- 09 3月, 2012 6 次提交
-
-
由 Jiri Slaby 提交于
The macro is always defined now. This was there only for historical reasons. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Slaby 提交于
Note that tty->ops->shutdown is called from whatever context the user drops the last tty reference from. E.g. if one takes a reference in an ISR, tty close happens on other CPU and the final tty put is from the ISR, tty->ops->shutdown will be called from that hard irq context. We would have a problem in vt if we start using tty refcounting from other contexts than user there. It is because vt's shutdown uses mutexes. This is yet to be fixed. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Slaby 提交于
By using ASYNC_SPD_MASK instead of the single speed bits. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Slaby 提交于
It was added back in 2004 and never used for anything real. Remove the only assignment in the tree as well. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Slaby 提交于
Like the rest of the kernel, make a stub from alloc_tty_driver which calls __alloc_tty_driver with proper owner. This will save us one more assignment on the driver side. Also this fixes some drivers which didn't set the owner. This allowed user to remove the module from the system even though a tty from the driver is still open. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Cox 提交于
Keyboard struct lifetime is easy, but the locking is not and is completely ignored by the existing code. Tackle this one head on - Make the kbd_table private so we can run down all direct users - Hoick the relevant ioctl handlers into the keyboard layer - Lock them with the keyboard lock so they don't change mid keypress - Add helpers for things like console stop/start so we isolate the poking around properly - Tweak the braille console so it still builds There are a couple of FIXME locking cases left for ioctls that are so hideous they should be addressed in a later patch. After this patch the kbd_table is private and all the keyboard jiggery pokery is in one place. This update fixes speakup and also a memory leak in the original. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 2月, 2012 1 次提交
-
-
由 Alan Cox 提交于
First step to debletcherising the vt console layer - pick a victim and fix the locking This is a nice simple object with its own rules so lets pick it out for treatment. The user of the table already has a lock so we will also use the same lock for updates. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 2月, 2012 1 次提交
-
-
由 Paul Gortmaker 提交于
There are multiple users of this file from different source paths now, and rather than have ../ paths in include statements, just move the file to the linux header dir. Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 2月, 2012 1 次提交
-
-
由 Tobias Klauser 提交于
The function has no users inside the tree and the nios2 (out-of-mainline) port doesn't use it either (anymore). Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 2月, 2012 1 次提交
-
-
由 Heiko Carstens 提交于
Setting the task name is done within setup_new_exec() by accessing bprm->filename. However this happens after flush_old_exec(). This may result in a use after free bug, flush_old_exec() may "complete" vfork_done, which will wake up the parent which in turn may free the passed in filename. To fix this add a new tcomm field in struct linux_binprm which contains the now early generated task name until it is used. Fixes this bug on s390: Unable to handle kernel pointer dereference at virtual kernel address 0000000039768000 Process kworker/u:3 (pid: 245, task: 000000003a3dc840, ksp: 0000000039453818) Krnl PSW : 0704000180000000 0000000000282e94 (setup_new_exec+0xa0/0x374) Call Trace: ([<0000000000282e2c>] setup_new_exec+0x38/0x374) [<00000000002dd12e>] load_elf_binary+0x402/0x1bf4 [<0000000000280a42>] search_binary_handler+0x38e/0x5bc [<0000000000282b6c>] do_execve_common+0x410/0x514 [<0000000000282cb6>] do_execve+0x46/0x58 [<00000000005bce58>] kernel_execve+0x28/0x70 [<000000000014ba2e>] ____call_usermodehelper+0x102/0x140 [<00000000005bc8da>] kernel_thread_starter+0x6/0xc [<00000000005bc8d4>] kernel_thread_starter+0x0/0xc Last Breaking-Event-Address: [<00000000002830f0>] setup_new_exec+0x2fc/0x374 Kernel panic - not syncing: Fatal exception: panic_on_oops Reported-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 2月, 2012 1 次提交
-
-
由 Venkatesh Pallipadi 提交于
Looks like change "PM QoS: Move and rename the implementation files" merged during the 3.2 development cycle made PM QoS depend on CONFIG_PM which depends on (PM_SLEEP || PM_RUNTIME). That breaks CPU C-states with kernels not having these CONFIGs, causing CPUs to spend time in Polling loop idle instead of going into deep C-states, consuming way way more power. This is with either acpi idle or intel idle enabled. Either CONFIG_PM should be enabled with any pm_qos users or the !CONFIG_PM pm_qos_request() should return sane defaults not to break the existing users. Here's is the patch for the latter option. [rjw: Modified the changelog slightly.] Signed-off-by: NVenkatesh Pallipadi <venki@google.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: stable@vger.kernel.org
