The PATCH "mm: introduce compaction and migration for virtio ballooned pages"
hacks around putback_lru_pages() in order to allow ballooned pages to be
re-inserted on balloon page list as if a ballooned page was like a LRU page.

As ballooned pages are not legitimate LRU pages, this patch introduces
putback_movable_pages() to properly cope with cases where the isolated
pageset contains ballooned pages and LRU pages, thus fixing the mentioned
inelegant hack around putback_lru_pages().
Signed-off-by: NRafael Aquini <aquini@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory fragmentation introduced by ballooning might reduce significantly
the number of 2MB contiguous memory blocks that can be used within a guest,
thus imposing performance penalties associated with the reduced number of
transparent huge pages that could be used by the guest workload.

This patch introduces a common interface to help a balloon driver on
making its page set movable to compaction, and thus allowing the system
to better leverage the compation efforts on memory defragmentation.

[akpm@linux-foundation.org: use PAGE_FLAGS_CHECK_AT_PREP, s/__balloon_page_flags/page_flags_cleared/, small cleanups]
[rientjes@google.com: allow balloon compaction for any system with memory compaction enabled, which is the defconfig]
Signed-off-by: NRafael Aquini <aquini@redhat.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory fragmentation introduced by ballooning might reduce significantly
the number of 2MB contiguous memory blocks that can be used within a
guest, thus imposing performance penalties associated with the reduced
number of transparent huge pages that could be used by the guest workload.

This patch-set follows the main idea discussed at 2012 LSFMMS session:
"Ballooning for transparent huge pages" -- http://lwn.net/Articles/490114/
to introduce the required changes to the virtio_balloon driver, as well as
the changes to the core compaction & migration bits, in order to make
those subsystems aware of ballooned pages and allow memory balloon pages
become movable within a guest, thus avoiding the aforementioned
fragmentation issue

Following are numbers that prove this patch benefits on allowing
compaction to be more effective at memory ballooned guests.

Results for STRESS-HIGHALLOC benchmark, from Mel Gorman's mmtests suite,
running on a 4gB RAM KVM guest which was ballooning 512mB RAM in 64mB
chunks, at every minute (inflating/deflating), while test was running:

===BEGIN stress-highalloc

STRESS-HIGHALLOC
                 highalloc-3.7     highalloc-3.7
                     rc4-clean         rc4-patch
Pass 1          55.00 ( 0.00%)    62.00 ( 7.00%)
Pass 2          54.00 ( 0.00%)    62.00 ( 8.00%)
while Rested    75.00 ( 0.00%)    80.00 ( 5.00%)

MMTests Statistics: duration
                 3.7         3.7
           rc4-clean   rc4-patch
User         1207.59     1207.46
System       1300.55     1299.61
Elapsed      2273.72     2157.06

MMTests Statistics: vmstat
                                3.7         3.7
                          rc4-clean   rc4-patch
Page Ins                    3581516     2374368
Page Outs                  11148692    10410332
Swap Ins                         80          47
Swap Outs                      3641         476
Direct pages scanned          37978       33826
Kswapd pages scanned        1828245     1342869
Kswapd pages reclaimed      1710236     1304099
Direct pages reclaimed        32207       31005
Kswapd efficiency               93%         97%
Kswapd velocity             804.077     622.546
Direct efficiency               84%         91%
Direct velocity              16.703      15.682
Percentage direct scans          2%          2%
Page writes by reclaim        79252        9704
Page writes file              75611        9228
Page writes anon               3641         476
Page reclaim immediate        16764       11014
Page rescued immediate            0           0
Slabs scanned               2171904     2152448
Direct inode steals             385        2261
Kswapd inode steals          659137      609670
Kswapd skipped wait               1          69
THP fault alloc                 546         631
THP collapse alloc              361         339
THP splits                      259         263
THP fault fallback               98          50
THP collapse fail                20          17
Compaction stalls               747         499
Compaction success              244         145
Compaction failures             503         354
Compaction pages moved       370888      474837
Compaction move failure       77378       65259

