- 06 1月, 2009 1 次提交
-
-
由 Al Viro 提交于
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 23 10月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
With this patch all directory fops instances that have a readdir that doesn't take the BKL are switched to generic_file_llseek. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 17 10月, 2008 6 次提交
-
-
由 Eric W. Biederman 提交于
It finally dawned on me what the clean fix to sysfs_rename_dir calling kobject_set_name is. Move the work into kobject_rename where it belongs. The callers serialize us anyway so this is safe. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Trent Piepho 提交于
Because they can be, and because code like this produces a warning if they're not: struct device_attribute dev_attr; sysfs_notify(&kobj, NULL, dev_attr.attr.name); Signed-off-by: NTrent Piepho <tpiepho@freescale.com> CC: Neil Brown <neilb@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
As inode creation is protected by sysfs_mutex, ilookup5_nowait() always either fails to find at all or finds one which is fully initialized, so using ilookup5_nowait() or ilookup5() doesn't make any difference. Switch to ilookup5() as it's planned to be removed. This change also makes lookup return value handling a bit simpler. This change was suggested by Al Viro. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Al Viro <viro@hera.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nick Piggin 提交于
On Thu, Sep 11, 2008 at 10:27:10AM +0200, Ingo Molnar wrote: > and it's working fine on most boxes. One testbox found this new locking > scenario: > > PM: Adding info for No Bus:vcsa7 > EDAC DEBUG: MC0: i82860_check() > > ======================================================= > [ INFO: possible circular locking dependency detected ] > 2.6.27-rc6-tip #1 > ------------------------------------------------------- > X/4873 is trying to acquire lock: > (&bb->mutex){--..}, at: [<c020ba20>] mmap+0x40/0xa0 > > but task is already holding lock: > (&mm->mmap_sem){----}, at: [<c0125a1e>] sys_mmap2+0x8e/0xc0 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #1 (&mm->mmap_sem){----}: > [<c017dc96>] validate_chain+0xa96/0xf50 > [<c017ef2b>] __lock_acquire+0x2cb/0x5b0 > [<c017f299>] lock_acquire+0x89/0xc0 > [<c01aa8fb>] might_fault+0x6b/0x90 > [<c040b618>] copy_to_user+0x38/0x60 > [<c020bcfb>] read+0xfb/0x170 > [<c01c09a5>] vfs_read+0x95/0x110 > [<c01c1443>] sys_pread64+0x63/0x80 > [<c012146f>] sysenter_do_call+0x12/0x43 > [<ffffffff>] 0xffffffff > > -> #0 (&bb->mutex){--..}: > [<c017d8b7>] validate_chain+0x6b7/0xf50 > [<c017ef2b>] __lock_acquire+0x2cb/0x5b0 > [<c017f299>] lock_acquire+0x89/0xc0 > [<c0d6f2ab>] __mutex_lock_common+0xab/0x3c0 > [<c0d6f698>] mutex_lock_nested+0x38/0x50 > [<c020ba20>] mmap+0x40/0xa0 > [<c01b111e>] mmap_region+0x14e/0x450 > [<c01b170f>] do_mmap_pgoff+0x2ef/0x310 > [<c0125a3d>] sys_mmap2+0xad/0xc0 > [<c012146f>] sysenter_do_call+0x12/0x43 > [<ffffffff>] 0xffffffff > > other info that might help us debug this: > > 1 lock held by X/4873: > #0: (&mm->mmap_sem){----}, at: [<c0125a1e>] sys_mmap2+0x8e/0xc0 > > stack backtrace: > Pid: 4873, comm: X Not tainted 2.6.27-rc6-tip #1 > [<c017cd09>] print_circular_bug_tail+0x79/0xc0 > [<c017d8b7>] validate_chain+0x6b7/0xf50 > [<c017a5b5>] ? trace_hardirqs_off_caller+0x15/0xb0 > [<c017ef2b>] __lock_acquire+0x2cb/0x5b0 > [<c017f299>] lock_acquire+0x89/0xc0 > [<c020ba20>] ? mmap+0x40/0xa0 > [<c0d6f2ab>] __mutex_lock_common+0xab/0x3c0 > [<c020ba20>] ? mmap+0x40/0xa0 > [<c0d6f698>] mutex_lock_nested+0x38/0x50 > [<c020ba20>] ? mmap+0x40/0xa0 > [<c020ba20>] mmap+0x40/0xa0 > [<c01b111e>] mmap_region+0x14e/0x450 > [<c01afb88>] ? arch_get_unmapped_area_topdown+0xf8/0x160 > [<c01b170f>] do_mmap_pgoff+0x2ef/0x310 > [<c0125a3d>] sys_mmap2+0xad/0xc0 > [<c012146f>] sysenter_do_call+0x12/0x43 > [<c0120000>] ? __switch_to+0x130/0x220 > ======================= > evbug.c: Event. Dev: input3, Type: 20, Code: 0, Value: 500 > warning: `sudo' uses deprecated v2 capabilities in a way that may be insecure. > > i've attached the config. > > at first sight it looks like a genuine bug in fs/sysfs/bin.c? Yes, it is a real bug by the looks. bin.c takes bb->mutex under mmap_sem when it is mmapped, and then does its copy_*_user under bb->mutex too. Here is a basic fix for the sysfs lor. From: Nick Piggin <npiggin@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Neil Brown 提交于
