- 19 7月, 2007 5 次提交
-
-
由 Tony Wan 提交于
Using Encore's key codes, we needn't add any additional key table. Signed-off-by: NTony Wan <wankai@sjtu.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Tony Wan 提交于
Support the 10moons TM300 TV card (so called TV Master 3), which is a 10moons saa7130 based board. Here not include features for the IR-remote. It has been tested using TVTIME. The card was auto-detected and all the input sources worked correct with sound. Signed-off-by: NTony Wan <wankai@sjtu.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
removed mt352_aver777_tuner_calc_regs, using dvb_pll_attach, instead. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch removes duplicate code from cx88-dvb and saa7134-dvb that handles rf input switching for the TUV1236d tuner. The functionality is added to dvb-pll, where all the other code that handles the TUV1236d is kept. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Rename dvb_pll_desc.setbw() to set(), and accept struct dvb_frontend_parameters instead of passing both freq and bandwidth, so that this may be used as a generic function. In order to do this, dvb_pll_configure must also be altered in the same manner, to take struct dvb_frontend_parameters instead of freq and bandwidth. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 29 6月, 2007 1 次提交
-
-
由 Jeff Mahoney 提交于
This patch changes the test for the thread pid from >= 0 to > 0. When the saa8134 driver initialization fails after a certain point, it goes through the complete shutdown process for the driver. Part of shutting it down includes tearing down the thread for tv audio. The test for tearing down the thread tests for >= 0. Since the dev structure is kzalloc'd, the test will always be true if we haven't tried to start the thread yet. We end up waiting on pid 0 to complete, which will never happen, so we lock up. This bug was observed in Novell Bugzilla 284718, when request_irq() failed. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 3 次提交
-
-
由 James T Klaas 提交于
Maintainer's notice: I needed to re-number the board, since the board number conflicted with a patch committed previously. Signed-off-by: NJames T Klaas <jklaas@appalachian.dyndns.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Simon Farnsworth 提交于
Add support for the "Elitegroup ECS TVP3XP FM1246", the "KWorld DVB-T 210", and the Animation Technologies LR214 Rev F onwards (SAA7131) to the saa7134 driver. Also rename the LR214WF to the LR214 Rev E or ealier (SAA7135), to match what we've seen on boards in the field. Changed the comment on the Lifeview cards to indicate Rev E and earlier versus Rev F and later, together with a chip indicator, following feedback from Peter Missel <peter.missel@onlinehome.de>. Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2007 25 次提交
-
-
由 Ed Vipas 提交于
This patch just defines the remote control type. Signed-off-by: NEd Vipas <epvipas@gmail.com> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
When the tuner is attached, the tda10046 is not initilized yet, so it is searching for its firmware. If the tuner is attached to the tda10046 silent i2c port, a bus collision can occur. Now the version is probed during the first init or sleep call. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Damian Minkov 提交于
Fix audio input source for capturing(playing) audio on AverTv Go 007 cards. Signed-off-by: NDamian Minkov <damencho@damencho.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The new name fits to what it is and what is on the box. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
There are 2 new entries for p7131 boards and one correction for a board with LNA. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
Static locals should not be changed - the original contents gets lost. Thanks to Trent Piepho for pointing me to this. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
Besides power saving, this puts the AGC output of the tda8290 to tristate. This is necessary for some hybrid boards which don't use a multiplexer for the AGC Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error with CONFIG_MODULES=n: CC drivers/media/video/saa7134/saa7134-core.o /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979:24: error: macro "request_submodules" passed 1 arguments, but takes just 0 /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c: In function 'saa7134_initdev': /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: 'request_submodules' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: for each function it appears in.) make[5]: *** [drivers/media/video/saa7134/saa7134-core.o] Error 1 Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Change some debug messages from printk() to dprintk(). Add KERN_WARNING and KERN_ERR level indicators to other printk()s that lacked them. Format printk lines with consistent ("%s/dvb: ", dev->name) prefix. Fixed dprintk macro, which had an if with no else that wasn't protected with a do {} while(0) block. That leads to "if(...) dprintk(); else" not doing what one would expect. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Acked-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
- The i2c data buffer in tda827xa_set_params was 1 byte too short - saa7134-dvb now gives an error mesage if tda827x could not be attached - coding style fix in tda1004x.c Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Peter Missel 提交于