===END stress-highalloc

This patch:

Introduce MIGRATEPAGE_SUCCESS as the default return code for
address_space_operations.migratepage() method and documents the expected
return code for the same method in failure cases.
Signed-off-by: NRafael Aquini <aquini@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since we migrate only one hugepage, don't use linked list for passing the
page around.  Directly pass the page that need to be migrated as argument.
This also removes the usage of page->lru in the migrate path.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 2a11c8ea ("kconfig: Introduce IS_ENABLED(),
IS_BUILTIN() and IS_MODULE()") there is a generic grep-friendly method
for checking config options in C expressions.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sparc64 allmodconfig:

In file included from include/linux/compat.h:15,
                 from /usr/src/25/arch/sparc/include/asm/siginfo.h:19,
                 from include/linux/signal.h:5,
                 from include/linux/sched.h:73,
                 from arch/sparc/kernel/asm-offsets.c:13:
include/linux/fs.h:618: warning: parameter has incomplete type

It seems that my sparc64 compiler (gcc-3.4.5) doesn't like the forward
declaration of enums.

Fix this by moving the "enum migrate_mode" definition into its own header
file.
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds a lightweight sync migrate operation MIGRATE_SYNC_LIGHT
mode that avoids writing back pages to backing storage.  Async compaction
maps to MIGRATE_ASYNC while sync compaction maps to MIGRATE_SYNC_LIGHT.
For other migrate_pages users such as memory hotplug, MIGRATE_SYNC is
used.

This avoids sync compaction stalling for an excessive length of time,
particularly when copying files to a USB stick where there might be a
large number of dirty pages backed by a filesystem that does not support
->writepages.

[aarcange@redhat.com: This patch is heavily based on Andrea's work]
[akpm@linux-foundation.org: fix fs/nfs/write.c build]
[akpm@linux-foundation.org: fix fs/btrfs/disk-io.c build]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Asynchronous compaction is used when allocating transparent hugepages to
avoid blocking for long periods of time.  Due to reports of stalling,
there was a debate on disabling synchronous compaction but this severely
impacted allocation success rates.  Part of the reason was that many dirty
pages are skipped in asynchronous compaction by the following check;

	if (PageDirty(page) && !sync &&
		mapping->a_ops->migratepage != migrate_page)
			rc = -EBUSY;

This skips over all mapping aops using buffer_migrate_page() even though
it is possible to migrate some of these pages without blocking.  This
patch updates the ->migratepage callback with a "sync" parameter.  It is
the responsibility of the callback to fail gracefully if migration would
block.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the introduction of the boolean sync parameter, the API looks a
little inconsistent as offlining is still an int.  Convert offlining to a
bool for the sake of being tidy.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm: migration: allow migration to operate asynchronously and avoid synchronous compaction in the faster path

Migration synchronously waits for writeback if the initial passes fails.
Callers of memory compaction do not necessarily want this behaviour if the
caller is latency sensitive or expects that synchronous migration is not
going to have a significantly better success rate.

This patch adds a sync parameter to migrate_pages() allowing the caller to
indicate if wait_on_page_writeback() is allowed within migration or not.
For reclaim/compaction, try_to_compact_pages() is first called
asynchronously, direct reclaim runs and then try_to_compact_pages() is
called synchronously as there is a greater expectation that it'll succeed.

[akpm@linux-foundation.org: build/merge fix]
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

migrate_huge_page_move_mapping() is declared as "extern int ..."
in include/linux/migrate.h for !CONFIG_MIGRATION,
which causes the build error like below:

  mm/mprotect.o: In function `migrate_huge_page_move_mapping':
  mprotect.c:(.text+0x0): multiple definition of `migrate_huge_page_move_mapping'
  mm/shmem.o:shmem.c:(.text+0x0): first defined here
  mm/rmap.o: In function `migrate_huge_page_move_mapping':
  rmap.c:(.text+0x0): multiple definition of `migrate_huge_page_move_mapping'
  mm/shmem.o:shmem.c:(.text+0x0): first defined here
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

This patch extends page migration code to support hugepage migration.
One of the potential users of this feature is soft offlining which
is triggered by memory corrected errors (added by the next patch.)