Support sysfs_notify from atomic context with new sysfs_notify_dirent sysfs_notify currently takes sysfs_mutex. This means that it cannot be called in atomic context. sysfs_mutex is sometimes held over a malloc (sysfs_rename_dir) so it can block on low memory. In md I want to be able to notify on a sysfs attribute from atomic context, and I don't want to block on low memory because I could be in the writeout path for freeing memory. So: - export the "sysfs_dirent" structure along with sysfs_get, sysfs_put and sysfs_get_dirent so I can get the sysfs_dirent that I want to notify on and hold it in an md structure. - split sysfs_notify_dirent out of sysfs_notify so the sysfs_dirent can be notified on with no blocking (just a spinlock). Signed-off-by: NNeil Brown <neilb@suse.de> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
Print the name of the last-accessed sysfs file when we oops, to help track down oopses which occur in sysfs store/read handlers. Because these oopses tend to not leave any trace of the offending code in the stack traces. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 7月, 2008 1 次提交
-
-
由 Arjan van de Ven 提交于
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. Also, with this, one fo the if() sections collapses entirely into the WARN(). Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2008 2 次提交
-
-
由 Cornelia Huck 提交于
driver core: Suppress sysfs warnings for device_rename(). Renaming network devices to an already existing name is not something we want sysfs to print a scary warning for, since the callers can deal with this correctly. So let's introduce sysfs_create_link_nowarn() which gets rid of the common warning. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Miklos Szeredi 提交于
sysfs_chmod_file() calls notify_change() to change the permission bits on a sysfs file. Replace with explicit call to sysfs_setattr() and fsnotify_change(). This is equivalent, except that security_inode_setattr() is not called. This function is called by drivers, so the security checks do not make any sense. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 5月, 2008 1 次提交
-
-
由 Stephen Hemminger 提交于
It is possible that the entry in sysfs already exists, one case of this is when a network device is renamed to bonding_masters. Anyway, in this case the proper error path is for device_rename to return an error code, not to generate bogus backtrace and errors. Also, to avoid possible races, the create link should be done before the remove link. This makes a device rename atomic operation like other renames. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 5月, 2008 1 次提交
-
-
由 Ben Hutchings 提交于
sysfs allows attribute files to be truncated, e.g. using ftruncate(), with the expected effect on their inode. For most attributes, this doesn't change the "real" size of the file i.e. how much can be read from it. However, the parameter validation for reading and writing binary attribute files is based on the inode size and not the size specified in the file's bin_attribute, so it can be broken by this. For example, if we try using dd to write to such a file: # pwd /sys/bus/pci/devices/0000:08:00.0 # ls -l config -rw-r--r-- 1 root root 4096 Feb 1 17:35 config # dd if=/dev/zero of=config bs=4 count=1 1+0 records in 1+0 records out # ls -l config -rw-r--r-- 1 root root 0 Feb 1 17:50 config # dd if=/dev/zero of=config bs=4 count=1 seek=128 dd: writing `config': No space left on device 1+0 records in 0+0 records out Also, after truncation to 0, parameter validation for read and write is disabled. Most bin_attribute read and write methods also validate the size and offset, but for some this will allow out-of-range access. This may be a security issue, though access to such files is often limited to root. In any case, the validation should remain for safety's sake!) This was previously reported in Bugzilla as bug 9867. sysfs should ignore size changes or else refuse them (by returning -EINVAL). This patch makes it ignore them. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 4月, 2008 2 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Add a new BDI capability flag: BDI_CAP_NO_ACCT_WB. If this flag is set, then don't update the per-bdi writeback stats from test_set_page_writeback() and test_clear_page_writeback(). Misc cleanups: - convert bdi_cap_writeback_dirty() and friends to static inline functions - create a flag that includes all three dirty/writeback related flags, since almst all users will want to have them toghether Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 4月, 2008 1 次提交
-
-
由 James Bottomley 提交于
