- 15 7月, 2013 1 次提交
-
-
由 Paul Gortmaker 提交于
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the net/* uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 30 3月, 2013 2 次提交
-
-
由 Li RongQing 提交于
replace per_cpu with per_cpu_ptr to save conversion between address and pointer Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
flush_tasklet is not percpu var, and percpu is percpu var, and this_cpu_ptr(&info->cache->percpu->flush_tasklet) is not equal to &this_cpu_ptr(info->cache->percpu)->flush_tasklet 1f743b07(use this_cpu_ptr per-cpu helper) introduced this bug. Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2013 1 次提交
-
-
由 Chris Metcalf 提交于
Previously, if you did an "ifconfig down" or similar on one core, and the kernel had CONFIG_XFRM enabled, every core would be interrupted to check its percpu flow list for items that could be garbage collected. With this change, we generate a mask of cores that actually have any percpu items, and only interrupt those cores. When we are trying to isolate a set of cpus from interrupts, this is important to do. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2013 1 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 1月, 2013 1 次提交
-
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2012 1 次提交
-
-
由 Shan Wei 提交于
flush_tasklet is a struct, not a pointer in percpu var. so use this_cpu_ptr to get the member pointer. Signed-off-by: NShan Wei <davidshan@tencent.com> Reviewed-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 12月, 2011 1 次提交
-
-
由 Steffen Klassert 提交于
flow_cach_flush() might sleep but can be called from atomic context via the xfrm garbage collector. So add a flow_cache_flush_deferred() function and use this if the xfrm garbage colector is invoked from within the packet path. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NTimo Teräs <timo.teras@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2011 1 次提交
-
-
由 huajun li 提交于
While preparing net flow caches, once a fail may cause potential memory leak , fix it. Signed-off-by: NHuajun Li <huajun.li.lee@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2011 1 次提交
-
-
由 dpward 提交于
With the conversion of struct flowi to a union of AF-specific structs, some operations on the flow cache need to account for the exact size of the key. Signed-off-by: NDavid Ward <david.ward@ll.mit.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2011 1 次提交
-
-
由 dpward 提交于
flow_cache_lookup will return a cached object (or null pointer) that the resolver (i.e. xfrm_policy_lookup) previously found for another namespace using the same key/family/dir. Instead, make the namespace part of what identifies entries in the cache. As before, flow_entry_valid will return 0 for entries where the namespace has been deleted, and they will be removed from the cache the next time flow_cache_gc_task is run. Reported-by: NAndrew Dickinson <whydna@whydna.net> Signed-off-by: NDavid Ward <david.ward@ll.mit.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Allocate hash tables for every online cpus, not every possible ones. NUMA aware allocations. Dont use a full page on arches where PAGE_SIZE > 1024*sizeof(void *) misc: __percpu , __read_mostly, __cpuinit annotations flow_compare_t is just an "unsigned long" Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
CodingStyle cleanups EXPORT_SYMBOL should immediately follow the symbol declaration. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
use this_cpu_ptr(p) instead of per_cpu_ptr(p, smp_processor_id()) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2010 2 次提交
-
-
由 Timo Teräs 提交于
Speed up lookups by freeing flow cache entries later. After virtualizing flow cache entry operations, the flow cache may now end up calling policy or bundle destructor which can be slowish. As gc_list is more effective with double linked list, the flow cache is converted to use common hlist and list macroes where appropriate. Signed-off-by: NTimo Teras <timo.teras@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timo Teräs 提交于
This allows to validate the cached object before returning it. It also allows to destruct object properly, if the last reference was held in flow cache. This is also a prepartion for caching bundles in the flow cache. In return for virtualizing the methods, we save on: - not having to regenerate the whole flow cache on policy removal: each flow matching a killed policy gets refreshed as the getter function notices it smartly. - we do not have to call flow_cache_flush from policy gc, since the flow cache now properly deletes the object if it had any references Signed-off-by: NTimo Teras <timo.teras@iki.fi> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2010 1 次提交
-
-
由 Timo Teräs 提交于
Group all per-cpu data to one structure instead of having many globals. Also prepare the internals so that we can have multiple instances of the flow cache if needed. Only the kmem_cache is left as a global as all flow caches share the same element size, and benefit from using a common cache. Signed-off-by: NTimo Teras <timo.teras@iki.fi> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
Pass netns to xfrm_lookup()/__xfrm_lookup(). For that pass netns to flow_cache_lookup() and resolver callback. Take it from socket or netdevice. Stub DECnet to init_net. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 11月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
It's called from __init code only. And__devinit in generic networking code is pretty strange :^) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2008 1 次提交
-
-
由 Jens Axboe 提交于
It's never used and the comments refer to nonatomic and retry interchangably. So get rid of it. Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 19 4月, 2008 1 次提交
