- 14 12月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Now we can have a large udp hash table, udp_lib_get_port() loop should be converted to a do {} while (cond) form, or we dont enter it at all if hash table size is exactly 65536. Reported-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2009 4 次提交
-
-
由 Krishna Kumar 提交于
Fix two problems: 1. If unregister_netdevice_many() is called with both registered and unregistered devices, rollback_registered_many() bails out when it reaches the first unregistered device. The processing of the prior registered devices is unfinished, and the remaining devices are skipped, and possible registered netdev's are leaked/unregistered. 2. System hangs or panics depending on how the devices are passed, since when netdev_run_todo() runs, some devices were not fully processed. Tested by passing intermingled unregistered and registered vlan devices to unregister_netdevice_many() as follows: 1. dev, fake_dev1, fake_dev2: hangs in run_todo ("unregister_netdevice: waiting for eth1.100 to become free. Usage count = 1") 2. fake_dev1, dev, fake_dev2: failure during de-registration and next registration, followed by a vlan driver Oops during subsequent registration. Confirmed that the patch fixes both cases. Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Willi 提交于
Commit 4447bb33 ("xfrm: Store aalg in xfrm_state with a user specified truncation length") breaks installation of authentication algorithms via PF_KEY, as the state specific truncation length is not installed with the algorithms default truncation length. This patch initializes state properly to the default if installed via PF_KEY. Signed-off-by: NMartin Willi <martin@strongswan.org> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiko Carstens 提交于
Use (get|put)_compat_timespec helper functions to simplify the code. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiko Carstens 提交于
compat_sys_recvmmsg has a compat_timespec parameter and not a timespec parameter. This way we also get rid of an odd cast. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2009 4 次提交
-
-
由 John W. Linville 提交于
Update "US" and "JP" for current rules, and replace "EU" rules with the world roaming domain (since it was only a pseudo-domain anyway). Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Javier Cardona 提交于
The patch ("mac80211: Use correct sign for mesh active path refresh.") was actually a bug. Reverted it and improved the explanation of how mesh path refresh works. Signed-off-by: NJavier Cardona <javier@cozybit.com> Signed-off-by: NAndrey Yurovsky <andrey@cozybit.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Javier Cardona 提交于
Paths to mesh portals were being timed out immediately after each use in intermediate forwarding nodes. mppath->exp_time is set to the expiration time so assigning it to jiffies was marking the path as expired. Signed-off-by: NJavier Cardona <javier@cozybit.com> Signed-off-by: NAndrey Yurovsky <andrey@cozybit.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 10 12月, 2009 2 次提交
-
-
由 John W. Linville 提交于
This part was missed in "cfg80211: implement get_wireless_stats", probably because sta_set_sinfo already existed and was only handling dBm signals. Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vivek Natarajan 提交于
When the current_bss is not set, 'iwconfig <iface> key off' does not clear the private flag. Hence after we connect with WEP to an AP and then try to connect with another non-WEP AP, it does not work. This issue will not be seen if supplicant is used. Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 12月, 2009 9 次提交
-
-
由 Ilpo Järvinen 提交于
It can happen, that tcp_retransmit_skb fails due to some error. In such cases we might end up into a state where tp->retrans_out is zero but that's only because we removed the TCPCB_SACKED_RETRANS bit from a segment but couldn't retransmit it because of the error that happened. Therefore some assumptions that retrans_out checks are based do not necessarily hold, as there still can be an old retransmission but that is only visible in TCPCB_EVER_RETRANS bit. As retransmission happen in sequential order (except for some very rare corner cases), it's enough to check the head skb for that bit. Main reason for all this complexity is the fact that connection dying time now depends on the validity of the retrans_stamp, in particular, that successive retransmissions of a segment must not advance retrans_stamp under any conditions. It seems after quick thinking that this has relatively low impact as eventually TCP will go into CA_Loss and either use the existing check for !retrans_stamp case or send a retransmission successfully, setting a new base time for the dying timer (can happen only once). At worst, the dying time will be approximately the double of the intented time. In addition, tcp_packet_delayed() will return wrong result (has some cc aspects but due to rarity of these errors, it's hardly an issue). One of retrans_stamp clearing happens indirectly through first going into CA_Open state and then a later ACK lets the clearing to happen. Thus tcp_try_keep_open has to be modified too. Thanks to Damian Lukowski <damian@tvk.rwth-aachen.de> for hinting that this possibility exists (though the particular case discussed didn't after all have it happening but was just a debug patch artifact). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Damian Lukowski 提交于
This patch moves retransmits_timed_out() from include/net/tcp.h to tcp_timer.c, where it is used. Reported-by: NFrederic Leroy <fredo@starox.org> Signed-off-by: NDamian Lukowski <damian@tvk.rwth-aachen.de> Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
