptop.c

Merge branches 'acpica', 'aml-custom', 'bugzilla-16548', 'bugzilla-20242', 'd3-cold', 'ec-asus' and 'thermal-fix' into release

mwait_idle() is a C1-only idle loop intended to be more efficient
than HLT on SMP hardware that supports it.

But mwait_idle() has been replaced by the more general
mwait_idle_with_hints(), which handles both C1 and deeper C-states.
ACPI uses only mwait_idle_with_hints(), and never uses mwait_idle().

Deprecate mwait_idle() and the "idle=mwait" cmdline param
to simplify the x86 idle code.

After this change, kernels configured with
(!CONFIG_ACPI=n && !CONFIG_INTEL_IDLE=n) when run on hardware
that support MWAIT will simply use HLT.  If MWAIT is desired
on those systems, cpuidle and the cpuidle drivers above
can be used.

cc: x86@kernel.org
cc: stable@kernel.org # .39.x
Signed-off-by: NLen Brown <len.brown@intel.com>

We'd rather that modern machines not check if HLT works on
every entry into idle, for the benefit of machines that had
marginal electricals 15-years ago.  If those machines are still running
the upstream kernel, they can use "idle=poll".  The only difference
will be that they'll now invoke HLT in machine_hlt().

cc: x86@kernel.org # .39.x
Signed-off-by: NLen Brown <len.brown@intel.com>

We don't want to export the pm_idle function pointer to modules.
Currently CONFIG_APM_CPU_IDLE w/ CONFIG_APM_MODULE forces us to.

CONFIG_APM_CPU_IDLE is of dubious value, it runs only on 32-bit
uniprocessor laptops that are over 10 years old.  It calls into
the BIOS during idle, and is known to cause a number of machines
to fail.

Removing CONFIG_APM_CPU_IDLE and will allow us to stop exporting
pm_idle.  Any systems that were calling into the APM BIOS
at run-time will simply use HLT instead.

cc: x86@kernel.org
cc: Jiri Kosina <jkosina@suse.cz>
cc: stable@kernel.org # .39.x
Signed-off-by: NLen Brown <len.brown@intel.com>

Plan to remove floppy_disable_hlt in 2012, an ancient
workaround with comments that it should be removed.

This allows us to remove clutter and a run-time branch
from the idle code.

WARN_ONCE() on invocation until it is removed.

cc: x86@kernel.org
cc: stable@kernel.org # .39.x
Signed-off-by: NLen Brown <len.brown@intel.com>

In the long run, we don't want default_idle() or (pm_idle)() to
be exported outside of process.c.  Start by not exporting them
to modules, unless the APM build demands it.

cc: x86@kernel.org
cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

The workaround for AMD erratum 400 uses the term "c1e" falsely suggesting:
1. Intel C1E is somehow involved
2. All AMD processors with C1E are involved

Use the string "amd_c1e" instead of simply "c1e" to clarify that
this workaround is specific to AMD's version of C1E.
Use the string "e400" to clarify that the workaround is specific
to AMD processors with Erratum 400.

This patch is text-substitution only, with no functional change.

cc: x86@kernel.org
Acked-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

ec->handle is set in ec_parse_device(), so don't bother to set it again.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

_SxW returns an Integer containing the lowest D-state supported in state
Sx. If OSPM has not indicated that it supports _PR3, then the value “3”
corresponds to D3.  If it has indicated _PR3 support, the value “3”
represents D3hot and the value “4” represents D3cold.

Linux does set _OSC._PR3, so we should fix it to expect that _SxW can
return 4.
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Usually, there are multiple processors defined in ACPI table, for
example

    Scope (_PR)
    {
        Processor (CPU0, 0x00, 0x00000410, 0x06) {}
        Processor (CPU1, 0x01, 0x00000410, 0x06) {}
        Processor (CPU2, 0x02, 0x00000410, 0x06) {}
        Processor (CPU3, 0x03, 0x00000410, 0x06) {}
    }

processor_physically_present(...) will be called to check whether those
processors are physically present.

Currently we have below codes in processor_physically_present,

cpuid = acpi_get_cpuid(...);
if ((cpuid == -1) && (num_possible_cpus() > 1))
        return false;
return true;

In UP kernel, acpi_get_cpuid(...) always return -1 and
num_possible_cpus() always return 1, so
processor_physically_present(...) always returns true for all passed in
processor handles.

This is wrong for UP processor or SMP processor running UP kernel.

This patch removes the !SMP version of acpi_get_cpuid(), so both UP and
SMP kernel use the same acpi_get_cpuid function.