-
- 04 2月, 2012 1 次提交
-
-
由 Peter Ujfalusi 提交于
Store the last used mclk configuration for the PLL. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 03 2月, 2012 4 次提交
-
-
由 Kuninori Morimoto 提交于
The usb/ch9.h will be installed to /usr/include/linux, and be used from user space. But le16_to_cpu() is only defined for kernel code. Without this patch, user space compile will be broken. Special thanks to Stefan Becker Cc: stable@vger.kernel.org # 3.2 Reported-by: NStefan Becker <chemobejk@gmail.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Josh Triplett 提交于
Signed-off-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
There are currently many cut&paste copies of what tty_driver_install_tty does when custom ->install method is not provided. Let's get rid of the copies and create a helper with this setup code. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Havard Skinnemoen <hskinnemoen@google.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Christopher Yeoh 提交于
This fixes the race in process_vm_core found by Oleg (see http://article.gmane.org/gmane.linux.kernel/1235667/ for details). This has been updated since I last sent it as the creation of the new mm_access() function did almost exactly the same thing as parts of the previous version of this patch did. In order to use mm_access() even when /proc isn't enabled, we move it to kernel/fork.c where other related process mm access functions already are. Signed-off-by: NChris Yeoh <yeohc@au1.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 2月, 2012 4 次提交
-
-
由 Kuninori Morimoto 提交于
The usb/ch9.h will be installed to /usr/include/linux, and be used from user space. But le16_to_cpu() is only defined for kernel code. Without this patch, user space compile will be broken. Special thanks to Stefan Becker Reported-by: NStefan Becker <chemobejk@gmail.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Artem Bityutskiy 提交于
This patch fixes merge conflict resolution breakage introduced by merge d3712b9d ("Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream"). The commit changed 'mtd_can_have_bb()' function and made it always return zero, which is incorrect. Instead, we need it to return whether the underlying flash device can have bad eraseblocks or not. UBI needs this information because it affects how it handles the underlying flash. E.g., if the underlying flash is NOR, it cannot have bad blocks and any write or erase error is fatal, and all we can do is to switch to R/O mode. We do not need to reserve a pool of good eraseblocks for bad eraseblocks handling, and so on. This patch also removes 'mtd_can_have_bb()' invocations from Logfs to ensure correct Logfs behavior. I've tested that with this patch UBI works on top of NOR and NAND flashes emulated by mtdram and nandsim correspondingly. This patch is based on patch from Linus Torvalds. Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: NJörn Engel <joern@logfs.org> Acked-by: NPrasad Joshi <prasadjoshi.linux@gmail.com> Acked-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Stübner 提交于
A struct device parameter is used in the enable and disable callbacks to distinguish between different gpio_keys devices. Platforms that don't use these callbacks may not include struct device at all, as seen on arch/arm/mach-s3c2410/mach-n30.c Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Guennadi Liakhovetski 提交于
Add a flag to allow platforms to specify, whether a DMAC instance supports the MEMCPY operation. To avoid regressions, preserve the current default. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>
-
- 01 2月, 2012 1 次提交
-
-
由 Dmitry Kasatkin 提交于
MPI_NULL is replaced with normal NULL. Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com> Reviewed-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 30 1月, 2012 2 次提交
-
-
由 Artem Bityutskiy 提交于
Commits 3fe4bae8 and 079c985e broke MTD suspend in 2 ways: 1. When the '->suspend' method is not present, we return -EOPNOTSUPP, but the callers of 'mtd_suspend()' expects 0 instead. 2. Checking of the 'mtd' parameter against NULL has been incorrectly removed in 'mtd_cls_suspend()'. This patch fixes the breakages. This has been found, analyzed, reported and tested by Rafael J. Wysocki <rjw@sisk.pl>. Note, this patch is not needed in the stable tree because it causes a regression introduced during the v3.3 merge window. Reported-by: NRafael J. Wysocki <rjw@sisk.pl> Tested-by: NRafael J. Wysocki <rjw@sisk.pl> Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Rafael J. Wysocki 提交于