We have a problem in scsi_transport_spi in that we need to customise not only the visibility of the attributes, but also their mode. Fix this by making the is_visible() callback return a mode, with 0 indicating is not visible. Also add a sysfs_update_group() API to allow us to change either the visibility or mode of the files at any time on the fly. Acked-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 20 4月, 2008 2 次提交
-
-
由 Dan Williams 提交于
Requiring userspace to close and re-open sysfs attributes has been the policy since before 2.6.12. It allows userspace to get a consistent snapshot of kernel state and consume it with incremental reads and seeks. Now, if the file position is zero the kernel assumes userspace wants to see the new value. The application for this change is to allow a userspace RAID metadata handler to check the state of an array without causing any memory allocations. Thus not causing writeback to a raid array that might be blocked waiting for userspace to take action. Cc: Neil Brown <neilb@suse.de> Acked-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Robert P. J. Day 提交于
After an experimental deletion of the unnecessary inclusion of <linux/slab.h> from the header file <linux/percpu.h>, the following files under fs/sysfs were exposed as needing to explicitly include <linux/slab.h>. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 4月, 2008 1 次提交
-
-
由 Mark Fasheh 提交于
Allow callers of sysfs_remove_link() to pass a NULL kobj, in which case sysfs_root will be used as the parent directory. This allows us to tear down top level symlinks created via sysfs_create_link(), which already has similar handling of a NULL parent object. Signed-off-by: NMark Fasheh <mfasheh@suse.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 3月, 2008 1 次提交
-
-
由 Andrew Morton 提交于
Try to find the culprit who caused http://bugzilla.kernel.org/show_bug.cgi?id=10150 Cc: <balajirrao@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 2月, 2008 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
It's possible that the caller of sysfs_remove_group messed up and passed in an attribute group that was not really registered to this kobject. But don't panic for such a foolish error, spit out a warning about what happened, and continue on our way safely. Cc: Roland Dreier <rdreier@cisco.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 1月, 2008 5 次提交
-
-
由 Kay Sievers 提交于
Remove the no longer needed subsys_attributes, they are all converted to the more sensical kobj_attributes. There is no longer a magic fallback in sysfs attribute operations, all kobjects which create simple attributes need explicitely a ktype assigned, which tells the core what was intended here. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
We don't need a "default" ktype for a kset. We should set this explicitly every time for each kset. This change is needed so that we can make ksets dynamic, and cleans up one of the odd, undocumented assumption that the kset/kobject/ktype model has. This patch is based on a lot of help from Kay Sievers. Nasty bug in the block code was found by Dave Young <hidave.darkstar@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <teheo@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Instead of walking from the source down to the root of sysfs, and back to the target, we stop at the first directory the source and the target share. This link: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0/ep_81 pointed to: ../../../../../devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0/usb_endpoint/usbdev2.1_ep81 now it just points to: usb_endpoint/usbdev1.1_ep81 Thanks to Denis Cheng for bringing this up, and sending the initial patch. CC: Denis Cheng <crquan@gmail.com> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 1月, 2008 2 次提交
-
-
由 James Bottomley 提交于
This patch allows the various users of attribute_groups to selectively allow the appearance of group attributes. The primary consumer of this will be the transport classes in which we currently have elaborate attribute selection algorithms to do this same thing. Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Bottomley 提交于
I can't see a reason why these shouldn't work on every group. However, they only seem to work on named groups. This patch allows the group functions to work on anonymous groups (those with NULL names). Acked-by: NTejun Heo <htejun@gmail.com> Acked-by: NKay Sievers <kay.sievers@vrfy.org> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 17 1月, 2008 2 次提交
-
-
由 Tejun Heo 提交于
sysfs_rename/move_dir() have the following bugs. - On dentry lookup failure, kfree() is called on ERR_PTR() value. - sysfs_move_dir() has an extra dput() on success path. Fix them. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
