Frontswap initialization routine depends on swap_lock, which want to be
atomic about frontswap's first appearance.  IOW, frontswap is not present
and will fail all calls OR frontswap is fully functional but if new
swap_info_struct isn't registered by enable_swap_info, swap subsystem
doesn't start I/O so there is no race between init procedure and page I/O
working on frontswap.

So let's remove unnecessary swap_lock dependency.

Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NMinchan Kim <minchan@kernel.org>
[v1: Rebased on my branch, reworked to work with backends loading late]
[v2: Added a check for !map]
[v3: Made the invalidate path follow the init path]
[v4: Address comments by Wanpeng Li <liwanp@linux.vnet.ibm.com>]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad@darnok.org>
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After allowing tmem backends to build/run as modules, frontswap_enabled
always true if defined CONFIG_FRONTSWAP.  But frontswap_test() depends on
whether backend is registered, mv it into frontswap.c using fronstswap_ops
to make the decision.

frontswap_set/clear are not used outside frontswap, so don't export them.
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This simplifies the code in the frontswap - we can get rid of the
'backend_registered' test and instead check against frontswap_ops.

[v1: Rebase on top of 703ba7fe (ramster->zcache move]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tmem, as originally specified, assumes that "get" operations
performed on persistent pools never flush the page of data out
of tmem on a successful get, waiting instead for a flush
operation.  This is intended to mimic the model of a swap
disk, where a disk read is non-destructive.  Unlike a
disk, however, freeing up the RAM can be valuable.  Over
the years that frontswap was in the review process, several
reviewers (and notably Hugh Dickins in 2010) pointed out that
this would result, at least temporarily, in two copies of the
data in RAM: one (compressed for zcache) copy in tmem,
and one copy in the swap cache.  We wondered if this could
be done differently, at least optionally.

This patch allows tmem backends to instruct the frontswap
code that this backend performs exclusive gets.  Zcache2
already contains hooks to support this feature.  Other
backends are completely unaffected unless/until they are
updated to support this feature.

While it is not clear that exclusive gets are a performance
win on all workloads at all times, this small patch allows for
experimentation by backends.

P.S. Let's not quibble about the naming of "get" vs "read" vs
"load" etc.  The naming is currently horribly inconsistent between
cleancache and frontswap and existing tmem backends, so will need
to be straightened out as a separate patch.  "Get" is used
by the tmem architecture spec, existing backends, and
all documentation and presentation material so I am
using it in this patch.
Signed-off-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Sounds so much more natural.
Suggested-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Frontswap is the alter ego of cleancache, the "yang" to cleancache's
"yin"... and more precisely frontswap is the provider of anonymous
pages to transcendent memory to nicely complement cleancache's providing
of clean pagecache pages to transcendent memory.  For optimal use
of transcendent memory, both are necessary... because a kernel
under memory pressure first reclaims clean pagecache pages and,
when under more memory pressure, starts swapping anonymous pages.

Frontswap and cleancache (which was merged at 3.0) are the "frontends"
and the only necessary changes to the core kernel for transcendent memory;
all other supporting code -- the "backends" -- is implemented as drivers.
See the LWN.net article "Transcendent memory in a nutshell" for a detailed
overview of frontswap and related kernel parts:
https://lwn.net/Articles/454795/

Frontswap code was first posted publicly in January 2009 and on LKML in
May 2009, and has remained functionally stable for nearly three years now.
It is barely invasive, touching only the swap subsystem and adds less
than 100 lines of code to existing swap subsystem code files.
It has improved syntactically substantially between V1 and this posting
of V14, thanks to the review of a few kernel developers, and has adapted
easily to at least one major swap subsystem change.  As of 3.4, there are
three in-tree users of frontswap patiently waiting for this patchset and
for CONFIG_FRONTSWAP to be enabled: zcache (staging driver merged at
2.6.39), Xen tmem (merged at 3.0 and 3.1) and RAMster (staging driver
merged at 3.4).  In addition, a RFC has been posted for a KVM backend.
The frontswap patchset has been in linux-next since next-110603.  Earlier
versions of frontswap already ship in the Oracle Unbreakable Enterprise Kernel
and SuSE SLES.

This patch, 1of4, provides the header file for the core code for frontswap
that interfaces between the hooks in the swap subsystem and a frontswap
backend via frontswap_ops.
---
New file added: include/linux/frontswap.h

[v14: add support for writethrough, per suggestion by aarcange@redhat.com]
[v14: rebase to 3.4-rc2]
[v11: konrad.wilk@oracle.com: squashed s/flush/invalidate/ in]
[v10: no change]
[v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1]
[v8: rebase to 3.0-rc4]
[v7: rebase to 3.0-rc3]
[v7: JBeulich@novell.com: new static inlines resolve to no-ops if not config'd]
[v7: JBeulich@novell.com: avoid redundant shifts/divides for *_bit lib calls]
[v6: rebase to 3.1-rc1]
[v5: no change from v4]
[v4: rebase to 2.6.39]
Signed-off-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NJan Beulich <JBeulich@novell.com>
Acked-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Rik Riel <riel@redhat.com>
[v15: int/bool on some functions]
Signed-off-by: NKonrad Wilk <konrad.wilk@oracle.com>