Todo:
- there are other users of page migration such as memory policy,
  memory hotplug and memocy compaction.
  They are not ready for hugepage support for now.

ChangeLog since v4:
- define migrate_huge_pages()
- remove changes on isolation/putback_lru_page()

ChangeLog since v2:
- refactor isolate/putback_lru_page() to handle hugepage
- add comment about race on unmap_and_move_huge_page()

ChangeLog since v1:
- divide migration code path for hugepage
- define routine checking migration swap entry for hugetlb
- replace "goto" with "if/else" in remove_migration_pte()
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

This patch is the core of a mechanism which compacts memory in a zone by
relocating movable pages towards the end of the zone.

A single compaction run involves a migration scanner and a free scanner.
Both scanners operate on pageblock-sized areas in the zone.  The migration
scanner starts at the bottom of the zone and searches for all movable
pages within each area, isolating them onto a private list called
migratelist.  The free scanner starts at the top of the zone and searches
for suitable areas and consumes the free pages within making them
available for the migration scanner.  The pages isolated for migration are
then migrated to the newly isolated free pages.

[aarcange@redhat.com: Fix unsafe optimisation]
[mel@csn.ul.ie: do not schedule work on other CPUs for compaction]
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

putback_lru_page() never can fail.  So it doesn't matter count of "the
number of pages put back".

In addition, users of this functions don't use return value.

Let's remove unnecessary code.
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The previous patch enables page migration of ksm pages, but that soon gets
into trouble: not surprising, since we're using the ksm page lock to lock
operations on its stable_node, but page migration switches the page whose
lock is to be used for that.  Another layer of locking would fix it, but
do we need that yet?

Do we actually need page migration of ksm pages?  Yes, memory hotremove
needs to offline sections of memory: and since we stopped allocating ksm
pages with GFP_HIGHUSER, they will tend to be GFP_HIGHUSER_MOVABLE
candidates for migration.

But KSM is currently unconscious of NUMA issues, happily merging pages
from different NUMA nodes: at present the rule must be, not to use
MADV_MERGEABLE where you care about NUMA.  So no, NUMA page migration of
ksm pages does not make sense yet.

So, to complete support for ksm swapping we need to make hotremove safe.
ksm_memory_callback() take ksm_thread_mutex when MEM_GOING_OFFLINE and
release it when MEM_OFFLINE or MEM_CANCEL_OFFLINE.  But if mapped pages
are freed before migration reaches them, stable_nodes may be left still
pointing to struct pages which have been removed from the system: the
stable_node needs to identify a page by pfn rather than page pointer, then
it can safely prune them when MEM_OFFLINE.

And make NUMA migration skip PageKsm pages where it skips PageReserved.
But it's only when we reach unmap_and_move() that the page lock is taken
and we can be sure that raised pagecount has prevented a PageAnon from
being upgraded: so add offlining arg to migrate_pages(), to migrate ksm
page when offlining (has sufficient locking) but reject it otherwise.
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wright <chrisw@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

#ifdef in *.c file decrease source readability a bit.  removing is better.

This patch doesn't have any functional change.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On large memory systems, the VM can spend way too much time scanning
through pages that it cannot (or should not) evict from memory.  Not only
does it use up CPU time, but it also provokes lock contention and can
leave large systems under memory presure in a catatonic state.