sysfs tries to keep dcache a strict subset of sysfs_dirent tree by shooting down dentries when a node is removed, that is, no negative dentry for sysfs. However, the lookup function returned NULL and thus created negative dentries when the target node didn't exist. Make sysfs_lookup() return ERR_PTR(-ENOENT) on lookup failure. This fixes the NULL dereference bug in sysfs_get_dentry() discovered by bluetooth rfcomm device moving around. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 11月, 2007 1 次提交
-
-
由 Miao Xie 提交于
I found that there is a off-by-one problem in the following code. Version: 2.6.24-rc2 File: fs/sysfs/file.c:118-122 Function: fill_read_buffer -------------------------------------------------------------------- count = ops->show(kobj, attr_sd->s_attr.attr, buffer->page); sysfs_put_active_two(attr_sd); BUG_ON(count > (ssize_t)PAGE_SIZE); -------------------------------------------------------------------- Because according to the specification of the sysfs and the implement of the show methods, the show methods return the number of bytes which would be generated for the given input, excluding the trailing null.So if the return value of the show methods equals PAGE_SIZE - 1, the buffer is full in fact. And if the return value equals PAGE_SIZE, the resulting string was already truncated,or buffer overflow occurred. This patch fixes an off-by-one error in fill_read_buffer. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NTejun Heo <teheo@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 31 10月, 2007 1 次提交
-
-
由 Adrian Bunk 提交于
sysfs_{get,put}_active() can now become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 10月, 2007 1 次提交
-
-
由 Chris Malley 提交于
Spelling error in sysfs_create_file kerneldoc. Signed-off-by: NChris Malley <mail@chrismalley.co.uk> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 17 10月, 2007 4 次提交
-
-
由 Roel Kluin 提交于
Replace some SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
provide BDI constructor/destructor hooks [akpm@linux-foundation.org: compile fix] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Try to fix the mess created by sysfs braindamage. - refactor code internal to fs/namei.c a little to avoid too much duplication: o __lookup_hash_kern is renamed back to __lookup_hash o the old __lookup_hash goes away, permission checks moves to the two callers o useless inline qualifiers on above functions go away - lookup_one_len_kern loses it's last argument and is renamed to lookup_one_noperm to make it's useage a little more clear - added kerneldoc comments to describe lookup_one_len aswell as lookup_one_noperm and make it very clear that no one should use the latter ever. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Implement new aops for some of the simpler filesystems. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 10月, 2007 3 次提交
-
-
由 Tejun Heo 提交于
Sysfs has gone through considerable amount of reimplementation. Add copyrights. Any objections? :-) Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Sysfs file poll implementation is scattered over sysfs and kobject. Event numbering is done in sysfs_dirent but wait itself is done on kobject. This not only unecessarily bloats both kobject and sysfs_dirent but is also buggy - if a sysfs_dirent is removed while there still are pollers, the associaton betwen the kobject and sysfs_dirent breaks and kobject may be freed with the pollers still sleeping on it. This patch moves whole poll implementation into sysfs_open_dirent. Each time a sysfs_open_dirent is created, event number restarts from 1 and pollers sleep on sysfs_open_dirent. As event sequence number is meaningless without any open file and pollers should have open file and thus sysfs_open_dirent, this ephemeral event counting works and is a saner implementation. This patch fixes the dnagling sleepers bug and reduces the sizes of kobject and sysfs_dirent by one pointer. Signed-off-by: NTejun Heo <htejun@gmail.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Implement sysfs_open_dirent which represents an open file (attribute) sysfs_dirent. A file sysfs_dirent with one or more open files have one sysfs_dirent and all sysfs_buffers (one for each open instance) are linked to it. sysfs_open_dirent doesn't actually do anything yet but will be used to off-load things which are specific for open file sysfs_dirent from it. Signed-off-by: NTejun Heo <htejun@gmail.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-