Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 15 7月, 2013 1 次提交
    • P
      x86: delete __cpuinit usage from all x86 files · 148f9bb8
      由 Paul Gortmaker 提交于 
      The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      148f9bb8
  3. 28 1月, 2013 7 次提交
  5. 18 11月, 2012 1 次提交
  7. 12 9月, 2012 4 次提交
  9. 25 5月, 2012 1 次提交
  11. 02 5月, 2012 1 次提交
  13. 17 4月, 2012 1 次提交
  15. 20 3月, 2012 1 次提交
    • M
      x86: kvmclock: abstract save/restore sched_clock_state · b74f05d6
      由 Marcelo Tosatti 提交于 
      Upon resume from hibernation, CPU 0's hvclock area contains the old
values for system_time and tsc_timestamp. It is necessary for the
hypervisor to update these values with uptodate ones before the CPU uses
them.

Abstract TSC's save/restore sched_clock_state functions and use
restore_state to write to KVM_SYSTEM_TIME MSR, forcing an update.

Also move restore_sched_clock_state before __restore_processor_state,
since the later calls CONFIG_LOCK_STAT's lockstat_clock (also for TSC).
Thanks to Igor Mammedov for tracking it down.

Fixes suspend-to-disk with kvmclock.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      b74f05d6
  17. 05 3月, 2012 1 次提交
    • I
      x86: Introduce x86_cpuinit.early_percpu_clock_init hook · df156f90
      由 Igor Mammedov 提交于 
      When kvm guest uses kvmclock, it may hang on vcpu hot-plug.
This is caused by an overflow in pvclock_get_nsec_offset,

    u64 delta = tsc - shadow->tsc_timestamp;

which in turn is caused by an undefined values from percpu
hv_clock that hasn't been initialized yet.
Uninitialized clock on being booted cpu is accessed from
   start_secondary
    -> smp_callin
      ->  smp_store_cpu_info
        -> identify_secondary_cpu
          -> mtrr_ap_init
            -> mtrr_restore
              -> stop_machine_from_inactive_cpu
                -> queue_stop_cpus_work
                  ...
                    -> sched_clock
                      -> kvm_clock_read
which is well before x86_cpuinit.setup_percpu_clockev call in
start_secondary, where percpu clock is initialized.

This patch introduces a hook that allows to setup/initialize
per_cpu clock early and avoid overflow due to reading
  - undefined values
  - old values if cpu was offlined and then onlined again

Another possible early user of this clock source is ftrace that
accesses it to get timestamps for ring buffer entries. So if
mtrr_ap_init is moved from identify_secondary_cpu to past
x86_cpuinit.setup_percpu_clockev in start_secondary, ftrace
may cause the same overflow/hang on cpu hot-plug anyway.

More complete description of the problem:
  https://lkml.org/lkml/2012/2/2/101

Credits to Marcelo Tosatti <mtosatti@redhat.com> for hook idea.
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      df156f90
  19. 07 1月, 2012 1 次提交
  21. 06 12月, 2011 1 次提交
  23. 10 11月, 2011 2 次提交
  25. 13 5月, 2011 1 次提交
    • S
      x86,xen: introduce x86_init.mapping.pagetable_reserve · 279b706b
      由 Stefano Stabellini 提交于 
      Introduce a new x86_init hook called pagetable_reserve that at the end
of init_memory_mapping is used to reserve a range of memory addresses for
the kernel pagetable pages we used and free the other ones.

On native it just calls memblock_x86_reserve_range while on xen it also
takes care of setting the spare memory previously allocated
for kernel pagetable pages from RO to RW, so that it can be used for
other purposes.

A detailed explanation of the reason why this hook is needed follows.

As a consequence of the commit:

commit 4b239f45
Author: Yinghai Lu <yinghai@kernel.org>
Date:   Fri Dec 17 16:58:28 2010 -0800

    x86-64, mm: Put early page table high

at some point init_memory_mapping is going to reach the pagetable pages
area and map those pages too (mapping them as normal memory that falls
in the range of addresses passed to init_memory_mapping as argument).
Some of those pages are already pagetable pages (they are in the range
pgt_buf_start-pgt_buf_end) therefore they are going to be mapped RO and
everything is fine.
Some of these pages are not pagetable pages yet (they fall in the range
pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they
are going to be mapped RW.  When these pages become pagetable pages and
are hooked into the pagetable, xen will find that the guest has already
a RW mapping of them somewhere and fail the operation.
The reason Xen requires pagetables to be RO is that the hypervisor needs
to verify that the pagetables are valid before using them. The validation
operations are called "pinning" (more details in arch/x86/xen/mmu.c).

