- 09 7月, 2012 1 次提交
-
-
由 Mark Brown 提交于
Use the most simple possible transformation on the existing code so keep the table sitting around, further patches in this series will delete the existing cache code - the main purpose of this patch is to ensure that we always have a cache for bisection. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 07 5月, 2012 1 次提交
-
-
由 Mark Brown 提交于
The driver still uses a custom cache implementation but the underlying physical I/O is now done using the regmap API, saving some code and avoiding allocating enormous scratch arrays on the stack. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 08 3月, 2010 4 次提交
-
-
由 Mark Brown 提交于
Use the completion interrupt generated by the device rather than polling for conversions to complete. As a backup we still check the state of the AUXADC if we don't get a completion, mostly for systems that don't have the WM8350 interrupt infrastructure hooked up. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
This gives us use of the diagnostic facilities genirq provides and will allow implementation of interrupt support for the WM8350 GPIOs. Stub functions are provided to ease the transition of the individual drivers, probably after additional work to pass the IRQ numbers via the struct devices. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
To better match genirq. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 14 12月, 2009 3 次提交
-
-
由 Mark Brown 提交于
This is done as simple code transformation, the semantics of the IRQ API provided by the core are are still very different to those of genirq (mainly with regard to masking). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
This is currently unused by the wm8350 drivers but getting it merged now will reduce merge issues in the future when implementing wm8350 genirq support. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
In preparation for refactoring - it's over 700 lines of well-isolated code and having it in a file by itself makes things more managable. While we're at it make sure that we clean up the IRQ if we fail after acquiring it on init. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 17 9月, 2009 2 次提交
-
-
由 Mark Brown 提交于
Instead of hand rolling our own variant. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
This driver provides reporting of the status supply voltage rails of the WM835x series of PMICs via the hwmon API. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 05 4月, 2009 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
- 04 1月, 2009 8 次提交
-
-
由 Mark Brown 提交于
The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
由 Mark Brown 提交于
The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
由 Mark Brown 提交于
Implement support for reporting battery health in the WM8350 battery interface. Since we are now able to report this via the classs remove the diagnostics from the interrupt handler. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
由 Mark Brown 提交于
Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
由 Mark Brown 提交于
Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
由 Mark Brown 提交于
This patch adds support for the PMU provided by the WM8350 which implements battery, line and USB supplies including a battery charger. The hardware functions largely autonomously, with minimal software control required to initiate fast charging. Support for configuration of the USB supply is not yet implemented. This means that the hardware will remain in the mode configured at startup, by default limiting the current drawn from USB to 100mA. This driver was originally written by Liam Girdwood with subsequent updates for submission by Mark Brown. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
由 Mark Brown 提交于
The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
由 Mark Brown 提交于
No other software changes are required. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
- 14 10月, 2008 5 次提交
-
-
由 Mark Brown 提交于
In order to avoid merge problems further down the line add placeholders for several of the WM8350 client devices and register them, otherwise the patches adding the client devices will all try to update the same code. Also remove redundant checks for null regulator platform devices while we're at it. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSamuel Ortiz <sameo@openedhand.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSamuel Ortiz <sameo@openedhand.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Some functions of the WM8350 require board-specific initialisation on startup. Provide a callback to the WM8350 driver in platform data for platforms to use to configure the chip. Use of a callback allows platforms to control the ordering of initialisation which can be important. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSamuel Ortiz <sameo@openedhand.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSamuel Ortiz <sameo@openedhand.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-