This patch series improves VM scalability by:

1) putting filesystem backed, swap backed and unevictable pages
   onto their own LRUs, so the system only scans the pages that it
   can/should evict from memory

2) switching to two handed clock replacement for the anonymous LRUs,
   so the number of pages that need to be scanned when the system
   starts swapping is bound to a reasonable number

3) keeping unevictable pages off the LRU completely, so the
   VM does not waste CPU time scanning them. ramfs, ramdisk,
   SHM_LOCKED shared memory segments and mlock()ed VMA pages
   are keept on the unevictable list.

This patch:

isolate_lru_page logically belongs to be in vmscan.c than migrate.c.

It is tough, because we don't need that function without memory migration
so there is a valid argument to have it in migrate.c.  However a
subsequent patch needs to make use of it in the core mm, so we can happily
move it to vmscan.c.

Also, make the function a little more generic by not requiring that it
adds an isolated page to a given list.  Callers can do that.

	Note that we now have '__isolate_lru_page()', that does
	something quite different, visible outside of vmscan.c
	for use with memory controller.  Methinks we need to
	rationalize these names/purposes.	--lts

[akpm@linux-foundation.org: fix mm/memory_hotplug.c build]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NLee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We'd like to support CONFIG_MEMORY_HOTREMOVE on s390, which depends on
CONFIG_MIGRATION.  So far, CONFIG_MIGRATION is only available with NUMA
support.

This patch makes CONFIG_MIGRATION selectable for architectures that define
ARCH_ENABLE_MEMORY_HOTREMOVE.  When MIGRATION is enabled w/o NUMA, the
kernel won't compile because migrate_vmas() does not know about
vm_ops->migrate() and vma_migratable() does not know about policy_zone.
To fix this, those two functions can be restricted to '#ifdef CONFIG_NUMA'
because they are not being used w/o NUMA.  vma_migratable() is moved over
from migrate.h to mempolicy.h.

[kosaki.motohiro@jp.fujitsu.com: build fix]
Acked-by: NChristoph Lameter <cl@linux-foundation.org>
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NKOSAKI Motorhiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Address spaces contain an allocation flag that specifies restriction on the
zone for pages placed in the mapping.  I.e.  some device may require pages
to be allocated from a DMA zone.  Block devices may not be able to use
pages from HIGHMEM.

Memory policies and the common use of page migration works only on the
highest zone.  If the address space does not allow allocation from the
highest zone then the pages in the address space are not migratable simply
because we can only allocate memory for a specified node if we allow
allocation for the highest zone on each node.
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we do not check for vma flags if sys_move_pages is called to move
individual pages.  If sys_migrate_pages is called to move pages then we
check for vm_flags that indicate a non migratable vma but that still
includes VM_LOCKED and we can migrate mlocked pages.

Extract the vma_migratable check from mm/mempolicy.c, fix it and put it
into migrate.h so that is can be used from both locations.

Problem was spotted by Lee Schermerhorn
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Hooks for calling vma specific migration functions

With this patch a vma may define a vma->vm_ops->migrate function.  That
function may perform page migration on its own (some vmas may not contain page
structs and therefore cannot be handled by regular page migration.  Pages in a
vma may require special preparatory treatment before migration is possible
etc) .  Only mmap_sem is held when the migration function is called.  The
migrate() function gets passed two sets of nodemasks describing the source and
the target of the migration.  The flags parameter either contains

MPOL_MF_MOVE	which means that only pages used exclusively by
		the specified mm should be moved

or

MPOL_MF_MOVE_ALL which means that pages shared with other processes
		should also be moved.

The migration function returns 0 on success or an error condition.  An error
condition will prevent regular page migration from occurring.

On its own this patch cannot be included since there are no users for this
functionality.  But it seems that the uncached allocator will need this
functionality at some point.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

move_pages() is used to move individual pages of a process. The function can
be used to determine the location of pages and to move them onto the desired
node. move_pages() returns status information for each page.

long move_pages(pid, number_of_pages_to_move,
		addresses_of_pages[],
		nodes[] or NULL,
		status[],
		flags);

The addresses of pages is an array of void * pointing to the
pages to be moved.

