The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID
1a2c:0023 does not seem to be handling the reports initialization very well.
This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel
when connected, and a delay before its initialization.  This patch adds the
quirk for this device, which causes the delay to disappear.

[jkosina@suse.cz: remove superfluous comment and fix ordering]
Signed-off-by: NDaniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This touchpad seriously dislikes init reports, not only timeing out, but
also refusing to work after this.

Cc: stable@vger.kernel.org
Reported-and-tested-by: NVincent Fortier <th0ma7@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There is timeout error during initialization:
kernel: [   11.733104] hid-multitouch 0003:1870:0110.0001: usb_submit_urb(ctrl) failed: -1
kernel: [   11.734093] hid-multitouch 0003:1870:0110.0001: timeout initializing reports

Adding quirk HID_QUIRK_NO_INIT_REPORTS can solve the problem.
Signed-off-by: NYufeng Shen <miletus@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

[jkosina@suse.cz: refresh to apply after SIS quirk merging]
Signed-off-by: NEmanuel Krenz <emanuelkrenz@web.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add Synaptics HD touchscreen(06cb:1ac3) to no init report quirk
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add Synaptics HD touchscreen(06cb:0ac3) to no init report quirk.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

USB_VENDOR_ID_SIS and USB_VENDOR_ID_SIS2_TOUCH are identical,
so refine the code and merge the quirks.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for SiS multitouch panels.
Signed-off-by: NForest Bond <forest.bond@rapidrollout.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

BugLink: http://bugs.launchpad.net/bugs/1180881

This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS,
otherwise it causes 10 seconds timeout during report initialization.

[12431.828467] hid-multitouch 0003:0457:1013.0475: usb_submit_urb(ctrl) failed: -1
[12431.828507] hid-multitouch 0003:0457:1013.0475: timeout initializing reports
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

BugLink: http://bugs.launchpad.net/bugs/1180881

Synaptics large touchscreen doesn't support some of the report request
while initializing. The unspoorted request will make the device unreachable,
and will lead to the following usb_submit_urb() function call timeout.
So, add the IDs into HID_QUIRK_NO_INIT_REPORTS quirk.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The DuoSense touchscreen device causes a 10 second timeout. This fix
removes the delay.
Signed-off-by: NVasily Titskiy <qehgt0@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix build problem caused by typo introduced by 620ae90e
("HID: usbhid: quirk for MSI GX680R led panel").

Reported-by: fengguang.wu@intel.com
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This keyboard backlight device causes a 10 second delay to boot.  Add it
to the quirk list with HID_QUIRK_NO_INIT_REPORTS.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=907221

Cc: stable@vger.kernel.org
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS,
otherwise it causes 10 seconds timeout during report initialization.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587

Cc: stable@vger.kernel.org
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver
[IR605A/Q] to hid-ids.h and hid-quirks.c.  This IR receiver causes about a 10
second timeout when the usbhid driver attempts to initialze the device.  Adding
this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the
delay.
Signed-off-by: NNicholas Santos <nicholas.santos@gmail.com>
[jkosina@suse.cz: fix ordering]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The USB recovery mode present in i.MX23 ROM emulates USB HID.  It needs this
quirk to behave properly.

Even if the official branding of the chip is Freescale i.MX23, I named it
Sigmatel STMP3780 since that's what the chip really is and it even reports
itself as STMP3780.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support to Novatec wireless mouse (device ID 0603:1602).
Fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=47031Signed-off-by: NMarco Biscaro <marcobiscaro2112@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Without this, the device is blocked in dmesg at:
hid-multitouch 0003:25AA:8883.000X: usb_submit_urb(ctrl) failed: -1
hid-multitouch 0003:25AA:8883.000X: timeout initializing reports
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

For some reason, we had two IDs for the QUANTA 3001 touchscreen controller,
one USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001 and one
USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN. As this has caused
confusion, remove USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN
completely, and fix places where it was used to refer to
USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001.
Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch (as1603) adds a NOGET quirk for the Eaton Ellipse MAX UPS
device.  (The USB IDs were already present in hid-ids.h, apparently
under a different name.)
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NLaurent Bigonville <l.bigonville@edpnet.be>
CC: <stable@vger.kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The USB recovery mode present in i.MX28 ROM emulates USB HID.
It needs this quirk to behave properly.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Chen Peter <B29397@freescale.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Kosina <jkosina@suse.cz>
[jkosina@suse.cz: fix alphabetical ordering]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Sennheiser BTD500USB composit device requires the
HID_QUIRK_NOGET flag to be set for working proper. Without the
flag the device crashes during hid intialization.
Signed-off-by: NFrank Kunz <xxxxxmichl@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for Waltop Sirius Battery Free Tablet. VisTablet Muse and Princeton
PTB-S1BK are other possible names of this tablet.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Some quanta devices do not like to be polled for reports
descriptors, thus this quirk.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for three KYE tablets: EasyPen i405X, MousePen i608X, EasyPen M610X.
Update Kconfig entry accordingly, remove EXPERT dependency.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed
by AIREN.  This keyboard seems to have a lot of bugs; NOGET works
around only one of them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: Nokias <d.okias@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

CH Fighterstick requires HID_QUIRK_NOGET as many other CH devices do. This
patch adds device id for Fighterstick and adds necessary line to HID quirk
list.
Signed-off-by: NVille Ranki <ville.ranki@iki.fi>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add quirk for the Trio Linker Plus II - the adapter supports several
controllers simultaneously, generating a new HID entry for each connected
device.
Signed-off-by: NIgnaz Forster <ignaz.forster@gmx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]
Signed-off-by: NAaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

With module.h being implicitly everywhere via device.h, the absence
of explicitly including something for EXPORT_SYMBOL went unnoticed.
Since we are heading to fix things up and clean module.h from the
device.h file, we need to explicitly include these files now.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Support the following models: Super Joy Box 3 Pro, Super Dual Box Pro
and Super Joy Box 5 Pro. These models have support for pressure
sensitive buttons and they can force the controller to either digital
or analog mode, both of which are not supported yet.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Create each gamepad as a separate joystick
Signed-off-by: NClemens Werther <clemens.werther@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.

These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.
Signed-off-by: NJeremiah Matthey <sprg86@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Support force feedback on the Dual USB Force Feedback Joypad (MP-8866).
Signed-off-by: NSean Young <sean@mess.org>
Acked-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with
HID_QUIRK_MULTI_INPUT.

Originally the device is reporting the x,y coordinates on Z and RX. By adding
this quirk, there will be two kernel devices. The first one is muted and the
second device will report coordinates on X and Y.
Signed-off-by: NJimmy Hon <honyuenkwun@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Barcode handheld scanners produced by Symbol Technologies (0x05e0/0x0800
and 0x05e0/0x1300) need HID_QUIRK_NOGET, otherwise their firmware exposes
trouble during enumeration/initialization.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

CH Pro Throttle needs NOGET the same way as other products from
the same vendor require.
Reported-by: NUnavowed <unavowed@vexillium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device used the MULTI_INPUT quirk whereas it could be used
with hid-mosart instead to support the multitouch part.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for the media keys of the Perixx PERIBOARD-707 (Plus)
keyboard / remote control.
Signed-off-by: NDennis Kügler <dennis.kuegler@gmx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/Signed-off-by: NPierre BAILLY <pierre@substantiel.fr>
Signed-off-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>