Commit be4f154d
	bridge: Clamp forward_delay when enabling STP
had a typo when attempting to clamp maximum forward delay.

It is possible to set bridge_forward_delay to be higher then
permitted maximum when STP is off.  When turning STP on, the
higher then allowed delay has to be clamed down to max value.

CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Reviewed-by: NVeaceslav Falico <vfalico@redhat.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sk_can_gso() should only be used as a hint in tcp_sendmsg() to build GSO
packets in the first place. (As a performance hint)

Once we have GSO packets in write queue, we can not decide they are no
longer GSO only because flow now uses a route which doesn't handle
TSO/GSO.

Core networking stack handles the case very well for us, all we need
is keeping track of packet counts in MSS terms, regardless of
segmentation done later (in GSO or hardware)

Right now, if  tcp_fragment() splits a GSO packet in two parts,
@left and @right, and route changed through a non GSO device,
both @left and @right have pcount set to 1, which is wrong,
and leads to incorrect packet_count tracking.

This problem was added in commit d5ac99a6 ("[TCP]: skb pcount with MTU
discovery")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Reported-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP stack should make sure it owns skbs before mangling them.

We had various crashes using bnx2x, and it turned out gso_size
was cleared right before bnx2x driver was populating TC descriptor
of the _previous_ packet send. TCP stack can sometime retransmit
packets that are still in Qdisc.

Of course we could make bnx2x driver more robust (using
ACCESS_ONCE(shinfo->gso_size) for example), but the bug is TCP stack.

We have identified two points where skb_unclone() was needed.

This patch adds a WARN_ON_ONCE() to warn us if we missed another
fix of this kind.

Kudos to Neal for finding the root cause of this bug. Its visible
using small MSS.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On receiving an ACK that covers the loss probe sequence, TLP
immediately sets the congestion state to Open, even though some packets
are not recovered and retransmisssion are on the way.  The later ACks
may trigger a WARN_ON check in step D of tcp_fastretrans_alert(), e.g.,
https://bugzilla.redhat.com/show_bug.cgi?id=989251

The fix is to follow the similar procedure in recovery by calling
tcp_try_keep_open(). The sender switches to Open state if no packets
are retransmissted. Otherwise it goes to Disorder and let subsequent
ACKs move the state to Recovery or Open.
Reported-By: NMichael Sterrett <michael@sterretts.net>
Tested-By: NDormando <dormando@rydia.net>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IP/IPv6 fragmentation knows how to compute only TCP/UDP checksum.
This causes problems if SCTP packets has to be fragmented and
ipsummed has been set to PARTIAL due to checksum offload support.
This condition can happen when retransmitting after MTU discover,
or when INIT or other control chunks are larger then MTU.
Check for the rare fragmentation condition in SCTP and use software
checksum calculation in this case.

CC: Fan Du <fan.du@windriver.com>
Signed-off-by: NVlad Yasevich <vyasevich@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

igb/ixgbe have hardware sctp checksum support, when this feature is enabled
and also IPsec is armed to protect sctp traffic, ugly things happened as
xfrm_output checks CHECKSUM_PARTIAL to do checksum operation(sum every thing
up and pack the 16bits result in the checksum field). The result is fail
establishment of sctp communication.

Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NVlad Yasevich <vyasevich@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a frame's timestamp is calculated, and the bitrate
calculation goes wrong and returns zero, the system
will attempt to divide by zero and crash. Catch this
case and print the rate information that the driver
reported when this happens.

Cc: stable@vger.kernel.org
Reported-by: NThomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

When parsing an invalid radiotap header, the parser can overrun
the buffer that is passed in because it doesn't correctly check
 1) the minimum radiotap header size
 2) the space for extended bitmaps

The first issue doesn't affect any in-kernel user as they all
check the minimum size before calling the radiotap function.
The second issue could potentially affect the kernel if an skb
is passed in that consists only of the radiotap header with a
lot of extended bitmaps that extend past the SKB. In that case
a read-only buffer overrun by at most 4 bytes is possible.

Fix this by adding the appropriate checks to the parser.

Cc: stable@vger.kernel.org
Reported-by: NEvan Huus <eapache@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The ip6_tnl.hlen (gre and ipv6 headers length) is independent from the
outgoing interface, so it would be better to initialize it even when no
route is found, otherwise its value will be zero.
While I'm not sure if this could happen in real life, but doing that
will avoid to call the skb_push function with a zero in ip6gre_header
function.
Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NOussama Ghorbel <ou.ghorbel@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netem can leak memory because packets get stored in red-black
tree and it is not cleared on reset.

Reported by: Сергеев Сергей <adron@yapic.net>
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When packet is dropped from rb-tree netem the backlog statistic should
also be updated.
Reported-by: NСергеев Сергей <adron@yapic.net>
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

François Cachereul made a very nice bug report and suspected
the bh_lock_sock() / bh_unlok_sock() pair used in l2tp_xmit_skb() from
process context was not good.

This problem was added by commit 6af88da1
("l2tp: Fix locking in l2tp_core.c").

l2tp_eth_dev_xmit() runs from BH context, so we must disable BH
from other l2tp_xmit_skb() users.

