fix warning:

  arch/x86/kernel/early_printk.c:993: warning: ‘enable_debug_console’ defined but not used

Eliminate dead code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

arch/x86/kernel/early_printk.c:404:13: warning: incorrect type in assignment (different base types)
arch/x86/kernel/early_printk.c:404:13:    expected restricted __le16 [assigned] [usertype] wValue
arch/x86/kernel/early_printk.c:404:13:    got int [signed] value
arch/x86/kernel/early_printk.c:405:13: warning: incorrect type in assignment (different base types)
arch/x86/kernel/early_printk.c:405:13:    expected restricted __le16 [assigned] [usertype] wIndex
arch/x86/kernel/early_printk.c:405:13:    got int [signed] index
arch/x86/kernel/early_printk.c:406:14: warning: incorrect type in assignment (different base types)
arch/x86/kernel/early_printk.c:406:14:    expected restricted __le16 [assigned] [usertype] wLength
arch/x86/kernel/early_printk.c:406:14:    got int [signed] size
arch/x86/kernel/early_printk.c:845:16: warning: Using plain integer as NULL pointer
arch/x86/kernel/early_printk.c:992:13: warning: symbol 'enable_debug_console' was not declared. Should it be static?
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

 arch/x86/kernel/built-in.o: In function `nvidia_set_debug_port':
 early_printk.c:(.text+0xf8b1): undefined reference to `read_pci_config'
 early_printk.c:(.text+0xf8dc): undefined reference to `write_pci_config'
 arch/x86/kernel/built-in.o: In function `setup_early_printk':
 early_printk.c:(.init.text+0x5487): undefined reference to `early_pci_allowed'
 early_printk.c:(.init.text+0x54cb): undefined reference to `read_pci_config'
 early_printk.c:(.init.text+0x54ec): undefined reference to `read_pci_config_16'
 [...]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

based on work from Eric, and add some timeout so don't dead loop when debug
device is not installed

v2: fix checkpatch warning
v3: move ehci struct def to linux/usrb/ehci_def.h from host/ehci.h
    also add CONFIG_EARLY_PRINTK_DBGP to disable it by default
v4: address comments from Ingo, seperate ehci reg def moving to another patch
    also add auto detect port that connect to debug device for Nvidia
    southbridge
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Arjan van de Ven" <arjan@infradead.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Greg KH" <greg@kroah.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

prepare x86: usb debug port early console

move ehci struct def to linux/usrb/ehci_def.h from host/ehci.h
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Arjan van de Ven" <arjan@infradead.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Greg KH" <greg@kroah.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The new code in commit 5cbf1565
has a bug in the version supporting the AMD 'syscall' instruction.
It clobbers the user's %ecx register value (with the %ebp value).

This change fixes it.
Signed-off-by: NRoland McGrath <roland@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipsec: ipcomp - Decompress into frags if necessary
  ipsec: ipcomp - Merge IPComp implementations
  pkt_sched: Fix locking in shutdown_scheduler_queue()

Compile error on other architectures:

    CC      drivers/mfd/tc6393xb.o
  /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c: In function ‘tc6393xb_attach_irq’:
  /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c:324: error: implicit declaration of function ‘set_irq_flags’
  ...
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix boot problem due to AT_BASE_PLATFORM change

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Wire up new system calls.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Wire up new system calls

Introduced by commit aaca0bdc ("flag
parameters: paccept"):

  net/socket.c:1515:17: error: symbol 'sys_paccept' redeclared with different type (originally declared at include/linux/syscalls.h:413) - incompatible argument 4 (different address spaces)
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 9115d134 ("powerpc: Enable
AT_BASE_PLATFORM aux vector") broke boot on 32-bit powerpc systems; we
have to use PTRRELOC to initialize powerpc_base_platform this early in
boot.

Bug reported by Jon Smirl.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This wires up the recently added Wire up signalfd4, eventfd2,
epoll_create1, dup3, pipe2, and inotify_init1 system calls.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.infradead.org/embedded-2.6:
  Make console charset translation optional

* git://git.infradead.org/~dwmw2/random-2.6:
  remove dummy asm/kvm.h files
  firmware: create firmware binaries during 'make modules'.