-
-
由 Matthew Wilcox 提交于
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
- 08 2月, 2008 2 次提交
-
-
由 Eric Dumazet 提交于
1) We can shrink sizeof(struct flow_cache_entry) by 8 bytes on 64bit arches. 2) No need to align these structures to hardware cache lines, this only waste ram for very litle gain. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We use a percpu variable named flow_hash_info, which holds 12 bytes. It is currently marked as ____cacheline_aligned, which makes linker skip space to properly align this variable. Before : c065cc90 D per_cpu__softnet_data c065cd00 d per_cpu__flow_tables <Here, hole of 124 bytes> c065cd80 d per_cpu__flow_hash_info <Here, hole of 116 bytes> c065ce00 d per_cpu__flow_flush_tasklets c065ce14 d per_cpu__rt_cache_stat This alignement is quite unproductive, and removing it reduces the size of percpu data (by 240 bytes on my x86 machine), and improves performance (flow_tables & flow_hash_info can share a single cache line) After patch : c065cc04 D per_cpu__softnet_data c065cc4c d per_cpu__flow_tables c065cc50 d per_cpu__flow_hash_info c065cc5c d per_cpu__flow_flush_tasklets c065cc70 d per_cpu__rt_cache_stat Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2008 1 次提交
-
-
由 Gautham R Shenoy 提交于
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use get_online_cpus and put_online_cpus instead as it highlights the refcount semantics in these operations. The new API guarantees protection against the cpu-hotplug operation, but it doesn't guarantee serialized access to any of the local data structures. Hence the changes needs to be reviewed. In case of pseries_add_processor/pseries_remove_processor, use cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the cpu_present_map there. Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 10月, 2007 1 次提交
-
-
由 Pavel Emelyanov 提交于
Instead of ugly extern not-existing function. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2007 1 次提交
-
-
由 Paul Mundt 提交于
Slab destructors were no longer supported after Christoph's c59def9f change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 10 5月, 2007 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 1月, 2007 1 次提交
-
-
由 Herbert Xu 提交于
When old flow cache entries that are not at the head of their chain trigger a transient security error they get unlinked along with all the entries preceding them in the chain. The preceding entries are not freed correctly. This patch fixes this by simply leaving the entry around. It's based on a suggestion by Venkat Yekkirala. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2006 3 次提交
-
-
由 Ingo Molnar 提交于
There was lots of #ifdef noise in the kernel due to hotcpu_notifier(fn, prio) not correctly marking 'fn' as used in the !HOTPLUG_CPU case, and thus generating compiler warnings of unused symbols, hence forcing people to add #ifdefs. the compiler can skip truly unused functions just fine: text data bss dec hex filename 1624412 728710 3674856 6027978 5bfaca vmlinux.before 1624412 728710 3674856 6027978 5bfaca vmlinux.after [akpm@osdl.org: topology.c fix] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org> -
由 Christoph Lameter 提交于
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
SLAB_ATOMIC is an alias of GFP_ATOMIC Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 10月, 2006 1 次提交
-
-
由 James Morris 提交于
When a security module is loaded (in this case, SELinux), the security_xfrm_policy_lookup() hook can return an access denied permission (or other error). We were not handling that correctly, and in fact inverting the return logic and propagating a false "ok" back up to xfrm_lookup(), which then allowed packets to pass as if they were not associated with an xfrm policy. The way I was seeing the problem was when connecting via IPsec to a confined service on an SELinux box (vsftpd), which did not have the appropriate SELinux policy permissions to send packets via IPsec. The first SYNACK would be blocked, because of an uncached lookup via flow_cache_lookup(), which would fail to resolve an xfrm policy because the SELinux policy is checked at that point via the resolver. However, retransmitted SYNACKs would then find a cached flow entry when calling into flow_cache_lookup() with a null xfrm policy, which is interpreted by xfrm_lookup() as the packet not having any associated policy and similarly to the first case, allowing it to pass without transformation. The solution presented here is to first ensure that errno values are correctly propagated all the way back up through the various call chains from security_xfrm_policy_lookup(), and handled correctly. Then, flow_cache_lookup() is modified, so that if the policy resolver fails (typically a permission denied via the security module), the flow cache entry is killed rather than having a null policy assigned (which indicates that the packet can pass freely). This also forces any future lookups for the same flow to consult the security module (e.g. SELinux) for current security policy (rather than, say, caching the error on the flow cache entry). Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 23 9月, 2006 2 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Yekkirala 提交于
This implements a seemless mechanism for xfrm policy selection and state matching based on the flow sid. This also includes the necessary SELinux enforcement pieces. Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2006 1 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu under /net Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: N"David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 4月, 2006 1 次提交
-
-
由 Andrew Morton 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-