[  452.060011] BUG: soft lockup - CPU#1 stuck for 23s! [accel-pppd:6662]
[  452.061757] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core pppoe pppox
ppp_generic slhc ipv6 ext3 mbcache jbd virtio_balloon xfs exportfs dm_mod
virtio_blk ata_generic virtio_net floppy ata_piix libata virtio_pci virtio_ring virtio [last unloaded: scsi_wait_scan]
[  452.064012] CPU 1
[  452.080015] BUG: soft lockup - CPU#2 stuck for 23s! [accel-pppd:6643]
[  452.080015] CPU 2
[  452.080015]
[  452.080015] Pid: 6643, comm: accel-pppd Not tainted 3.2.46.mini #1 Bochs Bochs
[  452.080015] RIP: 0010:[<ffffffff81059f6c>]  [<ffffffff81059f6c>] do_raw_spin_lock+0x17/0x1f
[  452.080015] RSP: 0018:ffff88007125fc18  EFLAGS: 00000293
[  452.080015] RAX: 000000000000aba9 RBX: ffffffff811d0703 RCX: 0000000000000000
[  452.080015] RDX: 00000000000000ab RSI: ffff8800711f6896 RDI: ffff8800745c8110
[  452.080015] RBP: ffff88007125fc18 R08: 0000000000000020 R09: 0000000000000000
[  452.080015] R10: 0000000000000000 R11: 0000000000000280 R12: 0000000000000286
[  452.080015] R13: 0000000000000020 R14: 0000000000000240 R15: 0000000000000000
[  452.080015] FS:  00007fdc0cc24700(0000) GS:ffff8800b6f00000(0000) knlGS:0000000000000000
[  452.080015] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  452.080015] CR2: 00007fdb054899b8 CR3: 0000000074404000 CR4: 00000000000006a0
[  452.080015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  452.080015] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  452.080015] Process accel-pppd (pid: 6643, threadinfo ffff88007125e000, task ffff8800b27e6dd0)
[  452.080015] Stack:
[  452.080015]  ffff88007125fc28 ffffffff81256559 ffff88007125fc98 ffffffffa01b2bd1
[  452.080015]  ffff88007125fc58 000000000000000c 00000000029490d0 0000009c71dbe25e
[  452.080015]  000000000000005c 000000080000000e 0000000000000000 ffff880071170600
[  452.080015] Call Trace:
[  452.080015]  [<ffffffff81256559>] _raw_spin_lock+0xe/0x10
[  452.080015]  [<ffffffffa01b2bd1>] l2tp_xmit_skb+0x189/0x4ac [l2tp_core]
[  452.080015]  [<ffffffffa01c2d36>] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp]
[  452.080015]  [<ffffffff811c7872>] __sock_sendmsg_nosec+0x22/0x24
[  452.080015]  [<ffffffff811c83bd>] sock_sendmsg+0xa1/0xb6
[  452.080015]  [<ffffffff81254e88>] ? __schedule+0x5c1/0x616
[  452.080015]  [<ffffffff8103c7c6>] ? __dequeue_signal+0xb7/0x10c
[  452.080015]  [<ffffffff810bbd21>] ? fget_light+0x75/0x89
[  452.080015]  [<ffffffff811c8444>] ? sockfd_lookup_light+0x20/0x56
[  452.080015]  [<ffffffff811c9b34>] sys_sendto+0x10c/0x13b
[  452.080015]  [<ffffffff8125cac2>] system_call_fastpath+0x16/0x1b
[  452.080015] Code: 81 48 89 e5 72 0c 31 c0 48 81 ff 45 66 25 81 0f 92 c0 5d c3 55 b8 00 01 00 00 48 89 e5 f0 66 0f c1 07 0f b6 d4 38 d0 74 06 f3 90 <8a> 07 eb f6 5d c3 90 90 55 48 89 e5 9c 58 0f 1f 44 00 00 5d c3
[  452.080015] Call Trace:
[  452.080015]  [<ffffffff81256559>] _raw_spin_lock+0xe/0x10
[  452.080015]  [<ffffffffa01b2bd1>] l2tp_xmit_skb+0x189/0x4ac [l2tp_core]
[  452.080015]  [<ffffffffa01c2d36>] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp]
[  452.080015]  [<ffffffff811c7872>] __sock_sendmsg_nosec+0x22/0x24
[  452.080015]  [<ffffffff811c83bd>] sock_sendmsg+0xa1/0xb6
[  452.080015]  [<ffffffff81254e88>] ? __schedule+0x5c1/0x616
[  452.080015]  [<ffffffff8103c7c6>] ? __dequeue_signal+0xb7/0x10c
[  452.080015]  [<ffffffff810bbd21>] ? fget_light+0x75/0x89
[  452.080015]  [<ffffffff811c8444>] ? sockfd_lookup_light+0x20/0x56
