The subh->err_hdr should point to the error header, not the data.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IP_CT_TCP_FLAG_CLOSE_INIT is a flag and should have a value of 0x4 instead
of 0x3, which is IP_CT_TCP_FLAG_WINDOW_SCALE | IP_CT_TCP_FLAG_SACK_PERM.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When loading the NAT module, existing connection tracking entries don't
have room for NAT information allocated and packets are dropped, causing
hanging connections. They really should be entered into the NAT table
as NULL mappings, but the current allocation scheme doesn't allow this.

For now simply accept those packets to avoid the hanging connections.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The included patch translates arpt_counters to xt_counters, making
userspace arptables compile against recent kernels.
Signed-off-by: NBart De Schuymer <bdschuym@pandora.be>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When IPv6 connection tracking splits up a defragmented packet into
its original fragments, the packets are taken from a list and are
passed to the network stack with skb->next still set. This causes
dev_hard_start_xmit to treat them as GSO fragments, resulting in
a use after free when connection tracking handles the next fragment.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] version 1.0.14rc1
  [ALSA] usbaudio - Fix kobject_add() error at reconnection
  [ALSA] usb: usbmixer error path fix
  [ALSA] _snd_cmipci_uswitch_put doesn't set zero flags
  [ALSA] hda-codec - Fix NULL dereference in generic hda code
  [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH9
  [ALSA] usb-audio: work around wrong frequency in CM6501 descriptors
  [ALSA] Fix potential NULL pointer dereference in echoaudio midi
  [ALSA] Audio: Add nvidia HD Audio controllers of MCP67 support to hda_intel.c

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: Fix iov_len calculation in tcp_v4_send_ack().
  [NETFILTER]: nf_conntrack_netbios_ns: fix uninitialized member in expectation
  [TG3]: Add PHY workaround for 5755M.
  [BNX2]: Update version and reldate.
  [BNX2]: Fix bug in bnx2_nvram_write().
  [BNX2]: Fix 5709 Serdes detection.
  [BNX2]: Don't apply CRC PHY workaround to 5709.
  NetLabel: correct CIPSO tag handling when adding new DOI definitions
  NetLabel: correct locking in selinux_netlbl_socket_setsid()
  [Bluetooth] Correct SCO buffer for Broadcom based Dell laptops
  [Bluetooth] Correct SCO buffer for Broadcom based HP laptops
  [Bluetooth] Correct SCO buffer size for another ThinkPad laptop
  [Bluetooth] Handle device registration failures
  [Bluetooth] Fix uninitialized return value for RFCOMM sendmsg()
  [Bluetooth] More checks if DLC is still attached to the TTY
  [Bluetooth] Add packet size checks for CAPI messages
  [X25]: Trivial, SOCK_DEBUG's in x25_facilities missing newlines
  [INET]: Fix incorrect "inet_sock->is_icsk" assignment.

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  pcnet_cs : add new id
  chelsio: error path fix
  s390: iucv Kconfig help description changes
  s390: qeth driver fixes: atomic context fixups
  s390: qeth driver fixes: packet socket
  s390: qeth driver fixes: VLAN hdr, perf stats
  forcedeth: sideband management fix
  Revert "[PATCH] e1000: disable TSO on the 82544 with slab debugging"
  qeth: fix uaccess handling and get rid of unused variable
  qla3xxx: Add delay to NVRAM register access.
  qla3xxx: Remove NETIF_F_LLTX from driver features.
  ixgb: Write RA register high word first, increment version
  ixgb: Maybe stop TX if not enough free descriptors
  ixgb: Fix early TSO completion
  [PATCH] ipw2100: Fix dropping fragmented small packet problem
  [PATCH] ieee80211: WLAN_GET_SEQ_SEQ fix (select correct region)

* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix bugs in the hypervisor call stats code
  [POWERPC] Fix corruption in hcall9
  [POWERPC] iSeries: fix setup initcall
  [POWERPC] iSeries: fix viopath initialisation
  [POWERPC] iSeries: fix lpevents initialisation
  [POWERPC] iSeries: fix proc/iSeries initialisation
  [POWERPC] iSeries: fix mf proc initialisation
  [POWERPC] disable PReP and EFIKA during make oldconfig
  [POWERPC] Fix mpc52xx serial driver to work for arch/ppc again
  [POWERPC] Don't include powerpc/sysdev/rom.o for arch/ppc builds
  [POWERPC] Fix mpc52xx fdt to use correct device_type for sound devices
  [POWERPC] 52xx: Don't use device_initcall to probe of_platform_bus
  [POWERPC] Add legacy iSeries to ppc64_defconfig
  [POWERPC] Update ppc64_defconfig
  [POWERPC] Fix manual assembly WARN_ON() in enter_rtas().
  [POWERPC] Avoid calling get_irq_server() with a real, not virtual irq.
  [POWERPC] Fix unbalanced uses of of_node_put
  [POWERPC] Fix bogus BUG_ON() in in hugetlb_get_unmapped_area()

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] locking problem with __cpcmd.
  [S390] don't call handle_mm_fault() if in an atomic context.
  [S390] Fix vmalloc area size calculation.
  [S390] Fix cpu hotplug (missing 'online' attribute).
  [S390] cio: use barrier() in stsch_reset.
  [S390] memory detection misses 128k.