And for UP kernel, only processor 0 is valid.

https://bugzilla.kernel.org/show_bug.cgi?id=16548
https://bugzilla.kernel.org/show_bug.cgi?id=16357Tested-by: NAnton Kochkov <anton.kochkov@gmail.com>
Tested-by: NAmbroz Bizjak <ambrop7@gmail.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: debug-mmrs: include RSI_PID[4567] MMRs
  Blackfin: bf51x: fix up RSI_PID# MMR defines
  Blackfin: bf52x/bf54x: fix up usb MMR defines
  Blackfin: debug-mmrs: fix typos with gptimers/mdma/ppi
  Blackfin: gptimers: add structure for hardware register layout
  Blackfin: wire up new sendmmsg syscall
  Blackfin: mach/bfin_serial_5xx.h: punt now-unused header
  Blackfin: bfin_serial.h: turn default port wrappers into stubs

Fix kernel-doc warnings in scsi_proc.c:

  Warning(drivers/scsi/scsi_proc.c:390): No description found for parameter 'dev'
  Warning(drivers/scsi/scsi_proc.c:390): No description found for parameter 'data'
  Warning(drivers/scsi/scsi_proc.c:390): Excess function parameter 's' description in 'always_match'
  Warning(drivers/scsi/scsi_proc.c:390): Excess function parameter 'p' description in 'always_match'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With /sys/kernel/debug/acpi/custom_method root can write
to arbitrary memory and increase his priveleges, even if
these are restricted.

-> Make this an own debug .config option and warn about the
security issue in the config description.

-> Still keep acpi/debugfs.c which now only creates an empty
   /sys/kernel/debug/acpi directory. There might be other
   users of it later.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: rui.zhang@intel.com
Signed-off-by: NLen Brown <len.brown@intel.com>

- Move param aml_debug_output to other params into sysfs.c
- Split acpi_debugfs_init to prepare custom_method to be
  an own .config option and driver.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: rui.zhang@intel.com
Signed-off-by: NLen Brown <len.brown@intel.com>

Enable MSI workaround for Quanta laptops.
https://bugzilla.kernel.org/show_bug.cgi?id=20242Tested-by: NJan-Matthias Braun <jan_braun@gmx.net>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Thanks to the reviews and comments by Rafael, James, Mark and Andi.
Here's version 2 of the patch incorporating your comments and also some
update to my previous patch comments.

I noticed that before entering idle state, the menu idle governor will
look up the current pm_qos target value according to the list of qos
requests received.  This look up currently needs the acquisition of a
lock to access the list of qos requests to find the qos target value,
slowing down the entrance into idle state due to contention by multiple
cpus to access this list.  The contention is severe when there are a lot
of cpus waking and going into idle.  For example, for a simple workload
that has 32 pair of processes ping ponging messages to each other, where
64 cpu cores are active in test system, I see the following profile with
37.82% of cpu cycles spent in contention of pm_qos_lock:

-     37.82%          swapper  [kernel.kallsyms]          [k]
_raw_spin_lock_irqsave
   - _raw_spin_lock_irqsave
      - 95.65% pm_qos_request
           menu_select
           cpuidle_idle_call
         - cpu_idle
              99.98% start_secondary

A better approach will be to cache the updated pm_qos target value so
reading it does not require lock acquisition as in the patch below.
With this patch the contention for pm_qos_lock is removed and I saw a
2.2X increase in throughput for my message passing workload.

cc: stable@kernel.org
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJames Bottomley <James.Bottomley@suse.de>
Acked-by: Nmark gross <markgross@thegnar.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Cpuidle menu governor is using u32 as a temporary datatype for storing
nanosecond values which wrap around at 4.294 seconds. This causes errors
in predicted sleep times resulting in higher than should be C state
selection and increased power consumption. This also breaks cpuidle
state residency statistics.

cc: stable@kernel.org # .32.x through .39.x
Signed-off-by: NTero Kristo <tero.kristo@nokia.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

On one machine I've been getting hangs, a page fault's anon_vma_prepare()
waiting in anon_vma_lock(), other processes waiting for that page's lock.

This is a replay of last year's f1819427 "mm: fix hang on
anon_vma->root->lock".

The new page_lock_anon_vma() places too much faith in its refcount: when
it has acquired the mutex_trylock(), it's possible that a racing task in
anon_vma_alloc() has just reallocated the struct anon_vma, set refcount
to 1, and is about to reset its anon_vma->root.

Fix this by saving anon_vma->root, and relying on the usual page_mapped()
check instead of a refcount check: if page is still mapped, the anon_vma
is still ours; if page is not still mapped, we're no longer interested.
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>