- 06 10月, 2006 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This patch adds checking of the PCI_INTERRUPT_PIN register before using standard OF parsing to retreive PCI interrupts. The reason is that some PCI devices may have no PCI interrupt, though they may have interrupts attached via other means. In this case, we shall not use irq->pdev, but device-specific code can later retreive those interrupts instead. Without that patch, Maple and derivatives don't get the right interrupt for the second IDE channel as the linux IDE code fallsback to the PCI irq instead of trying to use the legacy ones for the on-board controller (which has no PCI_INTERRUPT_PIN). Having no PCI IRQ assign to it (as it doesn't request any) fixes it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 8月, 2006 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Device-tree bugs on js20 with some versions of SLOF were causing the interrupt for IDE to not be parsed correctly and fail to boot. This patch adds a bit more sanity checking to the parser to detect some of those errors and fail instead of returning bogus information. The powerpc PCI code can then trigger a fallback that works on those machines. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 8月, 2006 1 次提交
-
-
由 Li Yang 提交于
Compile fails without defining CONFIG_PCI. The patch fix this. [paulus@samba.org: Moved of_irq_pci_swizzle so we only need one #ifdef] Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 31 7月, 2006 1 次提交
-
-
由 Jeremy Kerr 提交于
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc core changes. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 11 7月, 2006 1 次提交
-
-
由 Segher Boessenkool 提交于
This patch fixes a bit of boundchecking in the new Open Firmware interrupt tree parsing code. It's important that it fails when things aren't correct in order to trigger fallback mecanisms that are necessary to make some machines work properly. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 7月, 2006 1 次提交
-
-
由 Jeremy Kerr 提交于
The of_bus callbacks map and get_flags can be constified, as they don't alter the range or addr arguments. of_dump_addr and of_read_addr can also be constified. Built for 32- and 64-bit powerpc Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Adds new routines to prom_parse to walk the device-tree for interrupt information. This includes both direct mapping of interrupts and low level parsing functions for use with partial trees. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 6月, 2006 1 次提交
-
-
由 Will Schmidt 提交于
My js20 appears to lack the ibm,#dma- properties, and boot fails with a "Kernel panic - not syncing: iommu_init_table: Can't allocate 0 bytes" message. This adds a fallback to the "#address-cells" property in case the "#ibm,dma-address-cells" property is missing. Tested on js20 and power5 lpar. Unless there is a more elegant solution... :-) Signed-off-by: NWill Schmidt <willschm@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 19 5月, 2006 1 次提交
-
-
由 Jeremy Kerr 提交于
Add a function for generic parsing of dma-window properties (ie, ibm,dma-window and ibm,my-dma-window) of pci and virtual device nodes. This function will also be used by cell. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 2月, 2006 1 次提交
-
-
由 Olaf Hering 提交于
setup_peg2 must do some refcounting. of_get_pci_address may need to drop the node Pegasos l2cr : L2 cache was not active, activating PCI bus 0 controlled by pci at 80000000 Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32 Call Trace: [C037BD00] [C0007934] show_stack+0x5c/0x184 (unreliable) [C037BD30] [C000E068] program_check_exception+0x184/0x584 [C037BD90] [C000F5F0] ret_from_except_full+0x0/0x4c --- Exception: 700 at kref_get+0xc/0x24 LR = of_node_get+0x24/0x3c [C037BE50] [C004FD94] __pte_alloc_kernel+0x64/0x80 (unreliable) [C037BE70] [C000CA18] of_get_parent+0x34/0x58 [C037BE90] [C0009B18] of_get_address+0x24/0x174 [C037BED0] [C000A108] of_address_to_resource+0x24/0x68 [C037BF00] [C038B128] chrp_find_bridges+0x114/0x470 [C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c [C037BFB0] [C03849B0] setup_arch+0x144/0x188 [C037BFD0] [C037C45C] start_kernel+0x34/0x1a8 [C037BFF0] [000037A0] 0x37a0 Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32 Call Trace: [C037BC90] [C0007934] show_stack+0x5c/0x184 (unreliable) [C037BCC0] [C000E068] program_check_exception+0x184/0x584 [C037BD20] [C000F5F0] ret_from_except_full+0x0/0x4c --- Exception: 700 at kref_get+0xc/0x24 LR = of_node_get+0x24/0x3c [C037BDE0] [00000000] 0x0 (unreliable) [C037BE00] [C000CA18] of_get_parent+0x34/0x58 [C037BE20] [C0009CE8] of_translate_address+0x2c/0x2fc [C037BEA0] [C0009FE8] __of_address_to_resource+0x30/0xc4 [C037BED0] [C000A130] of_address_to_resource+0x4c/0x68 [C037BF00] [C038B128] chrp_find_bridges+0x114/0x470 [C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c [C037BFB0] [C03849B0] setup_arch+0x144/0x188 [C037BFD0] [C037C45C] start_kernel+0x34/0x1a8 [C037BFF0] [000037A0] 0x37a0 PCI bus 0 controlled by pci at c0000000 Top of RAM: 0x10000000, Total RAM: 0x10000000 Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 1月, 2006 1 次提交
-
-
由 Paul Mackerras 提交于
The first generation of PCI powermacs had a host bridge called /chaos which was for all intents and purposes a PCI host bridge, but has a device_type of "vci" in the device tree (presumably it's not really PCI at the hardware level or something). The OF parsing stuff in arch/powerpc/kernel/prom_parse.c currently doesn't recognize it as a PCI bridge, which means that controlfb.c can't get its device addresses. This makes prom_parse.c recognize a device_type of "vci" as indicating a PCI host bridge. With this, controlfb works again. Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 1月, 2006 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This fixes pci_address_to_pio() to return an unsigned long (to be safe) and fixes a bug in the implementation that caused it to return a bogus IO port number Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This updates the OF address parsers to return the IO flags indicating the type of address obtained. It also adds a PCI call for converting physical addresses that hit IO space into into IO tokens, and add routines that return the translated addresses into struct resource Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
The udbg low level io layer has an issue with udbg_getc() returning a char (unsigned on ppc) instead of an int, thus the -1 if you had no available input device could end up turned into 0xff, filling your display with bogus characters. This fixes it, along with adding a little blob to xmon to do a delay before exiting when getting an EOF and fixing the detection of ADB keyboards in udbg_adb.c Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Parsing addresses extracted from Open Firmware isn't a simple matter. We have various bits of code that try to do it in various place, including some heuristics in prom.c that pre-parse addresses at boot and fill device-nodes "addrs", but those are dodgy at best and I want to deprecate them. So this patch introduces a new set of routines that should be capable of parsing most types of addresses and translating them into CPU physical addresses. It currently works for things on PCI busses and ISA busses and should work on "standard" busses like the root bus or the MacIO bus that don't put funky flags in addresses. If you have other bus types that do use funky flags, you'll have to add new bus type translators, which is fairly easy. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-