[  452.080015]  [<ffffffff811c9b34>] sys_sendto+0x10c/0x13b
[  452.080015]  [<ffffffff8125cac2>] system_call_fastpath+0x16/0x1b
[  452.064012]
[  452.064012] Pid: 6662, comm: accel-pppd Not tainted 3.2.46.mini #1 Bochs Bochs
[  452.064012] RIP: 0010:[<ffffffff81059f6e>]  [<ffffffff81059f6e>] do_raw_spin_lock+0x19/0x1f
[  452.064012] RSP: 0018:ffff8800b6e83ba0  EFLAGS: 00000297
[  452.064012] RAX: 000000000000aaa9 RBX: ffff8800b6e83b40 RCX: 0000000000000002
[  452.064012] RDX: 00000000000000aa RSI: 000000000000000a RDI: ffff8800745c8110
[  452.064012] RBP: ffff8800b6e83ba0 R08: 000000000000c802 R09: 000000000000001c
[  452.064012] R10: ffff880071096c4e R11: 0000000000000006 R12: ffff8800b6e83b18
[  452.064012] R13: ffffffff8125d51e R14: ffff8800b6e83ba0 R15: ffff880072a589c0
[  452.064012] FS:  00007fdc0b81e700(0000) GS:ffff8800b6e80000(0000) knlGS:0000000000000000
[  452.064012] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  452.064012] CR2: 0000000000625208 CR3: 0000000074404000 CR4: 00000000000006a0
[  452.064012] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  452.064012] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  452.064012] Process accel-pppd (pid: 6662, threadinfo ffff88007129a000, task ffff8800744f7410)
[  452.064012] Stack:
[  452.064012]  ffff8800b6e83bb0 ffffffff81256559 ffff8800b6e83bc0 ffffffff8121c64a
[  452.064012]  ffff8800b6e83bf0 ffffffff8121ec7a ffff880072a589c0 ffff880071096c62
[  452.064012]  0000000000000011 ffffffff81430024 ffff8800b6e83c80 ffffffff8121f276
[  452.064012] Call Trace:
[  452.064012]  <IRQ>
[  452.064012]  [<ffffffff81256559>] _raw_spin_lock+0xe/0x10
[  452.064012]  [<ffffffff8121c64a>] spin_lock+0x9/0xb
[  452.064012]  [<ffffffff8121ec7a>] udp_queue_rcv_skb+0x186/0x269
[  452.064012]  [<ffffffff8121f276>] __udp4_lib_rcv+0x297/0x4ae
[  452.064012]  [<ffffffff8121c178>] ? raw_rcv+0xe9/0xf0
[  452.064012]  [<ffffffff8121f4a7>] udp_rcv+0x1a/0x1c
[  452.064012]  [<ffffffff811fe385>] ip_local_deliver_finish+0x12b/0x1a5
[  452.064012]  [<ffffffff811fe54e>] ip_local_deliver+0x53/0x84
[  452.064012]  [<ffffffff811fe1d0>] ip_rcv_finish+0x2bc/0x2f3
[  452.064012]  [<ffffffff811fe78f>] ip_rcv+0x210/0x269
[  452.064012]  [<ffffffff8101911e>] ? kvm_clock_get_cycles+0x9/0xb
[  452.064012]  [<ffffffff811d88cd>] __netif_receive_skb+0x3a5/0x3f7
[  452.064012]  [<ffffffff811d8eba>] netif_receive_skb+0x57/0x5e
[  452.064012]  [<ffffffff811cf30f>] ? __netdev_alloc_skb+0x1f/0x3b
[  452.064012]  [<ffffffffa0049126>] virtnet_poll+0x4ba/0x5a4 [virtio_net]
[  452.064012]  [<ffffffff811d9417>] net_rx_action+0x73/0x184
[  452.064012]  [<ffffffffa01b2cc2>] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core]
[  452.064012]  [<ffffffff810343b9>] __do_softirq+0xc3/0x1a8
[  452.064012]  [<ffffffff81013b56>] ? ack_APIC_irq+0x10/0x12
[  452.064012]  [<ffffffff81256559>] ? _raw_spin_lock+0xe/0x10
[  452.064012]  [<ffffffff8125e0ac>] call_softirq+0x1c/0x26
[  452.064012]  [<ffffffff81003587>] do_softirq+0x45/0x82
[  452.064012]  [<ffffffff81034667>] irq_exit+0x42/0x9c
[  452.064012]  [<ffffffff8125e146>] do_IRQ+0x8e/0xa5
[  452.064012]  [<ffffffff8125676e>] common_interrupt+0x6e/0x6e
[  452.064012]  <EOI>
[  452.064012]  [<ffffffff810b82a1>] ? kfree+0x8a/0xa3
[  452.064012]  [<ffffffffa01b2cc2>] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core]
[  452.064012]  [<ffffffffa01b2c25>] ? l2tp_xmit_skb+0x1dd/0x4ac [l2tp_core]
[  452.064012]  [<ffffffffa01c2d36>] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp]