These got unintentionally moved, put them back as x86 provides its own
versions.
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the dummy asm/kvm.h files on architectures not (yet)
supporting KVM and uses the same conditional headers installation as
already used for a.out.h .

Also removed are superfluous install rules in the s390 and x86 Kbuild
files (they are already in Kbuild.asm).
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

fix:

arch/x86/ia32/built-in.o: In function `ia32_sys_call_table':
(.rodata+0xa38): undefined reference to `compat_sys_signalfd4'

on !CONFIG_SIGNALFD.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

on !CONFIG_SYSCTL on x86 with latest -git i get:

     mm/hugetlb.c: In function 'decrement_hugepage_resv_vma':
     mm/hugetlb.c:83: error: 'reserve' undeclared (first use in this function)
     mm/hugetlb.c:83: error: (Each undeclared identifier is reported only once
     mm/hugetlb.c:83: error: for each function it appears in.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This means that we no longer need write access to the source tree while
doing 'make modules_install'.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
  powerpc: Wireup new syscalls
  Move update_mmu_cache() declaration from tlbflush.h to pgtable.h
  powerpc/pseries: Remove kmalloc call in handling writes to lparcfg
  powerpc/pseries: Update arch vector to indicate support for CMO
  ibmvfc: Add support for collaborative memory overcommit
  ibmvscsi: driver enablement for CMO
  ibmveth: enable driver for CMO
  ibmveth: Automatically enable larger rx buffer pools for larger mtu
  powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O
  powerpc/pseries: vio bus support for CMO
  powerpc/pseries: iommu enablement for CMO
  powerpc/pseries: Add CMO paging statistics
  powerpc/pseries: Add collaborative memory manager
  powerpc/pseries: Utilities to set firmware page state
  powerpc/pseries: Enable CMO feature during platform setup
  powerpc/pseries: Split retrieval of processor entitlement data into a helper routine
  powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg
  powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines
  powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg
  powerpc: Fix compile error with binutils 2.15
  ...

Fixed up conflict in arch/powerpc/platforms/52xx/Kconfig manually.

* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6: (22 commits)
  UBI: always start the background thread
  UBI: fix gcc warning
  UBI: remove pre-sqnum images support
  UBI: fix kernel-doc errors and warnings
  UBI: fix checkpatch.pl errors and warnings
  UBI: bugfix - do not torture PEB needlessly
  UBI: rework scrubbing messages
  UBI: implement multiple volumes rename
  UBI: fix and re-work debugging stuff
  UBI: amend commentaries
  UBI: fix error message
  UBI: improve mkvol request validation
  UBI: add ubi_sync() interface
  UBI: fix 64-bit calculations
  UBI: fix LEB locking
  UBI: fix memory leak on error path
  UBI: do not forget to free internal volumes
  UBI: fix memory leak
  UBI: avoid unnecessary division operations
  UBI: fix buffer padding
  ...

The new type checking of the flags arguments to irqsave and friends
(commit 3f307891) pointed out this thing
with a big nice warning.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert PCI err device from platform to open firmware of_dev to comply
with powerpc schemes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixup of missing bit 0 on 64360 PCIx_ERR_MASK and errata FEr-#11 and
FEr-#16 for the 64460.  Bit 0 must remain 0.
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update get_property() call to use of_get_property() in order to fix compile
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This module harvests more than just memory errors, it also harvests
various bus and dma errors that the Chipset detects.  Previously, it would
report all such errors, which would cause output to be TOO loud.

This patches therefore adds a parameter which is used to turn off
NON-MEMORY error reports by default.  Or the reporting can be enabled via
the parameter

Also did code style cleanup: less than 80 characters per line rule
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The channel DIMM label does not seem to be used much in the edac code.
However, where it is used (in the core code), it is assumed to not have a
newline embedded.  This leaves the sysfs file newline free which looks
funny when cat'ing it.  Here we just add the trailing newline to the sysfs
chX_dimm_label output...