It is a Lifeview Duo with a different ID Signed-off-by: NPeter Missel <peter.missel@onlinehome.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Heikki Orsila 提交于
- use generic sort instead of bubblesort - removed useless saa7134_video_fini function - small coding style changes Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
this patch fixes request_module_depend() Signed-off-by: NMarkus Rechberger <markus.rechberger@amd.com> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This change supplies a more generic version of the tuner callback. The tuner struct now has a function pointer int (*tuner_callback) (void *dev, int command, int arg) additionally to a int config parameter. both can be set through the TUNER_SET_TYPE_ADDR client call. Note that the meaning of the parameters depend on the tuner type. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This is for better consistency with other drivers Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The hardware is completely initialized afterwards, especially the tda10046 has its firmware - which is also necessary in analog mode of some hybrid boards. Calling the sleep function afterwards saves power and definitely puts hybrid boards into analog mode without additional code elsewere. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
During tuner attach, the pointers to host dev structure are not set yet, so the I2c adapter needs to be accessed differently. This patch also does some minor cleanup in the saa7134-dvb module. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The patch moves the tda827x dvb tuning code to a separate module Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Peter Missel 提交于
There are card variants supporting FM radio through tda8275. Signed-off-by: NPeter Missel <peter.missel@onlinehome.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This patch contains - new tuning code for the tda827xa silicon tuner. - controls the preamplifier of some boards with this tuner. - support for the Philips Tiger S hybrid DVB-T reference design. - reworked the saa7134-dvb modulue to get rid of most of the small board specific functions. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
These entries mainly are to support configurations of the tda827x silicon tuner with a preamplifier. The values can be set throgh the attach inform or through the extended TUNER_SET_TYPE_ADDR client call. The function pointer will only be updated if the parameter is not NULL. Since a typecast is necessary to set the pointer, i added a typedef for this pointer (tuner_gpio_func_t) in tuner.h Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This function allows to set, clear and tristate the GPIO ports. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
There are the following changes: - separate configuration of IF and GPIOs. - set GPIOs before firmware load. This helps to avoid I2C address collisions. - if desired invert GPIOs at sleep (automatic return to analog mode of card). - added 3 tuner configuration bytes to config stuct. - added i2c gate address to config struct. - moved _state struct declaration to header file to make it accessible on board layer. - added "conf_probed" to the state struct to allow i.e. probing for correct tuner version. - changed firmware load mechanism to always: + check if already loaded + try to boot from eeprom + try downlad from host - corrected name of tda10046 firmware image (backward compatible). Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 2月, 2007 6 次提交
-
-
由 Richard Knutsson 提交于
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The out of tree v4l-dvb build system didn't always override the kernel's configuration settings with v4l-dvb's settings correctly. To work around this, makefiles would define some new macro based on the setting of a config variable. e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set. The v4l-dvb build system should now always override correctly, and this is no longer necessary. This patch gets ride of these extra defines and just uses the CONFIG_* settings directly. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Add support for Terratec Cinergy HT PCI Signed-off-by: NGiorgio Moscardi <software@sukkology.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error: <-- snip --> ... LD drivers/media/video/built-in.o drivers/media/video/saa7134/built-in.o:(.data+0x85ec): multiple definition of `ir_rc5_remote_gap' drivers/media/video/bt8xx/built-in.o:(.data+0x734c): first defined here drivers/media/video/saa7134/built-in.o:(.data+0x85f0): multiple definition of `ir_rc5_key_timeout' drivers/media/video/bt8xx/built-in.o:(.data+0x7350): first defined here make[4]: *** [drivers/media/video/built-in.o] Error 1 <-- snip --> Since this variables were needlessly global, this patch implements the trivial fix of making them static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Juan Pablo Sormani 提交于
Signed-off-by: NJuan Pablo Sormani <sorman@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Walter 提交于
Add a board definition for the Encore ENL-TV card, and adds its PCI subdevice to the ID table. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-