[  452.064012]  [<ffffffff811c7872>] __sock_sendmsg_nosec+0x22/0x24
[  452.064012]  [<ffffffff811c83bd>] sock_sendmsg+0xa1/0xb6
[  452.064012]  [<ffffffff81254e88>] ? __schedule+0x5c1/0x616
[  452.064012]  [<ffffffff8103c7c6>] ? __dequeue_signal+0xb7/0x10c
[  452.064012]  [<ffffffff810bbd21>] ? fget_light+0x75/0x89
[  452.064012]  [<ffffffff811c8444>] ? sockfd_lookup_light+0x20/0x56
[  452.064012]  [<ffffffff811c9b34>] sys_sendto+0x10c/0x13b
[  452.064012]  [<ffffffff8125cac2>] system_call_fastpath+0x16/0x1b
[  452.064012] Code: 89 e5 72 0c 31 c0 48 81 ff 45 66 25 81 0f 92 c0 5d c3 55 b8 00 01 00 00 48 89 e5 f0 66 0f c1 07 0f b6 d4 38 d0 74 06 f3 90 8a 07 <eb> f6 5d c3 90 90 55 48 89 e5 9c 58 0f 1f 44 00 00 5d c3 55 48
[  452.064012] Call Trace:
[  452.064012]  <IRQ>  [<ffffffff81256559>] _raw_spin_lock+0xe/0x10
[  452.064012]  [<ffffffff8121c64a>] spin_lock+0x9/0xb
[  452.064012]  [<ffffffff8121ec7a>] udp_queue_rcv_skb+0x186/0x269
[  452.064012]  [<ffffffff8121f276>] __udp4_lib_rcv+0x297/0x4ae
[  452.064012]  [<ffffffff8121c178>] ? raw_rcv+0xe9/0xf0
[  452.064012]  [<ffffffff8121f4a7>] udp_rcv+0x1a/0x1c
[  452.064012]  [<ffffffff811fe385>] ip_local_deliver_finish+0x12b/0x1a5
[  452.064012]  [<ffffffff811fe54e>] ip_local_deliver+0x53/0x84
[  452.064012]  [<ffffffff811fe1d0>] ip_rcv_finish+0x2bc/0x2f3
[  452.064012]  [<ffffffff811fe78f>] ip_rcv+0x210/0x269
[  452.064012]  [<ffffffff8101911e>] ? kvm_clock_get_cycles+0x9/0xb
[  452.064012]  [<ffffffff811d88cd>] __netif_receive_skb+0x3a5/0x3f7
[  452.064012]  [<ffffffff811d8eba>] netif_receive_skb+0x57/0x5e
[  452.064012]  [<ffffffff811cf30f>] ? __netdev_alloc_skb+0x1f/0x3b
[  452.064012]  [<ffffffffa0049126>] virtnet_poll+0x4ba/0x5a4 [virtio_net]
[  452.064012]  [<ffffffff811d9417>] net_rx_action+0x73/0x184
[  452.064012]  [<ffffffffa01b2cc2>] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core]
[  452.064012]  [<ffffffff810343b9>] __do_softirq+0xc3/0x1a8
[  452.064012]  [<ffffffff81013b56>] ? ack_APIC_irq+0x10/0x12
[  452.064012]  [<ffffffff81256559>] ? _raw_spin_lock+0xe/0x10
[  452.064012]  [<ffffffff8125e0ac>] call_softirq+0x1c/0x26
[  452.064012]  [<ffffffff81003587>] do_softirq+0x45/0x82
[  452.064012]  [<ffffffff81034667>] irq_exit+0x42/0x9c
[  452.064012]  [<ffffffff8125e146>] do_IRQ+0x8e/0xa5
[  452.064012]  [<ffffffff8125676e>] common_interrupt+0x6e/0x6e
[  452.064012]  <EOI>  [<ffffffff810b82a1>] ? kfree+0x8a/0xa3
[  452.064012]  [<ffffffffa01b2cc2>] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core]
[  452.064012]  [<ffffffffa01b2c25>] ? l2tp_xmit_skb+0x1dd/0x4ac [l2tp_core]
[  452.064012]  [<ffffffffa01c2d36>] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp]
[  452.064012]  [<ffffffff811c7872>] __sock_sendmsg_nosec+0x22/0x24
[  452.064012]  [<ffffffff811c83bd>] sock_sendmsg+0xa1/0xb6
[  452.064012]  [<ffffffff81254e88>] ? __schedule+0x5c1/0x616
[  452.064012]  [<ffffffff8103c7c6>] ? __dequeue_signal+0xb7/0x10c
[  452.064012]  [<ffffffff810bbd21>] ? fget_light+0x75/0x89
[  452.064012]  [<ffffffff811c8444>] ? sockfd_lookup_light+0x20/0x56
[  452.064012]  [<ffffffff811c9b34>] sys_sendto+0x10c/0x13b
[  452.064012]  [<ffffffff8125cac2>] system_call_fastpath+0x16/0x1b
Reported-by: NFrançois Cachereul <f.cachereul@alphalink.fr>
Tested-by: NFrançois Cachereul <f.cachereul@alphalink.fr>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes and improves the use of vti interfaces (while
lightly changing the way of configuring them).