In order to fix the issue we mark all the pages in the entire range
pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation
is completed only the range pgt_buf_start-pgt_buf_end is reserved by
init_memory_mapping. Hence the kernel is going to crash as soon as one
of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those
ranges are RO).

For this reason we need a hook to reserve the kernel pagetable pages we
used and free the other ones so that they can be reused for other
purposes.
On native it just means calling memblock_x86_reserve_range, on Xen it
also means marking RW the pagetable pages that we allocated before but
that haven't been used before.

Another way to fix this is without using the hook is by adding a 'if
(xen_pv_domain)' in the 'init_memory_mapping' code and calling the Xen
counterpart, but that is just nasty.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      279b706b
  27. 16 3月, 2011 1 次提交
    • D
      x86: Introduce pci_map_biosrom() · 5d94e81f
      由 Dan Williams 提交于 
      The isci driver needs to retrieve its preboot OROM image which contains
necessary runtime parameters like platform specific sas addresses and
phy configuration.  There is no ROM BAR associated with this area,
instead we will need to scan legacy expansion ROM space.

1/ Promote the probe_roms_32 implementation to x86-64
2/ Add a facility to find and map an adapter rom by pci device (according to
   PCI Firmware Specification Revision 3.0)
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
LKML-Reference: <20110308183226.6246.90354.stgit@localhost6.localdomain6>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      5d94e81f
  29. 15 2月, 2011 1 次提交
  31. 18 10月, 2010 1 次提交
  33. 08 7月, 2010 2 次提交
  35. 27 2月, 2010 1 次提交
    • R
      x86: Enable NMI on all cpus on UV · 78c06176
      由 Russ Anderson 提交于 
      Enable NMI on all cpus in UV system and add an NMI handler
to dump_stack on each cpu.

By default on x86 all the cpus except the boot cpu have NMI
masked off.  This patch enables NMI on all cpus in UV system
and adds an NMI handler to dump_stack on each cpu.  This
way if a system hangs we can NMI the machine and get a
backtrace from all the cpus.

Version 2: Use x86_platform driver mechanism for nmi init, per
           Ingo's suggestion.

Version 3: Clean up Ingo's nits.
Signed-off-by: NRuss Anderson <rja@sgi.com>
LKML-Reference: <20100226164912.GA24439@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      78c06176
  37. 20 2月, 2010 3 次提交
  39. 24 11月, 2009 2 次提交
  41. 16 11月, 2009 1 次提交
  43. 15 11月, 2009 1 次提交
  45. 10 11月, 2009 1 次提交
    • F
      x86: Add iommu_init to x86_init_ops · d07c1be0
      由 FUJITA Tomonori 提交于 
      We call the detections functions of all the IOMMUs then all
their initialization functions. The latter is pointless since we
don't detect multiple different IOMMUs. What we need to do is
calling the initialization function of the detected IOMMU.

This adds iommu_init hook to x86_init_ops so if an IOMMU
detection function can set its initialization function to the
hook.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: chrisw@sous-sol.org
Cc: dwmw2@infradead.org
Cc: joerg.roedel@amd.com
Cc: muli@il.ibm.com
LKML-Reference: <1257849980-22640-2-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d07c1be0
  47. 08 11月, 2009 1 次提交
    • F
      x86: Use x86_platform for iommu_shutdown · 338bac52
      由 FUJITA Tomonori 提交于 
      This patch cleans up pci_iommu_shutdown() a bit to use
x86_platform (similar to how IA64 initializes an IOMMU driver).

This adds iommu_shutdown() to x86_platform to avoid calling
every IOMMUs' shutdown functions in pci_iommu_shutdown() in
order. The IOMMU shutdown functions are platform specific (we
don't have multiple different IOMMU hardware) so the current way
is pointless.

An IOMMU driver sets x86_platform.iommu_shutdown to the shutdown
function if necessary.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: joerg.roedel@amd.com
LKML-Reference: <20091027163358F.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      338bac52
  49. 16 9月, 2009 2 次提交