The nodes array contains the node numbers that the pages should be moved
to. If a NULL is passed instead of an array then no pages are moved but
the status array is updated. The status request may be used to determine
the page state before issuing another move_pages() to move pages.

The status array will contain the state of all individual page migration
attempts when the function terminates. The status array is only valid if
move_pages() completed successfullly.

Possible page states in status[]:

0..MAX_NUMNODES	The page is now on the indicated node.

-ENOENT		Page is not present

-EACCES		Page is mapped by multiple processes and can only
		be moved if MPOL_MF_MOVE_ALL is specified.

-EPERM		The page has been mlocked by a process/driver and
		cannot be moved.

-EBUSY		Page is busy and cannot be moved. Try again later.

-EFAULT		Invalid address (no VMA or zero page).

-ENOMEM		Unable to allocate memory on target node.

-EIO		Unable to write back page. The page must be written
		back in order to move it since the page is dirty and the
		filesystem does not provide a migration function that
		would allow the moving of dirty pages.

-EINVAL		A dirty page cannot be moved. The filesystem does not provide
		a migration function and has no ability to write back pages.

The flags parameter indicates what types of pages to move:

MPOL_MF_MOVE	Move pages that are only mapped by the process.

MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes.
		Requires sufficient capabilities.

Possible return codes from move_pages()

-ENOENT		No pages found that would require moving. All pages
		are either already on the target node, not present, had an
		invalid address or could not be moved because they were
		mapped by multiple processes.

-EINVAL		Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt
		to migrate pages in a kernel thread.

-EPERM		MPOL_MF_MOVE_ALL specified without sufficient priviledges.
		or an attempt to move a process belonging to another user.

-EACCES		One of the target nodes is not allowed by the current cpuset.

-ENODEV		One of the target nodes is not online.

-ESRCH		Process does not exist.

-E2BIG		Too many pages to move.

-ENOMEM		Not enough memory to allocate control array.

-EFAULT		Parameters could not be accessed.

A test program for move_pages() may be found with the patches
on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3

From: Christoph Lameter <clameter@sgi.com>

  Detailed results for sys_move_pages()

  Pass a pointer to an integer to get_new_page() that may be used to
  indicate where the completion status of a migration operation should be
  placed.  This allows sys_move_pags() to report back exactly what happened to
  each page.

  Wish there would be a better way to do this. Looks a bit hacky.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Instead of passing a list of new pages, pass a function to allocate a new
page.  This allows the correct placement of MPOL_INTERLEAVE pages during page
migration.  It also further simplifies the callers of migrate pages.
migrate_pages() becomes similar to migrate_pages_to() so drop
migrate_pages_to().  The batching of new page allocations becomes unnecessary.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do not leave pages on the lists passed to migrate_pages().  Seems that we will
not need any postprocessing of pages.  This will simplify the handling of
pages by the callers of migrate_pages().
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change handling of address spaces.

Pass a pointer to the address space in which the page is migrated to all
migration function.  This avoids repeatedly having to retrieve the address
space pointer from the page and checking it for validity.  The old page
mapping will change once migration has gone to a certain step, so it is less
confusing to have the pointer always available.

Move the setting of the mapping and index for the new page into
migrate_pages().
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the export for migrate_page_remove_references() and migrate_page_copy()
that are unlikely to be used directly by filesystems implementing migration.
The export was useful when buffer_migrate_page() lived in fs/buffer.c but it
has now been moved to migrate.c in the migration reorg.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Fix migrate_pages_to() definition.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Centralize the page migration functions in anticipation of additional
tinkering.  Creates a new file mm/migrate.c

1. Extract buffer_migrate_page() from fs/buffer.c

2. Extract central migration code from vmscan.c

3. Extract some components from mempolicy.c

4. Export pageout() and remove_from_swap() from vmscan.c

5. Make it possible to configure NUMA systems without page migration
   and non-NUMA systems with page migration.

I had to so some #ifdeffing in mempolicy.c that may need a cleanup.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>