Currently:

- it is necessary to identify and mark inbound IPsec
  packets destined to each vti interface, via netfilter rules in
  the mangle table at prerouting hook.

- the vti module cannot retrieve the right tunnel in input since
  commit b9959fd3: vti tunnels all have an i_key, but the tunnel lookup
  is done with flag TUNNEL_NO_KEY, so there no chance to retrieve them.

- the i_key is used by the outbound processing as a mark to lookup
  for the right SP and SA bundle.

This patch uses the o_key to store the vti mark (instead of i_key) and
enables:

- to avoid the need for previously marking the inbound skbuffs via a
  netfilter rule.
- to properly retrieve the right tunnel in input, only based on the IPsec
  packet outer addresses.
- to properly perform an inbound policy check (using the tunnel o_key
  as a mark).
- to properly perform an outbound SPD and SAD lookup (using the tunnel
  o_key as a mark).
- to keep the current mark of the skbuff. The skbuff mark is neither
  used nor changed by the vti interface. Only the vti interface o_key
  is used.

SAs have a wildcard mark.
SPs have a mark equal to the vti interface o_key.

The vti interface must be created as follows (i_key = 0, o_key = mark):

   ip link add vti1 mode vti local 1.1.1.1 remote 2.2.2.2 okey 1

The SPs attached to vti1 must be created as follows (mark = vti1 o_key):

   ip xfrm policy add dir out mark 1 tmpl src 1.1.1.1 dst 2.2.2.2 \
      proto esp mode tunnel
   ip xfrm policy add dir in  mark 1 tmpl src 2.2.2.2 dst 1.1.1.1 \
      proto esp mode tunnel

The SAs are created with the default wildcard mark. There is no
distinction between global vs. vti SAs. Just their addresses will
possibly link them to a vti interface:

   ip xfrm state add src 1.1.1.1 dst 2.2.2.2 proto esp spi 1000 mode tunnel \
                 enc "cbc(aes)" "azertyuiopqsdfgh"

   ip xfrm state add src 2.2.2.2 dst 1.1.1.1 proto esp spi 2000 mode tunnel \
                 enc "cbc(aes)" "sqbdhgqsdjqjsdfh"

To avoid matching "global" (not vti) SPs in vti interfaces, global SPs
should no use the default wildcard mark, but explicitly match mark 0.

To avoid a double SPD lookup in input and output (in global and vti SPDs),
the NOPOLICY and NOXFRM options should be set on the vti interfaces:

   echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_policy
   echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_xfrm

The outgoing traffic is steered to vti1 by a route via the vti interface:

   ip route add 192.168.0.0/16 dev vti1

The incoming IPsec traffic is steered to vti1 because its outer addresses
match the vti1 tunnel configuration.
Signed-off-by: NChristophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 9f00b2e7
	bridge: only expire the mdb entry when query is received
changed the mdb expiration timer to be armed only when QUERY is
received.  Howerver, this causes issues in an environment where
the multicast server socket comes and goes very fast while a client
is trying to send traffic to it.

The root cause is a race where a sequence of LEAVE followed by REPORT
messages can race against QUERY messages generated in response to LEAVE.
The QUERY ends up starting the expiration timer, and that timer can
potentially expire after the new REPORT message has been received signaling
the new join operation.  This leads to a significant drop in multicast
traffic and possible complete stall.

The solution is to have REPORT messages update the expiration timer
on entries that already exist.

CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net_secret() is only used when CONFIG_IPV6 or CONFIG_INET are selected.

Building a defconfig with both of these symbols unselected (Using the ARM
at91sam9rl_defconfig, for example) leads to the following build warning:

$ make at91sam9rl_defconfig
#
# configuration written to .config
#

$ make net/core/secure_seq.o
scripts/kconfig/conf --silentoldconfig Kconfig
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
  CALL    scripts/checksyscalls.sh
  CC      net/core/secure_seq.o
net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function]

Fix this warning by protecting the definition of net_secret() with these
symbols.
Reported-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since P2P device doesn't have a netdev associated to it,
we cannot prevent the user to start it when in RFKILL.
So refuse to even add it when in RFKILL.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

__ieee80211_scan_completed is called from a worker. This
means that the following flow is possible.

 * driver calls ieee80211_scan_completed
 * mac80211 cancels the scan (that is already complete)
 * __ieee80211_scan_completed runs

When scan_work will finally run, it will see that the scan
hasn't been aborted and might even trigger another scan on
another band. This leads to a situation where cfg80211's
scan is not done and no further scan can be issued.

Fix this by setting a new flag when a HW scan is being
cancelled so that no other scan will be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Steinar reported FQ pacing was not working for UDP flows.

It looks like the initial sk->sk_pacing_rate value of 0 was
a wrong choice. We should init it to ~0U (unlimited)

Then, TCA_FQ_FLOW_DEFAULT_RATE should be removed because it makes
no real sense. The default rate is really unlimited, and we
need to avoid a zero divide.
Reported-by: NSteinar H. Gunderson <sesse@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the calculation of the nlmsg size, by adding the missing
nla_total_size().

Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCA_FQ_INITIAL_QUANTUM should set q->initial_quantum
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unlike ipv4, the struct member hlen holds the length of the GRE and ipv6
headers. This length is also counted in dev->hard_header_len.
Perhaps, it's more clean to modify the hlen to count only the GRE header
without ipv6 header as the variable name suggest, but the simple way to fix
this without regression risk is simply modify the calculation of the limit
in ip6gre_tunnel_change_mtu function.
Verified in kernel version v3.11.
Signed-off-by: NOussama Ghorbel <ou.ghorbel@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/l2tp/l2tp_core.c: In function ‘l2tp_verify_udp_checksum’:
net/l2tp/l2tp_core.c:499:22: warning: unused variable ‘tunnel’ [-Wunused-variable]

Create a helper "l2tp_tunnel()" to facilitate this, and as a side
effect get rid of a bunch of unnecessary void pointer casts.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a lowpan link to a wpan device is created, set the hardware address
of the lowpan link to that of the wpan device.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refuse to create 6lowpan links if the actual hardware interface is
of any type other than ARPHRD_IEEE802154.
Signed-off-by: NAlan Ott <alan@signal11.us>
Suggested-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We might dreference a NULL pointer if the hold_queue is empty,
so add a check to avoid this.

Bug was introduced with git commit a0073fe1 ("xfrm: Add a state
resolution packet queue")
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

We need to ensure that policies can't go away as long as the hold timer
is armed, so take a refcont when we arm the timer and drop one if we
delete it.