Commit 2aede851 PM / Hibernate: Freeze kernel threads after preallocating memory introduced a mechanism by which kernel threads were frozen after the preallocation of hibernate image memory to avoid problems with frozen kernel threads not responding to memory freeing requests. However, it overlooked the s2disk code path in which the SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE, which caused freeze_workqueues_begin() to BUG(), because it saw that worqueues had been already frozen. Although in principle this issue might be addressed by removing the relevant BUG_ON() from freeze_workqueues_begin(), that would reintroduce the very problem that commit 2aede851 attempted to avoid into that particular code path. For this reason, to fix the issue at hand, introduce thaw_kernel_threads() and make the SNAPSHOT_FREE ioctl execute it. Special thanks to Srivatsa S. Bhat for detailed analysis of the problem. Reported-and-tested-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: stable@kernel.org
-
- 27 1月, 2012 2 次提交
-
-
由 Stephane Eranian 提交于
This patch fixes the sampling interrupt throttling mechanism. It was broken in v3.2. Events were not being unthrottled. The unthrottling mechanism required that events be checked at each timer tick. This patch solves this problem and also separates: - unthrottling - multiplexing - frequency-mode period adjustments Not all of them need to be executed at each timer tick. This third version of the patch is based on my original patch + PeterZ proposal (https://lkml.org/lkml/2012/1/7/87). At each timer tick, for each context: - if the current CPU has throttled events, we unthrottle events - if context has frequency-based events, we adjust sampling periods - if we have reached the jiffies interval, we multiplex (rotate) We decoupled rotation (multiplexing) from frequency-mode sampling period adjustments. They should not necessarily happen at the same rate. Multiplexing is subject to jiffies_interval (currently at 1 but could be higher once the tunable is exposed via sysfs). We have grouped frequency-mode adjustment and unthrottling into the same routine to minimize code duplication. When throttled while in frequency mode, we scan the events only once. We have fixed the threshold enforcement code in __perf_event_overflow(). There was a bug whereby it would allow more than the authorized rate because an increment of hwc->interrupts was not executed at the right place. The patch was tested with low sampling limit (2000) and fixed periods, frequency mode, overcommitted PMU. On a 2.1GHz AMD CPU: $ cat /proc/sys/kernel/perf_event_max_sample_rate 2000 We set a rate of 3000 samples/sec (2.1GHz/3000 = 700000): $ perf record -e cycles,cycles -c 700000 noploop 10 $ perf report -D | tail -21 Aggregated stats: TOTAL events: 80086 MMAP events: 88 COMM events: 2 EXIT events: 4 THROTTLE events: 19996 UNTHROTTLE events: 19996 SAMPLE events: 40000 cycles stats: TOTAL events: 40006 MMAP events: 5 COMM events: 1 EXIT events: 4 THROTTLE events: 9998 UNTHROTTLE events: 9998 SAMPLE events: 20000 cycles stats: TOTAL events: 39996 THROTTLE events: 9998 UNTHROTTLE events: 9998 SAMPLE events: 20000 For 10s, the cap is 2x2000x10 = 40000 samples. We get exactly that: 20000 samples/event. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: <stable@kernel.org> # v3.2+ Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120126160319.GA5655@quadSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 1月, 2012 5 次提交
-
-
由 Konstantin Khlebnikov 提交于
After adding devpts multiple-insrances sysctl kernel.pty.max limit pty count for each devpts instance independently, while kernel.pty.nr shows total pty count. This patch restores sysctl kernel.pty.max as global limit (4096 by default), adds pty reseve for main devpts (mounted without "newinstance" argument), and new sysctl to tune it: kernel.pty.reserve (1024 by default) Also it adds devpts mount option "max=%d" to limit pty count for each devpts instance independently. (by default NR_UNIX98_PTY_MAX == 2^20) Thus devpts instances in containers cannot eat up all available pty even if we didn't set any limits, while with "max" argument we can adjust limits more precisely. Plus, now open("/dev/ptmx") return -ENOSPC in case lack of pty indexes, this is more informative than -EIO. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> -
由 Konstantin Khlebnikov 提交于
cleanup hack added in v2.6.27-3203-g15582d36 comment from that patch: : pty: If the administrator creates a device for a ptmx slave we should not error : : The open path for ptmx slaves is via the ptmx device. Opening them any : other way is not allowed. Vegard Nossum found that previously this was not : the case and mknod foo c 128 42; cat foo would produce nasty diagnostics : : Signed-off-by: Alan Cox <alan@redhat.com> : Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> devpts_get_tty() returns non-null only for inodes on devpts, but there is no inodes for master-devices, /dev/ptmx (/dev/pts/ptmx) is the only way to open them. Thus we can completely forbid lookup for master-devices and eliminate that hack in tty_init_dev() because tty_open() will get EIO from tty_driver_lookup_tty(). Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Pirko 提交于