in routed mode, we don't have a hardware address so netdev_ops doesnt need to validate our hardware address via .ndo_validate_addr Reported-by: NManuel Fuentes <mfuentes@agenciaefe.com> Signed-off-by: NChas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
fix oops when initializing lane interfaces. lec should probably be changed to use alloc_netdev() instead. Signed-off-by: NChas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Adds kerneldoc for inet_twsk_unhash() & inet_twsk_bind_unhash(). With help from Randy Dunlap. Suggested-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When we find a timewait connection in __inet_hash_connect() and reuse it for a new connection request, we have a race window, releasing bind list lock and reacquiring it in __inet_twsk_kill() to remove timewait socket from list. Another thread might find the timewait socket we already chose, leading to list corruption and crashes. Fix is to remove timewait socket from bind list before releasing the bind lock. Note: This problem happens if sysctl_tcp_tw_reuse is set. Reported-by: Nkapil dakhane <kdakhane@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
First patch changes __inet_hash_nolisten() and __inet6_hash() to get a timewait parameter to be able to unhash it from ehash at same time the new socket is inserted in hash. This makes sure timewait socket wont be found by a concurrent writer in __inet_check_established() Reported-by: Nkapil dakhane <kdakhane@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
GCC even warns about it, as reported by Andrew Morton: net/ipv4/tcp.c: In function 'do_tcp_getsockopt': net/ipv4/tcp.c:2544: warning: comparison is always false due to limited range of data type Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
I messed up the merge in d7fc02c7, where the conflict in question wasn't just about CTL_UNNUMBERED being removed, but the 'strategy' field is too (sysctl handling is now done through the /proc interface, with no duplicate protocols for reading the data). Reported-by: NLarry Finger <Larry.Finger@lwfinger.net> Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 12月, 2009 4 次提交
-
-
On a 32-bit machine, BIT() macro does not give the required bit value if the bit is mroe than 31. In ieee802_11_parse_elems_crc(), BIT() is suppossed to get the bit value more than 31 (42 (id of ERP_INFO_IE), 37 (CHANNEL_SWITCH_IE), (42), 32 (POWER_CONSTRAINT_IE), 45 (HT_CAP_IE), 61 (HT_INFO_IE)). As we do not get the required bit value for the above IEs, crc over these IEs are never calculated, so any dynamic change in these IEs after the association is not really handled on 32-bit platforms. This patch fixes this issue. Cc: stable@kernel.org Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrew Morton 提交于
net/rfkill/core.c: In function 'rfkill_type_show': net/rfkill/core.c:610: warning: control may reach end of non-void function 'rfkill_get_type_str' being inlined A gcc bug, but simple enough to squish. Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vivek Natarajan 提交于
Not only ps_sdata but also IEEE80211_CONF_PS is to be considered before restoring PS in scan_ps_disable(). For instance, when ps_sdata is set but CONF_PS is not set just because the dynamic timer is still running, a sw scan leads to setting of CONF_PS in scan_ps_disable instead of restarting the dynamic PS timer. Also for the above case, a null data frame is to be sent after returning to operating channel which was not happening with the current implementation. This patch fixes this too. Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Reviewed-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
hwsim testing has revealed that when the MLME recalculates the idle state of the device, it sometimes does so before sending the final deauthentication or disassociation frame. This patch changes the place where the idle state is recalculated, but of course driver transmit is typically asynchronous while configuration is expected to be synchronous, so it doesn't fix all possible cases yet. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 12月, 2009 4 次提交
-
-
由 Johannes Berg 提交于
My patch "mac80211: correctly place aMPDU RX reorder code" uses an skb queue for MPDUs that were released from the buffer. I intentially didn't initialise and use the skb queue's spinlock, but in this place forgot that the code variant that doesn't touch the spinlock is needed. Thanks to Christian Lamparter for quickly spotting the bug in the backtrace Reinette reported. Reported-by: NReinette Chatre <reinette.chatre@intel.com> Bug-identified-by: NChristian Lamparter <chunkeey@googlemail.com> Tested-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kalle Valo 提交于
The regulatory messages in syslog look weird: kernel: cfg80211: Regulatory domain: US kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Indent them with four spaces instead of the tab character to get prettier output. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Acked: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
An earlier optimization on removing unnecessary traffic on cooked monitor interfaces ("mac80211: reduce the amount of unnecessary traffic on cooked monitor interfaces ") ended up removing quite a bit more than just unnecessary traffic. It was not supposed to remove TX status reporting for injected frames, but ended up doing it by checking the injected flag in skb->cb only after that field had been cleared with memset.. Fix this by taking a local copy of the injected flag before skb->cb is cleared. This broke user space applications that depend on getting TX status notifications for injected data frames. For example, STA inactivity poll from hostapd did not work and ended up kicking out stations even if they were still present. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