Bug was introduced with git commit a0073fe1 ("xfrm: Add a state
resolution packet queue")
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

On Tue, 20 Aug 2013 11:40:04 -0500 Eric Sandeen <sandeen@redhat.com> wrote:
> This was brought up in a Red Hat bug (which may be marked private, I'm sorry):
>
> Bug 987055 - open O_WRONLY succeeds on some root owned files in /proc for process running with unprivileged EUID
>
> "On RHEL7 some of the files in /proc can be opened for writing by an unprivileged EUID."
>
> The flaw existed upstream as well last I checked.
>
> This commit in kernel v3.8 caused the regression:
>
> commit cff10976
> Author: Eric W. Biederman <ebiederm@xmission.com>
> Date:   Fri Nov 16 03:03:01 2012 +0000
>
>     net: Update the per network namespace sysctls to be available to the network namespace owner
>
>     - Allow anyone with CAP_NET_ADMIN rights in the user namespace of the
>       the netowrk namespace to change sysctls.
>     - Allow anyone the uid of the user namespace root the same
>       permissions over the network namespace sysctls as the global root.
>     - Allow anyone with gid of the user namespace root group the same
>       permissions over the network namespace sysctl as the global root group.
>
>     Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
>     Signed-off-by: David S. Miller <davem@davemloft.net>
>
> because it changed /sys/net's special permission handler to test current_uid, not
> current_euid; same for current_gid/current_egid.
>
> So in this case, root cannot drop privs via set[ug]id, and retains all privs
> in this codepath.

Modify the code to use current_euid(), and in_egroup_p, as in done
in fs/proc/proc_sysctl.c:test_perm()

Cc: stable@vger.kernel.org
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Reported-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sending out multicast messages, the source address in inet->mc_addr is
ignored and rewritten by an autoselected one. This is caused by a typo in
commit 813b3b5d ("ipv4: Use caller's on-stack flowi as-is in output
route lookups").
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

on x86 system with net.core.bpf_jit_enable = 1

sudo tcpdump -i eth1 'tcp port 22'

causes the warning:
[   56.766097]  Possible unsafe locking scenario:
[   56.766097]
[   56.780146]        CPU0
[   56.786807]        ----
[   56.793188]   lock(&(&vb->lock)->rlock);
[   56.799593]   <Interrupt>
[   56.805889]     lock(&(&vb->lock)->rlock);
[   56.812266]
[   56.812266]  *** DEADLOCK ***
[   56.812266]
[   56.830670] 1 lock held by ksoftirqd/1/13:
[   56.836838]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff8118f44c>] vm_unmap_aliases+0x8c/0x380
[   56.849757]
[   56.849757] stack backtrace:
[   56.862194] CPU: 1 PID: 13 Comm: ksoftirqd/1 Not tainted 3.12.0-rc3+ #45
[   56.868721] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[   56.882004]  ffffffff821944c0 ffff88080bbdb8c8 ffffffff8175a145 0000000000000007
[   56.895630]  ffff88080bbd5f40 ffff88080bbdb928 ffffffff81755b14 0000000000000001
[   56.909313]  ffff880800000001 ffff880800000000 ffffffff8101178f 0000000000000001
[   56.923006] Call Trace:
[   56.929532]  [<ffffffff8175a145>] dump_stack+0x55/0x76
[   56.936067]  [<ffffffff81755b14>] print_usage_bug+0x1f7/0x208
[   56.942445]  [<ffffffff8101178f>] ? save_stack_trace+0x2f/0x50
[   56.948932]  [<ffffffff810cc0a0>] ? check_usage_backwards+0x150/0x150
[   56.955470]  [<ffffffff810ccb52>] mark_lock+0x282/0x2c0
[   56.961945]  [<ffffffff810ccfed>] __lock_acquire+0x45d/0x1d50
[   56.968474]  [<ffffffff810cce6e>] ? __lock_acquire+0x2de/0x1d50
[   56.975140]  [<ffffffff81393bf5>] ? cpumask_next_and+0x55/0x90
[   56.981942]  [<ffffffff810cef72>] lock_acquire+0x92/0x1d0
[   56.988745]  [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380
[   56.995619]  [<ffffffff817628f1>] _raw_spin_lock+0x41/0x50
[   57.002493]  [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380
[   57.009447]  [<ffffffff8118f52a>] vm_unmap_aliases+0x16a/0x380
[   57.016477]  [<ffffffff8118f44c>] ? vm_unmap_aliases+0x8c/0x380
[   57.023607]  [<ffffffff810436b0>] change_page_attr_set_clr+0xc0/0x460
[   57.030818]  [<ffffffff810cfb8d>] ? trace_hardirqs_on+0xd/0x10
[   57.037896]  [<ffffffff811a8330>] ? kmem_cache_free+0xb0/0x2b0
[   57.044789]  [<ffffffff811b59c3>] ? free_object_rcu+0x93/0xa0
[   57.051720]  [<ffffffff81043d9f>] set_memory_rw+0x2f/0x40
[   57.058727]  [<ffffffff8104e17c>] bpf_jit_free+0x2c/0x40
[   57.065577]  [<ffffffff81642cba>] sk_filter_release_rcu+0x1a/0x30
[   57.072338]  [<ffffffff811108e2>] rcu_process_callbacks+0x202/0x7c0
[   57.078962]  [<ffffffff81057f17>] __do_softirq+0xf7/0x3f0
[   57.085373]  [<ffffffff81058245>] run_ksoftirqd+0x35/0x70

cannot reuse jited filter memory, since it's readonly,
so use original bpf insns memory to hold work_struct

defer kfree of sk_filter until jit completed freeing

tested on x86_64 and i386
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The (inner) MTU of a ipip6 (IPv4-in-IPv6) tunnel cannot be set below 1280, which is the minimum MTU in IPv6.
However, there should be no IPv6 on the tunnel interface at all, so the IPv6 rules should not apply.
More info at https://bugzilla.kernel.org/show_bug.cgi?id=15530