The sis96x SMBus PCI device depends on two different quirks to run
in a specific order.  Apart from being fragile, this was found to
actually break on (at least) recent FC4, FC5, and FC6 kernels.  This
patch fixes the quirks so that they work without relying on the
compiler and/or linker to put them in any specific order.

  http://lists.lm-sensors.org/pipermail/lm-sensors/2006-April/015962.html
  https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=189719

I tested this patch.
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Greg K-H <greg@kroah.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Changeset 740b5706 moved the protecting
spinlock from __cpcmd to cpcmd. Therefore vmcp can no longer use __cpcmd,
instead we have to use cpcmd.
Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

There are several places in the futex code where a spin_lock is held
and still uaccesses happen. Deadlocks are avoided by increasing the
preempt count. The pagefault handler will then not take any locks
but will immediately search the fixup tables.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

setup_memory_end() uses VMALLOC_END instead of VMALLOC_END_INIT to
calculate the maximum supported size of physical memory. Since
VMALLOC_END is zero, this will cause a crash on 31 bit systems.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

72486f1f inverts the logic if an
'online' attribute in /sys/devices/system/cpu/cpuX should appear.
So we end up with no hotpluggable cpus at all...
Set the hotpluggable value to one to make sure the online
attribute appears again.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use barrier() in stsch_reset() instead of duplicating the stsch()
inline assembly and adding "memory" to the clobberlist.
Pointed out by Chuck Ebbert.

Real fix would be to add a fixup section to the stsch() and extend the
basic program check handler so it searches the exception tables in case
of a program check.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix a memory leak problem in the memory detection routines.  A memory leak
of 128k occurs when we have a contiguous memory with mixed access-mode
(read or write) ranges.
Signed-off-by: NHongjie Yang <hongjie@us.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This fixes the ftp stalls present in the current kernels.

All credit goes to Komuro <komurojun-mbn@nifty.com> for tracking
this down. The patch is untested but it looks *cough* obviously
correct.
Signed-off-by: NCraig Schlenter <craig@codefountain.com>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

->helper is uninitialized in the expectation registered by the netbios_ns
helper and it later copied to the expected connection, which causes invalid
memory dereferences when trying to call the helper.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some PHY trim values need to be fine-tuned on 5755M to be
IEEE-compliant.

Update version to 3.72.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update version to 1.5.3.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bug was a bogus pointer being passed to kfree().  The pointer was
incremented in the write loop and then passed to kfree().

The fix is to use align_buf to save the original address.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

5709 has a new register to detect copper/fiber PHYs.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The workaround is only needed on 5706/5708 and cannot be applied on
5709.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current netlbl_cipsov4_add_common() function has two problems which are
fixed with this patch.  The first is an off-by-one bug where it is possibile to
overflow the doi_def->tags[] array.  The second is a bug where the same
doi_def->tags[] array was not always fully initialized, which caused sporadic
failures.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The spinlock protecting the update of the "sksec->nlbl_state" variable is not
currently softirq safe which can lead to problems.  This patch fixes this by
changing the spin_{un}lock() functions into spin_{un}lock_bh() functions.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The SCO buffer size values on Dell laptops with a Bluetooth chip from
Broadcom are wrong. The USB Bluetooth driver has to set a quirk to
correct the SCO buffer size values.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The SCO buffer size values on HP laptops with a Bluetooth chip from
Broadcom are wrong. The USB Bluetooth driver has to set a quirk to
correct the SCO buffer size values.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The ThinkPad R60E uses a Broadcom based Bluetooth chip and even this
version needs the quirk to correct the SCO buffer size values.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In the case the device registration for a new Bluetooth low-level
connection fails there is no need to unregister it when the temporary
data structure has been removed.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When calling send() with a zero length parameter on a RFCOMM socket
it returns a positive value. In this rare case the variable err is
used uninitialized and unfortunately its value is returned.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If the DLC device is no longer attached to the TTY device, then return
errors or default values for various callbacks of the TTY layer.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

With malformed packets it might be possible to overwrite internal
CMTP and CAPI data structures. This patch adds additional length
checks to prevent these kinds of remote attacks.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Trivial. Newlines missing on the SOCK_DEBUG's for X.25 facility
negotiation.
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The inet_create() and inet6_create() functions incorrectly set the
inet_sock->is_icsk field.  Both functions assume that the is_icsk field is
large enough to hold at least a INET_PROTOSW_ICSK value when it is actually
only a single bit.  This patch corrects the assignment by doing a boolean
comparison whose result will safely fit into a single bit field.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed the error from kobject_add() at reconnection the usb audio device.
This happens when an app keeps opening a device while the device is
replugged, due to the confliction of the internal bookkept index and
the really empty slot.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Without the patch below namelist[0] will not be freed in case
of kmalloc error.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Playing with spdif output on cmipci i've noticed the SPDO5V option does
not change appropriate bits the register.
The _snd_cmipci_uswitch_put checks the change in flags in wrong way.
If 'active' state of an option corresponds to a _zero_ bits in a hw
register then function fails. The SPDO5V is the sample.
In the most cases 'active' state of option is set through an non-zerio
bits in a register. This case works fine.
The fix attached.
Unfortunately i was unable to change spdif output voltage anyway.
Although the register changes right at least.
From: Timofei V. Bondarenko <tim@ipi.ac.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix NULL dereference in hda_generic.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>