This patch changes event message behaviour to send only updated records instead of whole list. This fixes bug on which userspace receives non-actual data in case multiple events occur in row. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning: Warning(include/linux/usb.h:1251): No description found for parameter 'num_mapped_sgs' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warnings: Warning(include/linux/device.h:299): No description found for parameter 'name' Warning(include/linux/device.h:299): No description found for parameter 'subsys' Warning(include/linux/device.h:299): No description found for parameter 'node' Warning(include/linux/device.h:299): No description found for parameter 'add_dev' Warning(include/linux/device.h:299): No description found for parameter 'remove_dev' Warning(include/linux/device.h:685): No description found for parameter 'id' Warning(include/linux/device.h:1009): No description found for parameter '__driver' Warning(include/linux/device.h:1009): No description found for parameter '__register' Warning(include/linux/device.h:1009): No description found for parameter '__unregister' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 1月, 2012 8 次提交
-
-
由 Alexander Shishkin 提交于
The way this driver was added by f0ae849d (usb: Add Intel Langwell USB OTG Transceiver Driver) never even compiled together with langwell_udc, and that's the only way for it to be useful. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@linux.intel.com> Cc: linux-usb@vger.kernel.org Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Stephen Rothwell 提交于
so move its include into fs.h inside the __KERNEL__ protection. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc notation warnings: Warning(include/linux/sched.h:2094): No description found for parameter 'p' Warning(include/linux/sched.h:2094): Excess function parameter 'tsk' description in 'is_idle_task' Warning(kernel/sched/cpupri.c:139): No description found for parameter 'newpri' Warning(kernel/sched/cpupri.c:139): Excess function parameter 'pri' description in 'cpupri_set' Warning(kernel/sched/cpupri.c:208): Excess function parameter 'bootmem' description in 'cpupri_init' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning: Warning(include/linux/usb.h:1251): No description found for parameter 'num_mapped_sgs' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warnings: Warning(include/linux/device.h:299): No description found for parameter 'name' Warning(include/linux/device.h:299): No description found for parameter 'subsys' Warning(include/linux/device.h:299): No description found for parameter 'node' Warning(include/linux/device.h:299): No description found for parameter 'add_dev' Warning(include/linux/device.h:299): No description found for parameter 'remove_dev' Warning(include/linux/device.h:685): No description found for parameter 'id' Warning(include/linux/device.h:1009): No description found for parameter '__driver' Warning(include/linux/device.h:1009): No description found for parameter '__register' Warning(include/linux/device.h:1009): No description found for parameter '__unregister' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Commit cc39c6a9 ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: NHugh Dickins <hughd@google.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Holzheu 提交于
kdump only allocates memory for the prstatus ELF note. For s390x, besides of prstatus multiple ELF notes for various different register types are stored. Therefore the currently allocated memory is not sufficient. With this patch the KEXEC_NOTE_BYTES macro can be defined by architecture code and for s390x it is set to the correct size now. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
sparc64 allmodconfig: In file included from include/linux/compat.h:15, from /usr/src/25/arch/sparc/include/asm/siginfo.h:19, from include/linux/signal.h:5, from include/linux/sched.h:73, from arch/sparc/kernel/asm-offsets.c:13: include/linux/fs.h:618: warning: parameter has incomplete type It seems that my sparc64 compiler (gcc-3.4.5) doesn't like the forward declaration of enums. Fix this by moving the "enum migrate_mode" definition into its own header file. Acked-by: NMel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 1月, 2012 2 次提交
-
-
由 Jean Delvare 提交于
It doesn't seem right for the thermal subsystem to export a symbol named generate_netlink_event. This function is thermal-specific and its name should reflect that fact. Rename it to thermal_generate_netlink_event. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NR.Durgadoss <durgadoss.r@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Greg Kroah-Hartman 提交于
Now that all users of 'struct sysdev' are removed from the kernel, we can safely remove the .h and .c files for this code, to ensure that no one accidentally starts to use it again. Many thanks for Kay who did all the hard work here on making this happen. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-