This patch allows to check the minimum MTU for ipv6 tunnel according to these rules:
-In case the tunnel is configured with ipip6 mode the minimum MTU is 68.
-In case the tunnel is configured with ip6ip6 or any mode the minimum MTU is 1280.
Signed-off-by: NOussama Ghorbel <ou.ghorbel@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

virtio wants to pass in cpumask_of(cpu), make parameter
const to avoid build warnings.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuchung found following problem :

 There are bugs in the SACK processing code, merging part in
 tcp_shift_skb_data(), that incorrectly resets or ignores the sacked
 skbs FIN flag. When a receiver first SACK the FIN sequence, and later
 throw away ofo queue (e.g., sack-reneging), the sender will stop
 retransmitting the FIN flag, and hangs forever.

Following packetdrill test can be used to reproduce the bug.

$ cat sack-merge-bug.pkt
`sysctl -q net.ipv4.tcp_fack=0`

// Establish a connection and send 10 MSS.
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+.000 bind(3, ..., ...) = 0
+.000 listen(3, 1) = 0

+.050 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+.000 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6>
+.001 < . 1:1(0) ack 1 win 1024
+.000 accept(3, ..., ...) = 4

+.100 write(4, ..., 12000) = 12000
+.000 shutdown(4, SHUT_WR) = 0
+.000 > . 1:10001(10000) ack 1
+.050 < . 1:1(0) ack 2001 win 257
+.000 > FP. 10001:12001(2000) ack 1
+.050 < . 1:1(0) ack 2001 win 257 <sack 10001:11001,nop,nop>
+.050 < . 1:1(0) ack 2001 win 257 <sack 10001:12002,nop,nop>
// SACK reneg
+.050 < . 1:1(0) ack 12001 win 257
+0 %{ print "unacked: ",tcpi_unacked }%
+5 %{ print "" }%

First, a typo inverted left/right of one OR operation, then
code forgot to advance end_seq if the merged skb carried FIN.

Bug was added in 2.6.29 by commit 832d11c5
("tcp: Try to restore large SKBs while SACK processing")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to cap ->msg_namelen or it leads to a buffer overflow when we
to the memcpy() in __audit_sockaddr().  It requires CAP_AUDIT_CONTROL to
exploit this bug.

The call tree is:
___sys_recvmsg()
  move_addr_to_user()
    audit_sockaddr()
      __audit_sockaddr()
Reported-by: NJüri Aedla <juri.aedla@gmail.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv4 mapped addresses cause kernel panic.
The patch juste check whether the IPv6 address is an IPv4 mapped
address. If so, use IPv4 API instead of IPv6.

[  940.026915] general protection fault: 0000 [#1]
[  940.026915] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core pppox ppp_generic slhc loop psmouse
[  940.026915] CPU: 0 PID: 3184 Comm: memcheck-amd64- Not tainted 3.11.0+ #1
[  940.026915] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  940.026915] task: ffff880007130e20 ti: ffff88000737e000 task.ti: ffff88000737e000
[  940.026915] RIP: 0010:[<ffffffff81333780>]  [<ffffffff81333780>] ip6_xmit+0x276/0x326
[  940.026915] RSP: 0018:ffff88000737fd28  EFLAGS: 00010286
[  940.026915] RAX: c748521a75ceff48 RBX: ffff880000c30800 RCX: 0000000000000000
[  940.026915] RDX: ffff88000075cc4e RSI: 0000000000000028 RDI: ffff8800060e5a40
[  940.026915] RBP: ffff8800060e5a40 R08: 0000000000000000 R09: ffff88000075cc90
[  940.026915] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88000737fda0
[  940.026915] R13: 0000000000000000 R14: 0000000000002000 R15: ffff880005d3b580
[  940.026915] FS:  00007f163dc5e800(0000) GS:ffffffff81623000(0000) knlGS:0000000000000000
[  940.026915] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  940.026915] CR2: 00000004032dc940 CR3: 0000000005c25000 CR4: 00000000000006f0
[  940.026915] Stack:
[  940.026915]  ffff88000075cc4e ffffffff81694e90 ffff880000c30b38 0000000000000020
[  940.026915]  11000000523c4bac ffff88000737fdb4 0000000000000000 ffff880000c30800
[  940.026915]  ffff880005d3b580 ffff880000c30b38 ffff8800060e5a40 0000000000000020
[  940.026915] Call Trace:
[  940.026915]  [<ffffffff81356cc3>] ? inet6_csk_xmit+0xa4/0xc4
[  940.026915]  [<ffffffffa0038535>] ? l2tp_xmit_skb+0x503/0x55a [l2tp_core]
[  940.026915]  [<ffffffff812b8d3b>] ? pskb_expand_head+0x161/0x214
[  940.026915]  [<ffffffffa003e91d>] ? pppol2tp_xmit+0xf2/0x143 [l2tp_ppp]
[  940.026915]  [<ffffffffa00292e0>] ? ppp_channel_push+0x36/0x8b [ppp_generic]
[  940.026915]  [<ffffffffa00293fe>] ? ppp_write+0xaf/0xc5 [ppp_generic]
[  940.026915]  [<ffffffff8110ead4>] ? vfs_write+0xa2/0x106
[  940.026915]  [<ffffffff8110edd6>] ? SyS_write+0x56/0x8a
[  940.026915]  [<ffffffff81378ac0>] ? system_call_fastpath+0x16/0x1b
[  940.026915] Code: 00 49 8b 8f d8 00 00 00 66 83 7c 11 02 00 74 60 49
8b 47 58 48 83 e0 fe 48 8b 80 18 01 00 00 48 85 c0 74 13 48 8b 80 78 02
00 00 <48> ff 40 28 41 8b 57 68 48 01 50 30 48 8b 54 24 08 49 c7 c1 51
[  940.026915] RIP  [<ffffffff81333780>] ip6_xmit+0x276/0x326
[  940.026915]  RSP <ffff88000737fd28>
[  940.057945] ---[ end trace be8aba9a61c8b7f3 ]---
[  940.058583] Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: NFrançois CACHEREUL <f.cachereul@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 3ab5aee7 ("net: Convert TCP & DCCP hash tables to use RCU /
hlist_nulls") incorrectly used sock_put() on TIMEWAIT sockets.