I've just noticed that some events are no longer propagated for some wireless drivers. Basically, SET request with a extra payload for driver without commit handler. The fix is pretty simple, see attached. Actually, a few lines below this line, you will see that the event generation for simple SET (iwpoint-less ?) is done properly, and this other event generation does not need fixing. Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 12月, 2009 12 次提交
-
-
由 André Goddard Rosa 提交于
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
fix some typos and punctuation in comments Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Eric Dumazet 提交于
After TCP RCU conversion, tw->tw_refcnt should not be set to 1 in inet_twsk_alloc(). It allows a RCU reader to get this timewait socket, while we not yet stabilized it. Only choice we have is to set tw_refcnt to 0 in inet_twsk_alloc(), then atomic_add() it later, once everything is done. Location of this atomic_add() is tricky, because we dont want another writer to find this timewait in ehash, while tw_refcnt is still zero ! Thanks to Kapil Dakhane tests and reports. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Its currently possible that several threads issuing a connect() find the same timewait socket and try to reuse it, leading to list corruptions. Condition for bug is that these threads bound their socket on same address/port of to-be-find timewait socket, and connected to same target. (SO_REUSEADDR needed) To fix this problem, we could unhash timewait socket while holding ehash lock, to make sure lookups/changes will be serialized. Only first thread finds the timewait socket, other ones find the established socket and return an EADDRNOTAVAIL error. This second version takes into account Evgeniy's review and makes sure inet_twsk_put() is called outside of locked sections. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Both netlink and /proc/net/tcp interfaces can report transient negative values for rx queue. ss -> State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB -6 6 127.0.0.1:45956 127.0.0.1:3333 netstat -> tcp 4294967290 6 127.0.0.1:37784 127.0.0.1:3333 ESTABLISHED This is because we dont lock socket while computing tp->rcv_nxt - tp->copied_seq, and another CPU can update copied_seq before rcv_next in RX path. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick Mullaney 提交于
Provide common routine for the transition of operational state for a leaf device during a root device transition. Signed-off-by: NPatrick Mullaney <pmullaney@novell.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
This function walks the whole hashtable so there is no point in passing it a network namespace. Instead I purge all timewait sockets from dead network namespaces that I find. If the namespace is one of the once I am trying to purge I am guaranteed no new timewait sockets can be formed so this will get them all. If the namespace is one I am not acting for it might form a few more but I will call inet_twsk_purge again and shortly to get rid of them. In any even if the network namespace is dead timewait sockets are useless. Move the calls of inet_twsk_purge into batch_exit routines so that if I am killing a bunch of namespaces at once I will just call inet_twsk_purge once and save a lot of redundant unnecessary work. My simple 4k network namespace exit test the cleanup time dropped from roughly 8.2s to 1.6s. While the time spent running inet_twsk_purge fell to about 2ms. 1ms for ipv4 and 1ms for ipv6. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
While we are looking up entries to free there is no reason to take the lock in inet_twsk_purge. We have to drop locks and restart occassionally anyway so adding a few more in case we get on the wrong list because of a timewait move is no big deal. At the same time not taking the lock for long periods of time is much more polite to the rest of the users of the hash table. In my test configuration of killing 4k network namespaces this change causes 4k back to back runs of inet_twsk_purge on an empty hash table to go from roughly 20.7s to 3.3s, and the total time to destroy 4k network namespaces goes from roughly 44s to 3.3s. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Refactor the code so fib_rules_register always takes a template instead of the actual fib_rules_ops structure that will be used. This is required for network namespace support so 2 out of the 3 callers already do this, it allows the error handling to be made common, and it allows fib_rules_unregister to free the template for hte caller. Modify fib_rules_unregister to use call_rcu instead of syncrhonize_rcu to allw multiple namespaces to be cleaned up in the same rcu grace period. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
This allows namespace exit methods to batch work that comes requires an rcu barrier using call_rcu without having to treat the unregister_pernet_operations cases specially. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
xfrm.nlsk is provided by the xfrm_user module and is access via rcu from other parts of the xfrm code. Add xfrm.nlsk_stash a copy of xfrm.nlsk that will never be set to NULL. This allows the synchronize_net and netlink_kernel_release to be deferred until a whole batch of xfrm.nlsk sockets have been set to NULL. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Move network device exit batching from a special case in net_namespace.c to using common mechanisms in dev.c Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-