[Doug Thompson note: the DIMM label is one of the primary uses of EDAC.
User space daemon scripts, edac-utils@sourceforge, populate the DIMM label
fields, via /sys/devices/system/edac attributes, with the silk screen
labels of the motherboard in use.  dmidecode access BIOS tables, but BIOS
tables are well known to be incorrect and useless in these respects.
edac-utils will strip off any newlines before its use of the output, when
displaying DIMM slot silk screen labels.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Static kobjects and ksets are not supported in Linux kernel.  Convert the
mc_kset from static to dynamic.  This patch depends on my previous patch
to remove the module parameter attributes from mc...
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/sys/devices/system/edac/mc has a few files which are duplicated in
/sys/module/edac_core/parameters.  Now that all the functionality is
duplicated between these two locations, we remove the former kobject
attributes and update the documentation.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When updating the edac_mc_poll_msec module parameter from the sysfs
/sys/module/edac_core/parameters/edac_mc_poll_msec file, we don't update
the workq timers.  So that, if we move from a big poll time to a small
one, the small one won't take effect until the big one has timed out.

Here we provide a new module parameter set method to call out to the
update routine.  This brings the /sys/module/edac_core/parameters
functionality up to that provided by the /sys/drivers/system/edac/mc sysfs
module parameter files so that we can remove them or at least link to the
/sys/module files...
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Static kobjects are not supported in linux kernel.  Convert the
edac_pci_top_main_kobj from static to dynamic.  This avoids the double
free of the edac_pci_top_main_kobj.name that we see on module reload of
the e752x edac driver (and probably others as well).

In addition Greg KH <greg@kroah.com> has pointed out that this code may be
cleaned up significantly.  I will look at that as a follow-on patch, for
now, I just want the minimum fix to get this double-free oops bug
squashed...

Many thanks to Greg KH for his patience in showing me what the
Documentation/kobject.txt already said (oops)...
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some code cleanliness issues found by Andrew Morton (thanks!) which should
not affect functionality, but which should help make the code more
maintainable.

In particular, we now:

* convert all #define's w/ a parameter to static inlines
* use 1UL rather than 1ULL when calculating an unsigned long
* use pci_disable_device

The resulting code is tested and seems to work fine...
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Explicitly unmask ECC errors we are interested in reporting.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is possible that the BIOS did not enable ECC at boot time.  We check
for that case and fail to load if it is true.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The error mask we use to trigger ECC notifications is missing many bits of
interest.  We add these bits here so that all possible ECC errors can be
reported.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Preliminary support for the Intel 5100 MCH.  CE and UE errors are reported
along with the current DIMM label information and other memory parameters.

Reasons why this is preliminary:

1) This chip has 2 independent memory controllers which, for best
   perforance, use interleaved accesses to the DDR2 memory.  This
   architecture does not map very well to the current edac data structures
   which depend on symmetric channel access to the interleaved data.
   Without core changes, the best I could do for now is to map both memory
   controllers to different csrows (first all ranks of controller 0, then
   all ranks of controller 1).  Someone much more familiar with the edac
   core than I will probably need to come up with a more general data
   structure to handle the interleaving and de-interleaving of the two
   memory controllers.

2) I have not yet tackled the de-interleaving of the rank/controller
   address space into the physical address space of the CPU.  There is
   nothing fundamentally missing, it is just ending up to be a lot of
   code, and I'd rather keep it separate for now, esp since it doesn't
   work yet...

3) The code depends on a particular i5100 chip select to DIMM mainboard
   chip select mapping.  This mapping seems obvious to me in order to
   support dual and single ranked memory, but it is not unique and DIMM
   labels could be wrong on other mainboards.  There is no way to query
   this mapping that I know of.

4) The code requires that the i5100 is in 32GB mode.  Only 4 ranks per
   controller, 2 ranks per DIMM are supported.  I do not have hardware
   (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks
   per controller) mode.

5) The serial presence detect code should be broken out into a "real"
   i2c driver so that decode-dimms.pl can work.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If fuse filesystem doesn't define it's own lock operations, then allow the
lock manager to work with fuse.

Adding lockd support for remote locking is also possible, but more rarely
used, so leave it till later.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>