We should instead use inet_twsk_put()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_established_options assumes opts->options is 0 before calling,
as it read modify writes it.

For the tcp_current_mss() case the opts structure is not zeroed,
so this can be done with uninitialized values.

This is ok, because ->options is not read in this path.
But it's still better to avoid the operation on the uninitialized
field. This shuts up a static code analyzer, and presumably
may help the optimizer.

Cc: netdev@vger.kernel.org
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When filling the netlink message we miss to wipe the pad field,
therefore leak one byte of heap memory to userland. Fix this by
setting pad to 0.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

batman-adv saves its table of packet handlers as a global state, so handlers
must be set up only once (and setting them up a second time will fail).

The recently-added network coding support tries to set up its handler each time
a new softif is registered, which obviously fails when more that one softif is
used (and in consequence, the softif creation fails).

Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called
only once) and batadv_nc_mesh_init (which is called for each softif); in
addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming
consistent.
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

FQ rate limiting suffers from two problems, reported
by Steinar :

1) FQ enforces a delay when flow quantum is exhausted in order
to reduce cpu overhead. But if packets are small, current
delay computation is slightly wrong, and observed rates can
be too high.

Steinar had this problem because he disabled TSO and GSO,
and default FQ quantum is 2*1514.

(Of course, I wish recent TSO auto sizing changes will help
to not having to disable TSO in the first place)

2) maxrate was not used for forwarded flows (skbs not attached
to a socket)

Tested:

tc qdisc add dev eth0 root est 1sec 4sec fq maxrate 8Mbit
netperf -H lpq84 -l 1000 &
sleep 10 ; tc -s qdisc show dev eth0
qdisc fq 8003: root refcnt 32 limit 10000p flow_limit 100p buckets 1024
 quantum 3028 initial_quantum 15140 maxrate 8000Kbit
 Sent 16819357 bytes 11258 pkt (dropped 0, overlimits 0 requeues 0)
 rate 7831Kbit 653pps backlog 7570b 5p requeues 0
  44 flows (43 inactive, 1 throttled), next packet delay 2977352 ns
  0 gc, 0 highprio, 5545 throttled

lpq83:~# tcpdump -p -i eth0 host lpq84 -c 12
09:02:52.079484 IP lpq83 > lpq84: . 1389536928:1389538376(1448) ack 3808678021 win 457 <nop,nop,timestamp 961812 572609068>
09:02:52.079499 IP lpq83 > lpq84: . 1448:2896(1448) ack 1 win 457 <nop,nop,timestamp 961812 572609068>
09:02:52.079906 IP lpq84 > lpq83: . ack 2896 win 16384 <nop,nop,timestamp 572609080 961812>
09:02:52.082568 IP lpq83 > lpq84: . 2896:4344(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071>
09:02:52.082581 IP lpq83 > lpq84: . 4344:5792(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071>
09:02:52.083017 IP lpq84 > lpq83: . ack 5792 win 16384 <nop,nop,timestamp 572609083 961815>
09:02:52.085678 IP lpq83 > lpq84: . 5792:7240(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074>
09:02:52.085693 IP lpq83 > lpq84: . 7240:8688(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074>
09:02:52.086117 IP lpq84 > lpq83: . ack 8688 win 16384 <nop,nop,timestamp 572609086 961818>
09:02:52.088792 IP lpq83 > lpq84: . 8688:10136(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077>
09:02:52.088806 IP lpq83 > lpq84: . 10136:11584(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077>
09:02:52.089217 IP lpq84 > lpq83: . ack 11584 win 16384 <nop,nop,timestamp 572609090 961821>
Reported-by: NSteinar H. Gunderson <sesse@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rtnl ops where introduced by c075b130 ("ip6tnl: advertise tunnel param via
rtnl"), but I forget to assign rtnl ops to fb tunnels.

Now that it is done, we must remove the explicit call to
unregister_netdevice_queue(), because  the fallback tunnel is added to the queue
in ip6_tnl_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this
is valid since commit 0bd87628 ("ip6tnl: add x-netns support")).
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>